journal article·2005-04

Evolution of surface recrystallization during indirect extrusion of 6xxx aluminum alloys

William H. Van Geertruyden, Heather M. Browne, Wojciech Z. Misiolek, Paul T. Wang

Publisher page

Abstract

The fundamentals of coarse grain surface recrystallized structure formation in extrusion of 6xxx aluminum alloys are not yet completely understood. The objective of this article is to understand the metallurgical origins and mechanisms of the formation of the peripheral coarse grain (PCG) structure as the first step to understanding surface behavior of extruded aluminum alloys. Small-scale indirect extrusion tests were performed in which deformation parameters of strain, strain rate, and temperature were closely controlled. The deformed material was characterized via traditional metallography and orientation imaging microscopy (OIM) in order to understand the influence of processing conditions and alloy chemistry on surface grain formation. It was found that decreasing recrystallization-inhibiting elements such as Cr as well as increasing the starting extrusion temperature, extrusion ratio, and ram speed all increased the depth of the PCG. Additionally, a mechanism for favorable coarse grain formation at the surface of the extrudate is proposed based on microstructure development during extrusion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. P. Saha: Aluminum Extrusion Technology, ASM INTERNATIONAL, Metals Park, OH, 2000, p. 26.10.31399/asm.tb.aet.9781627083362 ↗
2. X. Duan and T. Sheppard: TMS Annual Meeting: Hot Deformation of Aluminum Alloys, May 2003, TMS, Warrendale, PA, 2003, p. 99.
3. T. Furu and H.E. Vatne: Mater. Sci. Forum, 2000, vols. 331–337, p. 843.10.4028/www.scientific.net/MSF.331-337.843 ↗
4. W. Libura and J. Zasadzinski: Proc. 5th Aluminum Extrusion Technology Seminar ET ’92, Chicago, IL, 1992, vol. II, pp. 485–94.
5. H. Yang: Proc. 7th Aluminum Extrusion Technology Seminar ET ’00, Chicago, IL, 2000, vol. I, pp. 371–80.
6. N. Parson, S. Barker, A. Shalanski, and C. Jowett: Proc. 8th Aluminum Extrusion Technology Seminar ET ’04, Orlando, FL, 2004, vol. I, pp. 11–22.
7. Z. Peng and T. Sheppard: Proc. 8th Aluminum Extrusion Technology Seminar ET ’04, Orlando, FL, 2004, vol. I, pp. 79–91.
8. E. Sweet, S. Caraher, N. Danilova, and X. Zhang: Proc. 8th Aluminum Extrusion Technology Seminar ET ’04, Orlando, FL, 2004, vol. I, pp. 115–26.
9. W. Van Geertruyden, W. Misiolek, and P. Wang: ASM Conf., Pittsburgh, PA, Oct. 2003.
10. H. Valberg: Proc. 6th Int. Aluminum Extrusion Technology Seminar, Chicago, IL, 1996, vol. I, 95–100.
11. W.H. Van Geertruyden, W.Z. Misiolek, and P.T. Wang: unpublished research.
12. M. Lefstad and O. Reiso Vidar Johnsen: Proc. 5th Aluminum Extrusion Technology Seminar ET ’92, Chicago, IL, 1992, vol. I, p. 503.
13. H. Valberg: Proc. 5th Int. Aluminum Extrusion Technology Seminar, 1992, vol. 2, pp. 321–27.
14. R.D. Doherty, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. A238.10.1016/S0921-5093(97)00424-3 ↗
15. H. Yamagata: Acta Mater., 1995, vol. 43 (2), pp. 723–29.10.1016/0956-7151(94)00267-L ↗
16. K.J. Gardner and R. Grimes: Met. Sci., 1979, pp. 216–22.10.1179/msc.1979.13.3-4.216 ↗
17. H.J. McQueen and W. Blum: Mater. Sci. Eng. A, 2000, vol. 290 (1–2), pp. 95–107.10.1016/S0921-5093(00)00933-3 ↗
18. H.J. McQueen O. Knustad, N. Ryum, and J.K. Solberg: Scripta Mater., 1985, vol. 19, p. 73.10.1016/0036-9748(85)90268-6 ↗
19. F.J. Humphreys: Proc. 6th Int. Conf. of Strength of Metals and Alloys, E.D. Gifkins, Melbourne, Australia, 1982, vol. 1, p. 625.
20. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 53, p. 2685.10.1016/S1359-6454(03)00078-8 ↗
21. C. Chovet, S. Gourdet, and F. Montheillet: Mater. Sci. Forum, 2000, vols. 331–337, p. 733.10.4028/www.scientific.net/MSF.331-337.733 ↗
22. W.H. Van Geertruyden, W.Z. Misiolek, and P.T. Wang: 2005, unpublished research.
23. T. Pettersen, B. Holmedal, and E. Nes: Metall. Mater. Trans. A, 2003, vol. 34A, p. 2737.10.1007/s11661-003-0175-0 ↗