journal article·2012-12Open access

Microstructural Response During Isothermal and Isobaric Loading of a Precipitation-Strengthened Ni-29.7Ti-20Hf High-Temperature Shape Memory Alloy

O. Benafan, R. D. Noebe, S. A. Padula, R. Vaidyanathan

Abstract

A stable Ni-rich Ni-29.7Ti-20Hf (at. pct) shape memory alloy, with relatively high transformation temperatures, was shown to exhibit promising properties at lower raw material cost when compared to typical NiTi-X (X = Pt, Pd, Au) high-temperature shape memory alloys (HTSMAs). The excellent dimensional stability and high work output for this alloy were attributed to a coherent, nanometer size precipitate phase observed using transmission electron microscopy. To establish an understanding of the role of these precipitates on the microstructure and ensuing stability of the NiTiHf alloy, a detailed study of the micromechanical and microstructural behaviors was performed. In-situ neutron diffraction at stress and temperature was used to obtain quantitative information on phase-specific internal strain, texture, and phase volume fractions during both isothermal and isobaric testing of the alloy. During isothermal testing, the alloy exhibited low isothermal strains due to limited detwinning, consistent with direct measurements of the bulk texture through neutron diffraction. This limited detwinning was attributed to the pinning of twin and variant boundaries by the dispersion of fine precipitates. During isobaric thermal cycling at 400 MPa, the high work output and near-perfect dimensional stability was attributed to the presence of the precipitates that act as homogeneous sources for the nucleation of martensite throughout the material, while providing resistance to irrecoverable processes such as plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. S. Hirose, K. Ikuta, and Y. Umetani: Adv. Robot., 1989, vol. 3, pp. 3–16.10.1163/156855389X00145 ↗
2. C. Mavroidis: Res. Nondestr. Eval., 2002, vol. 14, pp. 1–32.10.1080/09349840209409701 ↗
3. D.J. Hartl, D.C. Lagoudas, F.T. Calkins, and J.H. Mabe: Smart Mater. Struct., 2010, vol. 19, p. 015020.10.1088/0964-1726/19/1/015020 ↗
4. D.J. Hartl, D.C. Lagoudas, F.T. Calkins, and J.H. Mabe: Smart Mater. Struct., 2010, vol. 19, p. 015021.10.1088/0964-1726/19/1/015021 ↗
5. D. Stoeckel: Mater. Des., 1990, vol. 11, pp. 302–07.10.1016/0261-3069(90)90013-A ↗
6. Ravi Vaidyanathan, H.J. Chiel, and R.D. Quinn: Rob. Autom. Syst., 2000, vol. 30, pp. 103–13.10.1016/S0921-8890(99)00067-6 ↗
7. K. Otsuka and C.M. Wayman: Shape Memory Materials, Cambridge University Press, Cambridge, U.K., 1999.
8. G.S. Bigelow, S.A. Padula II, A. Garg, D.J. Gaydosh, and R.D. Noebe: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3065–79.10.1007/s11661-010-0365-5 ↗
9. C. Grossmann, J. Frenzel, V. Sampath, T. Depka, and G. Eggeler: Metall. Mater. Trans. A, 2010, vol. 40A, pp. 2530–44.
10. J. Ma, I. Karaman, and R.D. Noebe: Int. Mater. Rev., 2010, vol. 55, pp. 257–315.10.1179/095066010X12646898728363 ↗
11. G.S. Bigelow, S.A. Padula II, A. Garg, and R.D. Noebe: SPIE, Bellingham, WA, 2007, vol. 6526, pp. 65262B-1–65262B-12.10.1117/12.715252 ↗
12. K.C. Atli, I. Karaman, R.D. Noebe, A. Garg, Y.I. Chumlyakov, and I.V. Kireeva: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2485–97.10.1007/s11661-010-0245-z ↗
13. G.S. Firstov, J. Van Humbeeck, and Y.N. Koval: Mater. Sci. Eng. A, 2004, vol. 378, pp. 2–10.10.1016/j.msea.2003.10.324 ↗
14. K. Otsuka and X. Ren: Intermetallics, 1999, vol. 7, pp. 511–28.10.1016/S0966-9795(98)00070-3 ↗
15. K.C. Atli, I. Karaman, R.D. Noebe, and H.J. Maier: Scripta Mater., 2011, vol. 64, pp. 315–18.10.1016/j.scriptamat.2010.10.022 ↗
16. B. Kockar, K.C. Atli, J. Ma, M. Haouaoui, I. Karaman, M. Nagasako, and R. Kainuma: Acta Mater., 2010, vol. 58, pp. 6411–20.10.1016/j.actamat.2010.08.003 ↗
17. B. Kockar, I. Karaman, J.I. Kim, and Y. Chumlyakov: Scripta Mater., 2006, vol. 54, pp. 2203–08.10.1016/j.scriptamat.2006.02.029 ↗
18. J. Ma, I. Karaman, B. Kockar, H.J. Maier, and Y.I. Chumlyakov: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7628–35.10.1016/j.msea.2011.06.051 ↗
19. S. Shimizu, Y. Xu, E. Okunishi, S. Tanaka, K. Otsuka, and K. Mitose: Mater. Lett., 1998, vol. 34, pp. 23–29.10.1016/S0167-577X(97)00134-1 ↗
20. X.L. Meng, W. Cai, Y.D. Fu, Q.F. Li, J.X. Zhang, and L.C. Zhao: Intermetallics, 2008, vol. 16, pp. 698–705.10.1016/j.intermet.2008.02.005 ↗
21. D.Y. Cong, S. Wang, Y.D. Wang, Y. Ren, L. Zuo, and C. Esling: Mater. Sci. Eng. A, 2008, vol. 473, pp. 213–18.10.1016/j.msea.2007.03.088 ↗
22. E. Panchenko, Y. Chumlyakov, H.J. Maier, E. Timofeeva, and I. Karaman: Intermetallics, 2010, vol. 18, pp. 2458–63.10.1016/j.intermet.2010.09.009 ↗
23. F. Dalle, E. Perrin, P. Vermaut, M. Masse, and R. Portier: Acta Mater., 2002, vol. 50, pp. 3557–65.10.1016/S1359-6454(02)00151-9 ↗
24. P.L. Potapov, A.V. Shelyakov, A.A. Gulyaev, E.L. Svistunov, N.M. Matveeva, and D. Hodgson: Mater. Lett., 1997, vol. 32, pp. 247–50.10.1016/S0167-577X(97)00037-2 ↗
25. P.E. Thoma and J.J. Boehm: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 385–89.10.1016/S0921-5093(99)00303-2 ↗
26. S. Besseghini, E. Villa, and A. Tuissi: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 390–94.10.1016/S0921-5093(99)00304-4 ↗
27. S. Han, W. Zou, S. Jin, Z. Zhang, and D. Yang: Scripta Metall. Mater., 1995, vol. 32, pp. 1441–46.10.1016/0956-716X(95)00185-X ↗
28. X.D. Han, R. Wang, Z. Zhang, and D.Z. Yang: Mater. Lett., 1997, vol. 30, pp. 23–28.10.1016/S0167-577X(96)00165-6 ↗
29. X.D. Han, R. Wang, Z. Zhang, and D.Z. Yang: Acta Mater., 1998, vol. 46, pp. 273–81.10.1016/S1359-6454(97)00187-0 ↗
30. X.D. Han, W.H. Zou, R. Wang, Z. Zhang, and D.Z. Yang: Acta Mater., 1996, vol. 44, pp. 3711–21.10.1016/1359-6454(96)00034-1 ↗
31. X.L. Meng, W. Cai, Y.F. Zheng, Y.B. Rao, and L.C. Zhao: Mater. Lett., 2003, vol. 57, pp. 4206–11.10.1016/S0167-577X(03)00291-X ↗
32. X.L. Meng, W. Cai, Y.F. Zheng, Y.X. Tong, L.C. Zhao, and L.M. Zhou: Mater. Lett., 2002, vol. 55, pp. 111–15.10.1016/S0167-577X(01)00631-0 ↗
33. X.L. Meng, Y.F. Zheng, Z. Wang, and L.C. Zhao: Mater. Lett., 2000, vol. 45, pp. 128–32.10.1016/S0167-577X(00)00091-4 ↗
34. Y.Q. Wang, Y.F. Zheng, W. Cai, and L.C. Zhao: Scripta Mater., 1999, vol. 40, pp. 1327–31.10.1016/S1359-6462(99)00085-8 ↗
35. Y. Tong, F. Chen, B. Tian, L. Li, and Y. Zheng: Mater. Lett., 2009, vol. 63, pp. 1869–71.10.1016/j.matlet.2009.05.069 ↗
36. R. Santamarta, C. Seguí, J. Pons, and E. Cesari: Scripta Mater., 1999, vol. 41, pp. 867–72.10.1016/S1359-6462(99)00221-3 ↗
37. M. Zarinejad, Y. Liu, and T.J. White: Intermetallics, 2008, vol. 16, pp. 876–83.10.1016/j.intermet.2008.04.004 ↗
38. M. Liu, X.M. Zhang, Y.Y. Li, J.Z. Chen, and M.J. Tu: J. Alloys Compd., 2002, vol. 334, pp. 147–53.10.1016/S0925-8388(01)01762-5 ↗
39. C.C. Wojcik: J. Mater. Eng. Perf., 2009, vol. 18, pp. 511–16.10.1007/s11665-009-9357-2 ↗
40. G.S. Bigelow, A. Garg, S.A. Padula II, D.J. Gaydosh, and R.D. Noebe: Scripta Mater., 2011, vol. 64, pp. 725–28.10.1016/j.scriptamat.2010.12.028 ↗
41. ASTM Standard F2082–06, “Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery,” ASTM International, West Conshohocken, PA, 2010, www.astm.org.
42. M.A.M. Bourke, D.C. Dunand, and E. Ustundag: Appl. Phys. A, 2002, vol. 74, pp. s1707–s1709.10.1007/s003390201747 ↗
43. S. Qiu, V. Krishann, S.A. Padula II, R.D. Noebe, B. Clausen, and R. Vaidyanathan: Appl. Phys. Lett., 2009, vol. 95, pp. 141906-1–141906-3.10.1063/1.3245308 ↗
44. C.R. Rathod, B. Clausen, M.A.M. Bourke, and R. Vaidyanathan: Appl. Phys. Lett., 2006, vol. 88, pp. 201919-1–201919-3.10.1063/1.2204650 ↗
45. R. Vaidyanathan, M.A.M. Bourke, and D.C. Dunand: J. Appl. Phys., 1999, vol. 86, pp. 3020–29.10.1063/1.371163 ↗
46. V.B. Krishnan, R.M. Manjeri, B. Clausen, D.W. Brown, and R. Vaidyanathan: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 3–10.10.1016/j.msea.2006.11.176 ↗
47. R.B. Von Dreele: J. Appl. Crystallogr., 1997, vol. 30, pp. 517–25.10.1107/S0021889897005918 ↗
48. M.R. Daymond, M.A.M. Bourke, R.B. Von Dreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82, pp. 1554–62.10.1063/1.365956 ↗
49. A.C. Larson and R.B. Von Dreele: “General Structure Analysis System (GSAS),” Los Alamos National Laboratory Report No. LAUR 86-748, Los Alamos, NM, 2004.
50. R.B. Von Dreele, J.D. Jorgensen, and C.G. Windsor: J. Appl. Crystallogr., 1982, vol. 15, pp. 581–89.10.1107/S0021889882012722 ↗
51. S. Qiu, B. Clausen, S.A. Padula II, R.D. Noebe, D.J. Gaydosh, and R. Vaidyanathan: Acta Mater., 2011, vol. 59, pp. 4660–73.10.1016/j.actamat.2011.04.018 ↗
52. L. Kovarik, F. Yang, R.D. Noebe, and M.J. Mills: Microsc. Microanal., 2009, vol. 15, pp. 1402–03.10.1017/S143192760909730X ↗
53. L. Kovarik, F. Yang, A. Garg, D. Diercks, M. Kaufman, R.D. Noebe, and M.J. Mills: Acta Mater., 2010, vol. 58, pp. 4660–73.10.1016/j.actamat.2010.04.039 ↗
54. T. Sasaki: University of Alabama, Tuscaloosa, AL, personal communication, 2010.
55. S. Banerjee and J. Mukhopadhyay: Phase Transformations—Examples from Titanium and Zirconium Alloys, Pergamon, Oxford, United Kingdom, 2007.
56. M.F.-X. Wagner and W. Windl: Acta Mater., 2008, vol. 56, pp. 6232–45.10.1016/j.actamat.2008.08.043 ↗
57. S.A. Padula II, S. Qiu, D.J. Gaydosh, R.D. Noebe, G.S. Bigelow, A. Garg, and R. Vaidyanathan: “Effect of Upper-Cycle Temperature on the Load-Biased, Strain-Temperature Response of NiTi”, NASA/TM–2011-217408, NASA, Washington, DC, 2011.
58. A. Stebner, S.A. Padula II, R. Noebe, B. Lerch, and D. Quinn: J. Intell. Mater. Syst. Struct., 2009, vol. 20, pp. 2107–26.10.1177/1045389X09347018 ↗
59. D.R. Angst, P.E. Thoma, and M.Y. Kao: J. Phys. IV, 1995, vol. 5, p. C8-747.
60. X.L. Meng, Y.F. Zheng, Z. Wang, and L.C. Zhao: Scripta Mater., 2000, vol. 42, pp. 341–48.10.1016/S1359-6462(99)00347-4 ↗
61. P. Olier, J.C. Brachet, J.L. Bechade, C. Foucher, and G. Guenin: J. Phys. IV, 1995, vol. 5, C8–741.
62. J.A. Monroe, I. Karaman, D.C. Lagoudas, G.S. Bigelow, R.D. Noebe, and S.A. Padula II: Scripta Mater., 2011, vol. 65, pp. 123–26.10.1016/j.scriptamat.2011.03.019 ↗
63. K. Atli: Ph.D. Dissertation, Texas A&M University, College Station, TX, Aug. 2011.