Creep-Fatigue Interactions in a 9 Pct Cr-1 Pct Mo Martensitic Steel: Part II. Microstructural Evolutions
Source abstract
Abstract
A multiscale characterization of the microstructural evolutions taking place in 9 to 12 pct Cr martensitic steels subjected to fatigue and creep-fatigue (CF) loadings is presented. Specimens of a P91 steel subjected to high-temperature cyclic loadings are examined using several experimental techniques. Bright-field transmission electron microscopy (TEM), electron backscattered diffraction (EBSD), and TEM orientation mapping are used to characterize and quantify the microstructural evolutions. A recovery phenomenon consisting of the coarsening of the subgrains and a decrease of the dislocation density is observed. This coarsening is heterogeneous and depends on the strain amplitude and on the applied hold time. The size distribution of subgrains and the dislocation density are measured from bright-field TEM observations. Orientation mapping on scanning electron microscopy (SEM) and TEM show that, even though a correlation between the crystallographic orientation and the recovery phenomenon is highlighted, a complex dependency related to the orientation of neighboring blocks exists. These microstructural observations are consistent with the very fast deterioration of creep properties due to cyclic loadings (reported in the first part of this study).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. G. Eggeler, A. Dlouhy: Z. Metallkd., 2005, vol. 7, pp. 743–4810.3139/146.101096 ↗
2. V. Shankar, M. Valsan, K. Bhanu Sankara Rao, R. Kannan, S.L. Mannan, S.D. Pathak: Mater. Sci. Eng. A, 2006, vol. 437, pp. 413–2210.1016/j.msea.2006.07.146 ↗
3. F. Abe, S. Nakazawa, H. Araki, T. Noda: Metall. Trans. A, 1992, vol. 23A, pp. 469–7710.1007/BF02801164 ↗
4. R. Bonade, P. Spätig, R. Schäublin, M. Victoria: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 16–2110.1016/j.msea.2004.02.074 ↗
5. A. Dronhofer, J. Pesicka, A. Dlouhy, G. Eggeler: Z. Metallkd., 2003, vol. 94, pp. 511–2010.3139/146.030511 ↗
6. J. Pesicka, A. Dronhofer, G. Eggeler: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 176–8010.1016/j.msea.2004.03.080 ↗
7. H. Kitahara, R. Ueji, N. Tsuji, Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–8810.1016/j.actamat.2005.11.001 ↗
8. B.G. Gieseke, C.R. Brinkman, and P.J. Maziasz: in Microstructures and Mechanical Properties of Aging Material, TMS, Warrendale, PA, 1993
9. W.B. Jones, C.R. Hills, D.H. Polonis: Metall. Trans. A, 1991, vol. 22A, p. 104910.1007/BF02661098 ↗
10. K. Sawada, K. Kubo, F. Abe: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 784–8710.1016/S0921-5093(01)00973-X ↗
11. Y. Qin, G. Götz, W. Blum: Mater. Sci. Eng. A, 2003, vol. 341, pp. 211–1510.1016/S0921-5093(02)00215-0 ↗
12. P. Polcik, T. Sailer, W. Blum, S. Straub, J. Bursik, A. Orlova: Mater. Sci. Eng. A, 1999, vol. 260, pp. 252–5910.1016/S0921-5093(98)00887-9 ↗
13. F. Abe: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 565–6910.1016/j.msea.2004.01.057 ↗
14. S.H. Kim, B.J. Song, W.S. Ryu, J.H. Hong: J. Nucl. Mater., 2004, vols. 329–333, pp. 299–30310.1016/j.jnucmat.2004.04.050 ↗
15. J.S. Dubey, H. Chilukuru, J.K. Chakravartty, M. Schwienheer, A. Scholz, W. Blum: Mater. Sci. Eng. A, 2005, vol. 406, pp. 152–5910.1016/j.msea.2005.06.029 ↗
16. M. Kimura, K. Yamaguchi, M. Hayakawa, K. Kobayashi, K. Kanazawa: Int. J. Fatigue, 2006, vol. 28, pp. 300–0810.1016/j.ijfatigue.2005.04.013 ↗
17. A. Orlova, J. Bursik, K. Kucharova, V. Sklenicka: Mater. Sci. Eng. A, 1998, vol. 245, pp. 39–4810.1016/S0921-5093(97)00708-9 ↗
18. E. Cerri, E. Evangelista, S. Spigarelli, P. Bianchi: Mater. Sci. Eng. A, 1998, vol. 245, pp. 285–9210.1016/S0921-5093(97)00717-X ↗
19. P.J. Ennis and A. Czyrska Filemonowicz: OMMI, 2002, vol. 1. www.ommi.co.uk
20. S. Kim, J.R. Weertman: Metall. Trans. A, 1988, vol. 19A, pp. 999–100710.1007/BF02628384 ↗
21. A. Kostka, K. Tak, R. Hellmig, Y. Estrin, G. Eggeler: Acta Mater., 2007, vol. 55, pp. 539–5010.1016/j.actamat.2006.08.046 ↗
22. J.C. Earthman, G. Eggeler, B. Ilschner: Mater. Sci. Eng. A, 1989, vol. 110, pp. 103–1410.1016/0921-5093(89)90161-5 ↗
23. R. Vasina, P. Lukas, L. Kunz, V. Sklenicka: Fatigue Fract. Eng. Mater. Struct., 1995, vol. 18, pp. 27–3510.1111/j.1460-2695.1995.tb00139.x ↗
24. K. Kimura, K. Kushima, F. Abe, K. Suzuki, S. Kumai, and A. Satoh: Parsons 2000 Advanced Materials for 21st Century Turbines and Power Plant, Proc. 5th Int. Charles Parsons Turbine Conf., Maney Publishing, London, 2000, pp. 590–602
25. B. Fournier, M. Sauzay, C. Caës, M. Noblecourt, M. Mottot, L. Allais, I. Tournie, and A. Pineau: Mater. Sci. Eng. A, 2007
26. B. Rezgui, P. Petrequin, and M. Mottot: Proc. ICF 5, Lonnas, France, 1994, Oxford, New York, 1982, pp. 2293–402
27. P. Skelton: Fatigue at High Temperature, Applied Science Publishers, 1982, ch. VII
28. A. Nagesha, M. Valsan, R. Kannan, K. Bhanu Sankara Rao, S.L. Mannan: Int. J. Fatigue, 2002, vol. 24, pp. 1285–9310.1016/S0142-1123(02)00035-X ↗
29. A.F. Armas, C. Petersen, R. Schmitt, M. Avalos, I. Alvarez-Armas: J. Nucl. Mater., 2002, vols. 307–311, pp. 509–1310.1016/S0022-3115(02)01086-3 ↗
30. B. Fournier, M. Sauzay, C. Caës, M. Mottot: Mater. Sci. Eng. A, 2006, vol. 437, pp. 183–9610.1016/j.msea.2006.08.086 ↗
31. B. Fournier, M. Sauzay, C. Caës, M. Noblecourt, M. Mottot, A. Pineau: Mater. Sci. Eng. A, 2006, vol. 437, pp. 197–21110.1016/j.msea.2006.08.087 ↗
32. K. Mathis, E. Rauch: Mater. Sci. Eng. A, 2007, vol. 462, pp. 248–5210.1016/j.msea.2006.01.179 ↗
33. G. Shigesato, E. Rauch: Mater. Sci. Eng. A, 2007, vol. 462, pp. 402–0610.1016/j.msea.2005.12.112 ↗
34. E. Rauch, L. Dupuy: Acta Metall. Mater., 2005, vol. 50, pp. 87–89
35. E. Rauch, M. Vernon: J. Mater. Sci. Eng. Technol., 2005, vol. 36, pp. 552–56
36. L. Dupuy, E. Rauch: Arch. Metallurgy Mater., 2005, vol. 50, pp. 87–99
37. H. Brillet: “Comportement en Fatigue d’un Acier à 9 Pct Cr à 550 °C,” Note Technique CEA/DEN/DMN/SRMA 2003–2525, CEA, Saclay, France, 2003
38. B. Fournier, M. Sauzay, M. Mottot, H. Brillet, I. Monnet, and A. Pineau: Creep & Fracture in High Temperature Components—Design & Life Assessment Issues, Destech Publications Inc., Lancaster, PA, 2005
39. J. Pesicka, R. Kuzel, A. Dronhofer, G. Eggeler: Acta Mater., 2003, vol. 51, pp. 4847–6210.1016/S1359-6454(03)00324-0 ↗
40. G. Eggeler, N. Nilsvang, B. Ilschner: Steel Res., 1987, vol. 2, pp. 87–103
41. Y. de Carlan and L. Guetaz: “Analyse Morphologique et Cristallographique de la Structure Martensitique dans l’acier EUROFER,” Note technique CEA/DEN/DMN/SRMA 00-2400, CEA, Saclay, France, 2000
42. M. Igarashi, S. Muneki, H. Kutsumi, T. Itagaki, N. Fujitsuna, and F. Abe: Proc. 5th Int. Charles Parsons Turbine Conf., Maney Publishing, London, 2000, pp. 334–47
43. P.J. Ennis, A. Zielinska-Lipiec, and A. Czyrska-Filemonowicz: Proc. 5th Int. Charles Parsons Turbine Conf., Maney Publishing, London, 2000, pp. 498–507
44. P.J. Ennis and W.J. Quadakkers: Proc. 5th Int. Charles Parsons Turbine Conf., Maney Publishing, London, 2000, pp. 265–74
45. L. Korcakova: Ph.D. Thesis, Technical University of Denmark, Lyngby, 2002
46. L. Kunz, P. Lukas: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 555–5810.1016/S0921-5093(01)01094-2 ↗
47. U. Kocks, C. Tomé, H. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, MA, 1998
48. G. Kurdjumov, G. Sachs: Z. Phys., 1930, vol. 64, pp. 325–4310.1007/BF01397346 ↗
49. A.-F. Gourgues: Int. Mater. Rev., 2007, vol. 52, pp. 65–12810.1179/174328007X160254 ↗
50. F. Barcelo: “Caractérisation de la Microstructure de l’acier Martensitique EUROFER par EBSD—Influence de la Taille de l’ancien Grain Austénitique,” Note technique CEA/DEN/DMN/SRMA 2003–2525, CEA, Saclay, France, 2003
51. M. Sauzay: Acta Mater., 2007, vol. 55, pp. 1193–120210.1016/j.actamat.2006.09.035 ↗
52. J. Man, K. Obrtlik, C. Blochwitz, J. Polak: Acta Mater., 2002, vol. 50, pp. 3767–8010.1016/S1359-6454(02)00167-2 ↗
53. M. Sauzay, H. Brillet, I. Monnet, M. Mottot, F. Barcelo, B. Fournier, A. Pineau: Mater. Sci. Eng. A, 2005, vols. 400–401, pp. 241–4410.1016/j.msea.2005.02.092 ↗
54. D. Jeulin: Physics and Mechanics of Random Media, Lecture Notes, Ecole des Mines de Paris, Paris, 2002
55. V. Sklenicka, K. Kucharova, M. Svoboda, L. Kloc, J. Bursik, A. Kroupa: Mater. Charact., 2003, vol. 51, pp. 35–4810.1016/j.matchar.2003.09.012 ↗
56. M. Sauzay, B. Fournier, M. Mottot, A. Pineau, and I. Monnet: Mater. Sci. Eng. A, 2008, vols. 483–484, pp. 410–1610.1016/j.msea.2006.12.183 ↗
57. S. Ukai and S. Ohtsuka: J. Nucl. Mater., 2007, vols. 367–370, pp. 185–9010.1016/j.jnucmat.2007.03.148 ↗