On the Tendency of Solutions to Tend Toward Ideal Solutions at High Temperatures
Source abstract
Abstract
The rule of Lupis and Elliott (LE rule) proposed for the first time in 1966 is reformulated in this article as, “Real solid, liquid and gaseous solutions (and pure gases) gradually approach the state of an ideal solution (perfect gas) as temperature increases at any fixed pressure and composition.” This rule is rationalized through the heat expansion of phases and loss of any interaction with increased separation between the atoms. It is shown that the rule is valid only if the standard state is selected properly, i.e., if mixing does not involve any hidden phase changes, such as melting. It is shown that the necessary and sufficient practical conditions to obey the LE rule is the equality of signs of the heat of mixing and excess entropy of mixing and the nonequality of signs of heat of mixing and excess heat capacity of mixing of the same solution. It is shown that these two conditions are fulfilled for most of the experimentally measured high-temperature solutions. The LE rule is compared with the existing laws of thermodynamics. It is shown that the LE rule can be considered as a potential fourth law of materials thermodynamics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Equilibria and Thermodynamics · High-pressure geophysics and materials · Chemical Thermodynamics and Molecular Structure
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. C.H.P. Lupis and J.F. Elliott: Trans. Met. Soc. AIME, 1966, vol. 236, p. 130.
2. C.H. Lupis and J.F. Elliot: Acta Metall., 1967, vol. 15, p. 265.10.1016/0001-6160(67)90202-7 ↗
3. R. Crombie and D.B. Downie: Scripta Metall., 1972, vol. 6, p. 277.10.1016/0036-9748(72)90108-1 ↗
4. O. Kubaschewski: High Temperatures—High Pressures, 1981, vol. 13, p. 435.
5. R.O. Williams: CALPHAD, 1984, vol. 8, p. 135.10.1016/0364-5916(84)90003-8 ↗
6. V.N. Danilin, A.B. Borovskii, and I.T. Sirvalin: Izv. Vuzov Chernaia Metall., 1986, vol. 10, p. 9.
7. T. Tanaka, N.A. Gocken, and Z. Morita: Z. Metallkde., 1990, vol. 81, p. 49.
8. R.O. Williams: CALPHAD, 1991, vol. 15, p. 1.10.1016/0364-5916(91)90021-B ↗
9. T. Tanaka, N.A. Gocken, Z.I. Morita, and T. Iida: Z. Metallkde., 1993, vol. 84, p. 192.
10. T. Tanaka, N.A. Gocken, K.C.H. Kumar, S. Hara, and Z.I. Morita: Z. Metallkde., 1996, vol. 87, p. 779.
11. V.T. Witusiewitz and F. Sommer: J. Alloys Compd., 2000, vol. 312, p. 228.10.1016/S0925-8388(00)01158-0 ↗
12. G. Kaptay: Proc. 34 th International October Conference on Mining and Metallurgy, Eds. Z.S. Markovic and D.T. Zivkovic, University of Belgrade, Technical Faculty of Bor, Yugoslavia, 2002, p. 552.
13. G. Kaptay: CALPHAD, 2004, vol. 28, p. 115.10.1016/j.calphad.2004.08.005 ↗
14. S.L. Chen, S. Daniel, F. Zhang, Y.A. Chang, W.A. Oates, and R. Schmid-Fetzer: J. Phase Equil., 2001, vol. 22, p. 373.10.1361/105497101770332910 ↗
15. R. Arroyave and Z.K. Liu: CALPHAD, 2006, vol. 30, p. 1.10.1016/j.calphad.2005.12.006 ↗
16. H. Ran, Z. Du, C. Guo, and C. Li: J. Alloys Compd., 2008, vol. 464, p. 127.10.1016/j.jallcom.2007.09.105 ↗
17. Y. Gao, C. Guo, C. Li, S. Cui, and Z. Du: J. Alloys Compd., 2009, vol. 479, p. 148.10.1016/j.jallcom.2008.12.059 ↗
18. M. Li, C. Guo, C. Li, and Z. Du: J. Alloys Compd., 2009, vol. 481, pp. 283-90.10.1016/j.jallcom.2009.03.113 ↗
19. X. Yuan, W. Sun, Y. Du, and D. Zhao: CALPHAD, 2009, vol. 33, pp. 673-78.10.1016/j.calphad.2009.08.004 ↗
20. C.Y. Zhan, W. Wang, Z.L. Tang, and Z.R. Nie: Mater. Sci. Forum, 2009, vols. 610-3, pp. 674-80.10.4028/www.scientific.net/MSF.610-613.674 ↗
21. C. Guo, C. Li, and Z. Du: J. Alloys Compd., 2009, vol. 492, p. 122.10.1016/j.jallcom.2009.11.101 ↗
22. C. Niu, M. Liu, C. Li, Z. Du, and C. Guo: CALPHAD, 2010, vol. 34, p. 428.10.1016/j.calphad.2010.07.010 ↗
23. W. Wang, C.P. Guo, C.R. Li, and Z.M. Du: Int. J. Mater. Res., 2010, vol. 101, p. 1339.10.3139/146.110415 ↗
24. S.H. Sheng, R.F. Zhang, and S. Veprek: Acta Mater., 2011, vol. 59, p. 297.10.1016/j.actamat.2010.09.033 ↗
25. R. Schmid-Fetzer, D. Amdersson, P.Y. Chevalier, L. Eleno, O. Fabrichnaya, U.R. Kattner, B. Sundman, C. Wang, A. Watson, L. Zabdyr, and M. Zinkevich: CALPHAD, 2007, vol. 31, p. 38.10.1016/j.calphad.2006.02.007 ↗
26. R. Schmid-Fetzer, A. Janz, J. Grobner, and M. Ohno: Adv. Eng. Mater., 2005, vol. 7, p. 1142.10.1002/adem.200500175 ↗
27. D.V. Malakhov and T. Balakumar: Int. J. Mater. Res., 2006, vol. 97, p. 517.10.3139/146.101267 ↗
28. M. Idbenali, N. Selhauni, L. Bouirden, and C. Servant: J. Alloys Compd., 2008, vol. 456, p. 151.10.1016/j.jallcom.2007.02.036 ↗
29. P. Atkins and J. de Paula: Physical Chemistry, 7th ed., Oxford University Press, Oxford, UK, 2002.
30. O. Kubaschewski and C.B. Alcock: Metallurgical Thermochemistry, 5th ed., Pergamon Press, Oxford, UK, 1979.
31. C.H.P. Lupis: Chemical Thermodynamics of Materials, Elsevier, Amsterdam, The Netherlands, 1983.
32. G.N. Lewis: J. Amer. Chem. Soc., 1908, vol. 30, p. 668.10.1021/ja01947a002 ↗
33. R. Hultgren, L.R. Orr, P.D. Anderson, and K.K. Kelley: Selected Values of Thermodynamic Properties of Metals and Alloys, Wiley, New York, NY, 1963.
34. B. Predel: Phase Equilibria, Crystallographic and Thermodynamic Data of Binary Alloys, Landolt-Börnstein Handbook, Springer-Verlag, Berlin, Germany, 1991–1998.
35. M. Kawakami: Sci. Rep. Tohoku Univ., 1930, vol. 19, p. 521.
36. W. Oelsen, W. Middel, and K.W.I. Mitt: Eisenforsch, Düsseldorf, Germany, 1937, vol. 19, p. 1.
37. U.K. Stolz, I. Arpshofen, and F. Sommer: Z. Metallkde, 1993, vol. 84, p. 552.
38. V. Witusiewicz, U.K. Stolz, I. Arpshofen, and F. Sommer: Z. Metallkde., 1998, vol. 89, p. 704.
39. I. Ansara, A.T. Dinsdale, and M.H. Rand: Thermochemical Database for Light Metal Alloys, COST 507, vols.1-2, EUR18499 EN, Belgium, 1998.
40. F. Sommer: J. Non-Cryst. Sol., 2007, vol. 353, p. 3709.10.1016/j.jnoncrysol.2007.05.149 ↗
41. C. Bergman and K.L. Komarek: CALPHAD, 1985, vol. 9, p. 1.10.1016/0364-5916(85)90026-4 ↗
42. M.A. Turchanin: Powder Metall. Met. Ceram., 2007, vol. 46, p. 565.10.1007/s11106-007-0087-4 ↗
43. J.P. Joule: Phil. Mag., 1841, vol. 19, p. 160.
44. J.R. von Mayer: Ann. Chem. Pharmac., 1842, vol. 43, p. 233.10.1002/jlac.18420420212 ↗
45. R. Clausius: Ann. Phys., 1850, vol. 79, p. 368.10.1002/andp.18501550306 ↗
46. R. Clausius: Ann. Phys., 1850, vol. 79, p. 500.10.1002/andp.18501550403 ↗
47. J.W. Gibbs: Trans. Conn. Acad. Arts Sci., 1875–1878, vol. 3, p. 108.
48. W. Nernst: Nachr. Konig. Geselsch. Wissensch. Göttingen, Mat-Phys. Klasse, 1906, vol. 1, p. 1.
49. M. Planck: Ber. Deutsch. Chem. Geselsch., 1912, vol. 45, p. 5.10.1002/cber.19120450103 ↗
50. G.N. Lewis and G. Gibson: J. Amer. Chem. Soc., 1917, vol. 39, p. 2554.10.1021/ja02257a006 ↗
51. G.L. Hornyak, J. Dutta, H.F. Tibbals, and A.K. Rao: Introduction to Nanoscience, CRC Press, New York, NY, 2008.10.1201/b12835 ↗
52. P. Coffey: Cathedrals of Science, Oxford University Press, Oxford, UK, 2008.