Creep behavior of TiAl alloys with enhanced high-temperature capability
Source abstract
Abstract
For high-temperature applications, creep strength is of major concern, in addition to oxidation and corrosion resistance, and determines the application range of titanium aluminide alloys in competition with other structural materials. Thus, this work was aimed at identifying mechanisms of creep deformation and microstructural degradation and at developing alloying concepts with respect to an enhanced high-temperature capability. The analysis shows that dislocation climb controls deformation in the range of the intended operation temperatures. Further, complex processes of phase transformations, recrystallization, and microstructural coarsening were observed, which contribute to microstructural degradation and limit component life in long-term service. By alloying with high contents of Nb, both room- and high-temperature strength properties can be improved as Nb increases the activation energy of diffusion and increases the propensity for twinning at ambient temperature. For alloys with enhanced high-temperature capability, microalloying with carbon is also of particular use, because carbide precipitates effectively hinder dislocation motion and are thought to increase microstructural stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. D.M. Dimiduk: Mater. Sci. Eng. A, 1999, vol. 263, pp. 281–88.10.1016/S0921-5093(98)01158-7 ↗
2. F.R.N. Nabarro and H.L. deVilliers: The Physics of Creep, Taylor and Francis, London, 1995.
3. H. Oikawa and K. Maruyama: Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 919–30.
4. B.D. Worth, J.W. Jones, and J. Allison: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2947–59.10.1007/BF02669651 ↗
5. R.W. Hayes and P.L. Martin: Acta Metall. Mater., 1995, vol. 43, pp. 2761–72.10.1016/0956-7151(94)00486-2 ↗
6. J. Beddoes, W. Wallace, and L. Zhao: Int. Mater. Rev., 1995, vol. 40, pp. 197–217.10.1179/imr.1995.40.5.197 ↗
7. K. Maruyama, R. Yamamoto, H. Nakakuki, and N. Fujitsuna: Mater. Sci. Eng. A, 1997, vol. 239–240, pp. 419–28.10.1016/S0921-5093(97)00612-6 ↗
8. T.A. Parthasaraty, M.G. Mendiratta, and D.M. Dimiduk: Scripta Mater., 1997, vol. 37, pp. 315–21.10.1016/S1359-6462(97)00099-7 ↗
9. J.N. Wang and T.G. Nieh: Acta Mater., 1998, vol. 46, pp. 1887–1901.10.1016/S1359-6454(97)00434-5 ↗
10. F. Herrouin, D.H. Hu, P. Bowen, and I.P. Jones: Acta Mater., 1998, vol. 46, pp. 4963–72.10.1016/S1359-6454(98)00198-0 ↗
11. W.J. Zhang and S.C. Deevi: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 699–708.
12. R. Kainuma, Y. Fujita, H. Mitsui, I. Ohnuma, and K. Ishida: Intermetallics, 2000, vol. 8, pp. 855–67.10.1016/S0966-9795(00)00015-7 ↗
13. Y.-W. Kim and D.M. Dimiduk: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 531–43.
14. G. Schoöck: Physica Status Solidi, 1965, vol. 8, pp. 499–507.10.1002/pssb.19650080209 ↗
15. U.F. Kocks, A.S. Argon, and M.F. Ashby: Progr. Mater. Sci., 1975, vol. 19, pp. 1–288.10.1016/0079-6425(75)90005-5 ↗
16. F. Appel and R. Wagner: Mater. Sci. Eng. R, 1998, vol. 22, pp. 187–268.10.1016/S0927-796X(97)00018-1 ↗
17. F. Appel, U. Lorenz, M. Oehring, U. Sparka, and R. Wagner: Mater. Sci. Eng. A, 1997, vol. 233, pp. 1–14.10.1016/S0921-5093(97)00043-9 ↗
18. M.F. Bartholomeusz and J.A. Wert: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2161–71.10.1007/BF02652317 ↗
19. F. Appel, U. Sparka, and R. Wagner: Intermetallics, 1999, vol. 7, pp. 325–34.10.1016/S0966-9795(98)00109-5 ↗
20. U. Christoph, F. Appel, and R. Wagner: Mater. Sci. Eng. A, 1997, vols. 239–240, pp. 39–45.10.1016/S0921-5093(97)00558-3 ↗
21. J. Friedel: Les dislocations, Gauthiers-Villars, Paris, 1956.
22. M.A. Morris, T. Lipe, and D.G. Morris: Scripta Mater., 1996, vol. 34, pp. 1337–43.10.1016/1359-6462(95)00670-2 ↗
23. U. Fröbel and F. Appel: Acta Mater., 2002, vol. 50, pp. 3693–707.10.1016/S1359-6454(02)00182-9 ↗
24. Y. Mishin and C. Herzig: Acta. Mater., 2000, vol. 48, pp. 589–623.10.1016/S1359-6454(99)00400-0 ↗
25. F. Appel: Mater. Sci. Eng. A, 2001, vol. 317, pp. 115–27.10.1016/S0921-5093(01)01169-8 ↗
26. J.D.H. Paul, U. Sparka, and F. Appel: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Wittenberger, eds., TMS, Warrendale, PA, 2001, pp. 403–12.
27. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., Krieger Publishing, Malabar, 1992.
28. D. Häussler, U. Messerschmidt, M. Bartsch, F. Appel, and R. Wagner: Mater. Sci. Eng. A, 1997, vol. 233, pp. 15–25.10.1016/S0921-5093(97)00044-0 ↗
29. H. Inui, M.H. Oh, A. Nakamura, and M. Yamaguchi: Phil. Mag. A, 1992, vol. 66, pp. 539–55.10.1080/01418619208201574 ↗
30. F. Appel and U. Christoph: Intermetallics, 1999, vol. 7, pp. 1173–82.10.1016/S0966-9795(99)00030-8 ↗
31. F. Appel: Advances in Twinning, S. Ankem and C.S. Pande, eds., TMS, Warrendale, PA, 1999, pp. 171–86.
32. C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Acta Metall., 1989, vol. 37, pp. 1321–36.10.1016/0001-6160(89)90162-4 ↗
33. A. Menand, A. Huguet, and A. Nérac-Partaix: Acta Mater., 1996, vol. 44, pp. 4729–37.10.1016/S1359-6454(96)00111-5 ↗
34. M. Yamaguchi, H. Inui, and K. Ito: Acta Mater., 2000, vol. 48, pp. 307–22.10.1016/S1359-6454(99)00301-8 ↗
35. F. Appel, M. Oehring, and R. Wagner: Intermetallics, 2000, vol. 8, pp. 1283–312.10.1016/S0966-9795(00)00036-4 ↗
36. S.C. Huang: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 299–307.
37. G. Chen, W.J. Zhang, Y. Wang, J. Wang, Z. Sun, Y. Wu, and L. Zhou: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 319–24.
38. J.D.H. Paul, F. Appel, and R. Wagner: Acta Mater., 1998, vol. 46, pp. 1075–85.10.1016/S1359-6454(97)00332-7 ↗
39. F. Appel, U. Lorenz, J.D.H. Paul, and M. Oehring: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 381–88.
40. C. Woodward, S.A. Kajihara, S.I. Rao, and D.M. Dimiduk: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 49–58.
41. C. Herzig, T. Przeorski, M. Friesel, F. Hisker, and S. Divinski: Intermetallics, 2001, vol. 9, pp. 461–72.10.1016/S0966-9795(01)00025-5 ↗
42. S. Chen, P.A. Beaven, and R. Wagner: Scripta Metall. Mater., 1992, vol. 26, pp. 1205–10.10.1016/0956-716X(92)90564-U ↗
43. W.H. Tian, T. Sano, and M. Nemoto: Phil. Mag. A, 1993, vol. 68, pp. 965–76.10.1080/01418619308219379 ↗
44. W.H. Tian and M. Nemoto: Intermetallics, 1997, vol. 5, pp. 237–44.10.1016/S0966-9795(96)00086-6 ↗
45. P.I. Gouma, M.J. Mills, and Y.-W. Kim: Phil. Mag. Lett., 1998, vol. 78, pp. 59–66.10.1080/095008398178264 ↗
46. P.I. Gouma, K. Subramanian, Y.-W. Kim, and M.J. Mills: Intermetallics, 1998, pp. 689–93.10.1016/S0966-9795(98)00030-2 ↗
47. Y.-W. Kim and D.M. Dimiduk: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 625–32.
48. H. Nickel, N. Zheng, A. Elschner, and W. Quadakkers: Microchim. Acta, 1995, vol. 119, pp. 23–39.10.1007/BF01244851 ↗
49. F. Appel, M. Oehring, J.D.H. Paul, and U. Lorenz: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 63–72.