Laser Repair of Superalloy Single Crystals with Varying Substrate Orientations
Source abstract
Abstract
The casting and repair of single-crystal gas turbine blades require specific solidification conditions that prevent the formation of new grains, equiaxed or columnar, ahead of the epitaxial columnar dendrites. These conditions are best determined by microstructure modeling. Present day analytical models of the columnar-to-equiaxed transition (CET) relate the microstructure to local solidification conditions (temperature gradient and interface velocity) without taking into account the effects of (1) a preferred growth direction of the columnar dendrites and (2) a growth competition between columnar grains of different orientations. In this article, the infiuence of these effects on the grain structure of nickel-base superalloy single crystals, which have been resolidified after laser treatment or directionally cast, is determined by experiment and by analytical and numerical modeling. It is shown that two effects arise for the case of a nonzero angle between the local heat flux direction and the preferred dendrite growth axis: (1) the regime of equiaxed growth is extended and (2) a loss of the crystal orientation of the substrate often occurs by growth competition of columnar grains leading to an “oriented-to-misoriented transition” (OMT). The results are essential for the definition of the single-crystal processing window and are important for the service life extension of expensive components in land-based or aircraft gas turbines.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. M. Gäumann, P.-H. Jouneau, J.-D. Wagnière, and W. Kurz: Proc. Laser Assisted Net Shape Engineering, LANE’97, M. Geiger and F. Vollertsen, eds., Meisenbach, Bamberg, 1997, pp. 651-58.
2. Gäumann M., Henry S., Cléton F., Wagnière J.-D., and Kurz W. (1999) Mater. Sci. Eng., 271: 232-4110.1016/S0921-5093(99)00202-6 ↗
3. Gäumann M., Bezençon C., Canalis P., and Kurz W. (2001) Acta Mater., 49:1051-6210.1016/S1359-6454(00)00367-0 ↗
4. S. Mokadem, C. Bezençon, J.-M. Drezet, A. Jacot, J.-D.Wagnière, and W. Kurz: Solidification Processes and Microstructures: a Symp. in Honor of Wilfried Kurz, M. Rappaz, C. Beckermann, and R. Trivedi, eds., TMS, Warrendale, PA, 2004, pp. 67-75.
5. C. Bezençon, J.-D. Wagnière, M. Höbel, A. Schnell, M. Konter, and W. Kurz: Proc. Materials for Advanced Power Engineering, 7th COST Conf., Jülich, 2002, J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, eds., Liège, 2002, pp. 503-10.
6. Bezençon C., Schnell A., and Kurz W. (2003) Scripta Mater., 49:705-0910.1016/S1359-6462(03)00369-5 ↗
7. Kurz W. (2001) Adv. Eng. Mater., 3:443-5210.1002/1527-2648(200107)3:7<443::AID-ADEM443>3.0.CO;2-W ↗
8. Gäumann M., Trivedi R., and Kurz W. (1997) Mater. Sci. Eng., A226 (228):763-6910.1016/S0921-5093(97)80081-0 ↗
9. Hunt J.D. (1984) Mater. Sci. Eng., 65:75-8310.1016/0025-5416(84)90201-5 ↗
10. David S.A., Vitek J.M., Babu S.S., Boatner L.A., and Reed R.W. (1997) Sci. Technol. Welding Joining, 2:79-8810.1179/stw.1997.2.2.79 ↗
11. Vitek J.M., David S.A., and Boatner L.A. (1997) Sci. Technol. Welding Joining, 2:109-1810.1179/stw.1997.2.3.109 ↗
12. Parkv, Babu S.S., Vitek J.M., Kenik E.A., and David S.A. (2003) J. Appl. Phys., 94: 4203-0910.1063/1.1602950 ↗
13. Vitek J.M. (2005) Acta Mater., 53:53-6710.1016/j.actamat.2004.08.039 ↗
14. Picasso M., Marsden C.F., Wagnière J.-D., Frenk A., and Rappaz M. (1994) Metall. Mater. Trans. B, 25B:281-9110.1007/BF02665211 ↗
15. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Chapman and Hall, New York, NY, 1992, p. 118.10.1007/978-1-4899-3051-4 ↗
16. Rappaz M., David S.A., Vitek J.M., and Boatner L.A. (1989) Metall. Trans. A, 20A:1125-3810.1007/BF02650147 ↗
17. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 4th ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1998.
18. Kurz W., Giovanola B., and Trivedi R. (1986) Acta Metall., 34:823-3010.1016/0001-6160(86)90056-8 ↗
19. Bobadilla M., Lacaze J., and Lesoult G. (1988) J. Cryst. Growth, 89:531-4410.1016/0022-0248(88)90216-3 ↗
20. Rappaz M. and Boettinger W.J. (1999) Acta Mater., 47:3205-1910.1016/S1359-6454(99)00188-3 ↗
21. A. Schnell: Alstom Power, Baden, Switzerland, unpublished research, 2004.
22. Jansson B., Schalin M., and Sundman B. (1993) J. Phase Equilibria, 14:557-6210.1007/BF02669134 ↗
23. C. Bezençon: Ph.D. Thesis, Institute of Materials, Ecole Polytechnique Fédérale de Lausanne, Lausanne, 2002.
24. Rappaz M. and Gandin C.-A. (1993) Acta Metall. Mater., 41:345-6010.1016/0956-7151(93)90065-Z ↗
25. Gandin C.-A. and Rappaz M. (1994) Acta Mater., 42:2233-4610.1016/0956-7151(94)90302-6 ↗
26. S. Dobler: Institute of Materials, Ecole Polytechnique Fédérale de Lausanne, Lausanne, unpublished research, 1998.
27. Gandin C.-A., Desbiolles J.-L., Rappaz M., and Thévoz P. (1999) Metall. Mater. Trans. A, 30:3153-6510.1007/s11661-999-0226-2 ↗
28. H. Esaka: Ph.D. Thesis, Institute of Materials, Ecole Polytechnique Fédérale de Lausanne, Lausanne, 1986.
29. Wang N., Mokadem S., Rappaz M., and Kurz W. (2004) Acta Mater., 52:3173-8210.1016/j.actamat.2004.03.047 ↗
30. Rappaz M., Jacot A., and Boettinger W.J. (2003) Metall. Mater. Trans. B, 34B:467-7910.1007/s11661-003-0083-3 ↗
31. S. Mokadem: Ph.D. Thesis, Institute of Materials, Ecole Polytechnique Fédérale de Lausanne, Lausanne, 2004.
32. Gandin C.-A. and Rappaz M. (1997) Acta Mater., 45:2187-9510.1016/S1359-6454(96)00303-5 ↗