High-temperature deformation properties of austenitic Fe-Mn alloys
Source abstract
Abstract
The influence of the Mn content on the hot deformation properties of austenitic binary Fe-Mn alloys containing 1 to 20 mass pct Mn has been investigated for the first time. The influence of the Mn content on the constitutive equations was determined for the temperature range of 950 °C to 1250 °C and the strain rate range of 0.1 to 2 s−1. The activation energy for hot working increased with increasing Mn content, and dynamic recrystallization was observed for all the Fe-Mn binary alloys. The Mn was found to delay dynamic recrystallization. An increase in the Mn content resulted in an increase of both the peak stress σ p and the corresponding peak strain e p , thus revealing the pronounced influence of Mn on the hot deformation process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. J. Majta, R. Kuziak, M. Pietrzyk, and H. Krzton:J. Mater. Technol., 1996, vol. 60, pp. 581–87.10.1016/0924-0136(96)02390-4 ↗
2. A. Holden, J.D. Bolton, and E.R. Petty:J. Iron Steel Inst., 1971, Sept., pp. 721–28.
3. P.D. Hodgson and R.K. Gibbs:Int. Symp. on Mathematical Modelling of Hot Rolling Steel, August 1990, Quebec, Canada, S. Yue, E.B. Hawbolt, J.J.M. Too, R.G. Stachowiak, eds., CIM, PQ, 1990, pp. 76–82.
4. R. Kuziak:High Nitrogen Steels, SWA ’96, Gliwice-Wisla, Poland, 1996, pp. 34–40.
5. T. Gladman, D. Dulieu, and I.D. McIvor:Microalloying ’75, Union Carbide Corp., New York, NY, 1976, pp. 32–38.
6. P.D. Hodgson and R.K. Gibbs:Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 1329–34.10.2355/isijinternational.32.1329 ↗
7. S.R. Chen, H.A. Davies, and W.M. Rainforth:Acta Mater., 1999, vol. 47 (18), pp. 4555–60.10.1016/S1359-6454(99)00334-1 ↗
8. B. Jiang, X. Qi, S. Yang, W. Zhou, and T.Y. Hsu:Acta Mater., 1998, vol. 6 (2), pp. 501–10.10.1016/S1359-6454(97)00266-8 ↗
9. J. Xuejun, Z. Jihua, and T.Y. Hsu:Mater. Des., 2000, vol. 21, pp. 537–39.10.1016/S0261-3069(00)00006-6 ↗
10. Y.K. Lee and C.S. Choi:Metall. Mater. Trans. A, 2000, vol. 31A, pp. 355–60.10.1007/s11661-000-0271-3 ↗
11. H. Schumann:J. Kristall Tecknik, 1974, vol. 10, pp. 1141–50.10.1002/crat.19740091009 ↗
12. P.Y. Volosevich, V.N. Grindnev, and Y.N. Petrov:Phys. Met. Metallogr., 1976, vol. 42, pp. 126–28.
13. Y.V.R.K. Prasad and T. Seshacharyulu:Int. Mater. Rev., 1998, vol. 43 (6), pp. 243–53.10.1179/imr.1998.43.6.243 ↗
14. A. Gräber and K. Pöhlandt:Steel Res., 1990, vol. 61 (5), pp. 212–19.10.1002/srin.199000334 ↗
15. C.M. Sellars and W.J.McG. Tegart:Int. Metall. Rev., 1972, vol. 17, pp. 1–21.10.1179/095066072790137765 ↗
16. F. Garofalo:Trans. TMS-AIME, 1963, vol. 227, pp. 351–57.
17. S.F. Medina and C.A. Hernandez:Acta Mater., 1996, vol. 44 (1), pp. 137–48.10.1016/1359-6454(95)00151-0 ↗
18. H.J. McQueen and N.D. Ryan:Mater. Sci. Eng., A, 2002, vol. 322, pp. 43–63.10.1016/S0921-5093(01)01117-0 ↗
19. H.J. McQueen, N.D. Ryan, and P. Sakaris:Stainless Steels ’99-Proc., Science and Marketing, Sardinia, Italy, G. DiCaprio, ed., Assoc. Ital. Metal., Milan, Italy, 1999, vol. 3, pp. 265–69.
20. J.M. Cabrera, J.M. Prado, and M.A. Baron:Steel Res., 1999, vol. 70 (2), pp. 59–61.10.1002/srin.199905601 ↗
21. N.D. Ryan and H.J. McQueen:J. Mater. Processing Technol., 1990, vol. 21, pp. 177–99.10.1016/0924-0136(90)90005-F ↗
22. H.J. McQueen, S. Yue, N.D. Ryan, and E. Fry:J. Mater. Processing Technol., 1995, vol. 53, pp. 293–310.10.1016/0924-0136(95)01987-P ↗
23. N.D. Ryan and H.J. McQueen:Stainless Steels ’87, The Institute of Materials, London, 1988, pp. 498–507.
24. J.M. Cabrera, J.J. Jonas, and J.M. Prado:Mater. Sci. Forum, 1998, vols. 284–286, pp. 127–34.10.4028/www.scientific.net/MSF.284-286.127 ↗
25. H.J. McQueen and D.L. Bourell:J. Met., 1987, Sept., pp. 28–35.10.1007/BF03257647 ↗
26. M. El Wahabi, J.M. Cabrera, and J.M. Prado:Mater. Sci. Eng., A, 2003, vol. 343, pp. 116–25.10.1016/S0921-5093(02)00357-X ↗
27. A. Laasraqui and J.J. Jonas:Iron Steel Inst. Jpn. Int., 1991, vol. 31 (1), pp. 95–101.10.2355/isijinternational.31.95 ↗
28. H. Yada:Can. Inst. Metall., Mining Petrol. Bull., 1987, vol. 80, pp. 902–09.