journal article·2007-06

Strain Rates and Grain Growth in Al 5754 and Al 6061 Friction Stir Spot Welds

A. Gerlich, M. Yamamoto, T.H. North

Publisher page

Abstract

The stir zone temperature and microstructures are compared in friction stir spot welds produced in Al 5754 and Al 6061 alloys. Electron backscattered diffraction was used to determine the relationship between tool rotation speed during welding and final stir zone grain size. Comparison of the grain sizes in rapidly quenched welds with those in air-cooled joints confirmed that grain growth occurred only in Al 6061 spot welds. There was no evidence of abnormal grain growth in the stir zones of Al 6061 welds; the final grain size could be represented using an Arrhenius equation. The strain rates during welding were determined by incorporating the stir zone temperature and average subgrain sizes in quenched spot welds in the Zener–Hollomon relation. When the tool rotation speed increased from 750 to 3000 RPM, the strain rate values ranged from 180 to 497 s−1 in Al 5754 spot welds and from 55 to 395 s−1 in Al 6061 spot welds. It is suggested that a no-slip boundary condition may be appropriate during numerical modeling of Al 5754 and 6061 friction stir spot welding. This is not the case during Al 7075, Al 2024, and Mg-alloy AZ91 spot welding because spontaneous melting facilitates slippage at the tool contact interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.D. Needham, M.G. Murch, P. Templesmith, and C.J. Daws: G.B. Patent Application No. 9125978.8, Dec. 1991
2. U.S. Patent No. 5460317, Oct. 1995
3. R.S. Mishra, Z.Y. Ma: Mater. Sci. Eng. R., 2005, 50:1–7810.1016/j.mser.2005.07.001 ↗
4. W. Woo, H. Choo, D.W. Brown, P.K. Liaw, Z. Feng: Scripta Mater., 2006, 54(11):1859–6410.1016/j.scriptamat.2006.02.019 ↗
5. A.J. Ramirez, M.C. Juhas: Mater. Sci. Forum, 2003, 426–432:2999–300410.4028/www.scientific.net/MSF.426-432.2999 ↗
6. C.G. Andersson, R.E. Andrews, B.G.I. Dance, M.J. Russell, E.J. Olden, and R.M. Sanderson: Proc. 2nd Int. Symp. on Friction Stir Welding, Cambridge, 2000, TWI Ltd., Abington, United Kingdom
7. J.-H. Cho, P.R. Dawson: Metall. Mater. Trans. A, 2006, 37A:1147–6410.1007/s11661-006-1093-8 ↗
8. S.R. Strand, C.D. Sorensen, and T.W. Nelson: Proc. ANTEC 2003 Conf., ASM INTERNATIONAL, Materials Park, OH, 2003, pp. 1078–82
9. C. Schilling and J. Dos Santos: International Patent Publication No. WO 01/36144A1, May 25, 200110.1023/A:1026409930464 ↗
10. A. Gerlich, P. Su, T.H. North: J. Mater. Sci., 2005, 40(24):6473–8110.1007/s10853-005-1568-9 ↗
11. R. Sakano, K. Murakami, K. Yamashita, T. Hyoie, M. Fujimoto, M. Inuzuka, Y. Nagao, and H. Kashiki: Proc. 7th Int. Symp. JWS, 2001, pp. 645–50
12. P.-C. Lin, S.-H. Lin, J. Pan, T. Pan, J.M. Nicholson, and M.A. Garman: SAE Technical Series, 2004–01–1330
13. P. Su, A. Gerlich, and T.H. North: SAE Technical Series, 2005–01–1255
14. H. Jin, S. Saimoto, M. Ball, P.L. Threadgill: Mater. Sci. Technol., 2001, 17:1605–1410.1179/026708301101509674 ↗
15. M.P. Miles, B.J. Decker, T.W. Nelson: Metall. Mater. Trans. A, 2004, 35A:3461–6810.1007/s11661-004-0183-8 ↗
16. S. Lim, S. Kim, C.-G. Lee, S. Kim: Metall. Mater. Trans. A, 2004, 35A:2829–3510.1007/s11661-004-0230-5 ↗
17. L. Liu, H. Nakayama, S. Fukumoto, A. Yamamoto, H. Tsubakino: Mater. Trans., 2004, 45(8):2665–6810.2320/matertrans.45.2665 ↗
18. L. Ke, L. Xing, J.E. Indacochea: Metall. Mater. Trans. B, 2004, 35B:153–6010.1007/s11663-004-0105-6 ↗
19. H. Liu, H. Fujii, M. Maeda, K. Nogi: J. Mater. Sci. Lett., 2003, 22(15):1061–6310.1023/A:1024970421082 ↗
20. G. Liu, L.E. Murr, C-S. Niou, J.C. McClure, F.R. Vega: Scripta Mater., 1997, 37(3):355–6110.1016/S1359-6462(97)00093-6 ↗
21. S.H. Kang, W.H. Bang, J.H. Cho, H.N. Han, K.H. Oh, C.G. Lee, S.-J. Kim: Mater. Sci. Forum, 2005, 495–497:901–06.10.4028/www.scientific.net/MSF.495-497.901 ↗
22. K.N. Krishnan: J. Mater. Sci., 2002, 37:437–8010.1023/A:1013701104029 ↗
23. T.H. North, G.J. Bendzsak, C.B. Smith, and G.H. Luan: Proc. 7th Int. Symp. Kobe, Japan, 2001, JWS, Tokyo, pp. 621–32
24. A. Gerlich, G. Avramovic-Cingara, T.H. North: Metall. Mater. Trans. A, 2006, 37A:2773–8610.1007/BF02586110 ↗
25. A. Gerlich, P. Su, M. Yamamoto, and T.H. North: J. Mater. Sci., in press
26. P. Su, A. Gerlich, T.H. North, G.J. Bendzsak: Sci. Tech. Weld. Joining, 2006, 11(2):163–6910.1179/174329306X84373 ↗
27. P. Su, A. Gerlich, T.H. North, and G.J. Bendzsak: SAE Technical Series, 2006–01–0971
28. A. Gerlich, P. Su, T.H. North: Sci. Tech. Weld. Joining, 2005, 10(6):647–52.10.1179/174329305X48383 ↗
29. A. Gerlich, P. Su, T.H. North, G.J. Bendzsak: Mater. Forum, 2005, 29:290–94
30. A. Gerlich, P. Su, and T.H. North: Magnesium Technology 2005, N.R. Neelameggham, H.I. Kaplan, and B.R. Powell, eds., TMS, Warrendale, PA, pp. 383–88
31. A. Gerlich, G. Avramovic-Cingara, T.H. North: Mater. Sci. Forum, 2006, 519–521:1107–1210.4028/www.scientific.net/MSF.519-521.1107 ↗
32. Aluminum : The Corrosion Resistant Automotive Material, The Aluminum Association, Arlington, Virginia, USA, 2001, p. 20. Publication AT7
33. T. Lyman: Metals Handbook, 8th ed., Vol. 1. ASM INTERNATIONAL, Metals Park, OH, 1961, p. 945
34. R.E. Sanders, S.F. Baumann, and H.C. Stumpf: Treatise on Materials Science and Technology, Academic Press, New York, NY, 1989, vol. 31, p. 6510.1016/B978-0-12-341831-9.50008-5 ↗
35. P.A. Hollinshead: Mater. Sci. Technol., 1992, 8: 5710.1179/026708392790169795 ↗
36. P. Ratchev, B. Verlinden, P. van Houtte: Acta Metall. Mater., 1995, 43(2):621–2910.1016/0956-7151(94)00261-F ↗
37. H.J. McQueen and J.J. Jonas: Treatise on Materials Science Technology, Vol. 6. Academic Press, New York, NY, 1975, pp. 393–49310.1016/B978-0-12-341806-7.50014-3 ↗
38. H.J. McQueen, J.E. Hocket: Metall. Trans. A, 1970, 1:2997–300410.1007/BF03038412 ↗
39. G. Avramovic-Cingara, H.J. McQueen, A. Hopkins, V. Jain, and D. Perovic: in Light Weight Alloys for Aerospace Applications, E.W. Lee, N.J. Kim, and K.V. Jata, eds., TMS-AIME, Warrendale, PA, pp. 333–47
40. G. Avramovic-Cingara, H.J. McQueen: Aluminium, 1994, 70(3–4):214–19
41. G. Avramovic-Cingara, D.D. Perovic, H.J. McQueen: Metall. Mater. Trans. A, 1996, 27A:3478–9010.1007/BF02595440 ↗
42. E. Cerri, E. Evangelista, A. Forcellese, H.J. McQueen: Mater. Sci. Eng., 1995, A197:181–9810.1016/0921-5093(94)09714-3 ↗
43. T. Sheppard: 2nd Int. Conf. on Aluminum Alloys—Their Physical and Mechanical Properties, C.Q. Chen and E.A. Starke, eds., International Academic Publishers, Beijing, 1990, pp. 744–54
44. E. Evangelista, H.J. McQueen, and E. Bonetti: Deformation of Multi-phase and Particle Containing Materials, Risø National Laboratory, Roskilde, Denmark, 1983, pp. 243–50
45. M.R. Clinch, S.J. Harris, W. Hepples, N.J.H. Holroyd, J.V. Wood: Mater. Sci. Forum, 2002, 396–402:521–2610.4028/www.scientific.net/MSF.396-402.521 ↗
46. T. Pettersen, B. Holmedal, E. Nes: Metall. Mater. Trans. A, 2003, 34A:2737–4410.1007/s11661-003-0175-0 ↗
47. W.H. Van Geertruyden, W.Z. Misiolek, P.T. Wang: Mater. Sci. Eng. A, 2006, 419:105–1410.1016/j.msea.2005.12.018 ↗
48. ASM Handbook, vol. 3, Alloy Phase Diagrams, H. Baker, ed., ASM INTERNATIONAL, Materials Park, OH, 1992
49. P. Su, A. Gerlich, T.H. North, G.J. Bendzsak: Metall. Mater. Trans. A, 2007, 38A:584–9510.1007/s11661-006-9067-4 ↗
50. G.J. Bendzsak, T.H. North and C.B. Smith: Proc. 2nd Int. Conf. Friction Stir Welding, Gothenburg, Sweden, 2000, TWI, Abington, United Kingdom, 2000
51. F.P. Bowden, K.E.W. Ridler: Proc. R. Soc. London, Ser. A, 1936, 154(883):640–5610.1098/rspa.1936.0074 ↗
52. F.P. Bowden, P.H. Thomas: Proc. R. Soc. London, Ser. A, 1954, 223(1152):29–4010.1098/rspa.1954.0098 ↗
53. A. Gerlich, P. Su, G.J. Bendzsak, and T.H. North: in Friction Stir Welding and Processing III, K.V. Jata, M.W. Mahoney, and R.S. Mishra, eds., TMS, Warrendale, PA, 2005, pp. 249–32
54. T.F.J. Quinn, W.O. Winer: Wear, 1985, 102:67–8010.1016/0043-1648(85)90092-4 ↗
55. M. Yamamoto, P. Su, A. Gerlich, and T.H. North: SAE Technical Series, 2007–01–1700
56. L.F. Mondolfo: Aluminium Alloys: Structure and Properties, Butterworth and Co., London, 1976, p. 283
57. T. Watanabe, S. Kimura, S. Karashima: Phil. Mag., 1984, A49:845–6410.1080/01418618408236566 ↗
58. T. Watanabe: Mater. Sci. Forum, 1997, 243–245:21–30
59. O.D. Sherby, O.A. Ruano: in Superplastic Forming of Structural Alloys, N.E. Paton C.H. Hamilton, eds., TMS-AIME, New York, NY, 1982, p. 241
60. I. Charit, R.S. Mishra: Mater. Sci. Eng. A, 2003, 359A(1–2):290–9610.1016/S0921-5093(03)00367-8 ↗
61. Z.Y. Ma, R.S. Mishra, M.W. Mahoney: Acta Mater., 2002, 50(17):4419–30
62. P. Cavaliere: J. Mater. Sci., 2006, 41(13):4299–30210.1007/s10853-006-6996-7 ↗
63. P. Cavaliere, A. Squillace: Mater. Characterization, 2005, 55(2):136–4210.1016/j.matchar.2005.04.007 ↗
64. F.J. Humpreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, UK, 1995, p. 283
65. C. Frois, O. Dimitrov: Ann. Chim. Paris, 1966, 1:113
66. T. Shibayanagi, M. Maeda, M. Naka: J. Jpn. Inst. Light Met., 2006, 56(7):347–5310.2464/jilm.56.347 ↗
67. M.M. Attallah, H.G. Salem: Mater. Sci. Eng. A, 2005, 391(1–2):51–5910.1016/j.msea.2004.08.059 ↗
68. K.A.A. Hassan, A.F. Norman, D.A. Price, P.B. Prangnell: Acta Mater., 2003, 51(7):1923–3610.1016/S1359-6454(02)00598-0 ↗
69. R.S. Mishra, R.K. Islamgaliev, T.W. Nelson, Y. Hovansky, M.W. Mahoney: Friction Stir Welding and Processing, TMS, Warrendale, PA, 2001, pp. 205–16
70. Y.S. Sato, M. Urata, H. Kokawa: Metall. Mater. Trans. A, 2002, 33A:625–3510.1007/s11661-002-0124-3 ↗
71. F.J. Frost, M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, UK, 1982
72. Ø. Frigaard, Ø. Grong, J. Hjelen, S. Gulbrandsen-Dahl, and O.T. Midling: Proc. 1st Int. Symp. on Friction Stir Welding, Thousand Oaks, CA, 1999, TWI, Abington, United Kingdom, 1999
73. K.A.A. Hassan, B.P. Wynne, and P.B. Prangnell: Proc. 4th Int. Conf. Friction Stir Welding, Park City, UT, 2003, TWI, Abington, United Kingdom, 2003
74. C.I. Chang, C.J. Lee, J.C. Huang: Scripta Mater., 2004, 51:509–1410.1016/j.scriptamat.2004.05.043 ↗
75. K.V. Jata, S.L. Semiatin: Scripta Mater., 2000, 43(8):743–4910.1016/S1359-6462(00)00480-2 ↗
76. P.A. Colegrove, H.R. Shercliff: Sci. Tech. Weld. Joining, 2006, 11(4):429–4110.1179/174329306X107700 ↗
77. R. Nandan, G.G. Roy, T. DebRoy: Metall. Mater. Trans. A, 2006, 37A:1247–5910.1007/s11661-006-1076-9 ↗
78. P. Su, A. Gerlich, M. Yamamoto, and T.H. North: J. Mater. Sci., 2007, in press