journal article·2001-09

Characterization of the temperature evolution during high-cycle fatigue of the ULTIMET superalloy: Experiment and theoretical modeling

L. Jiang, H. Wang, P. K. Liaw, C. R. Brooks, D. L. Klarstrom

Publisher page

Abstract

High-speed, high-resolution infrared thermography, as a noncontact, full-field, and nondestructive technique, was used to study the temperature variations of a cobalt-based ULTIMET alloy subjected to high-cycle fatigue. During each fatigue cycle, the temperature oscillations, which were due to the thermal-elastic-plastic effects, were observed and related to stress-strain analyses. A constitutive model was developed for predicting the thermal and mechanical responses of the ULTIMET alloy subjected to cyclic deformation. The model was constructed in light of internal-state variables, which were developed to characterize the inelastic strain of the material during cyclic loading. The predicted stress-strain and temperature responses were found to be in good agreement with the experimental results. In addition, the change of temperature during fatigue was employed to reveal the accumulation of fatigue damage, and the measured temperature was utilized as an index for fatigue-life prediction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. S. Suresh: Fatigue of Materials, 2nd ed., Great Britain at the University Press, Cambridge, United Kingdom, 1998.10.1017/CBO9780511806575 ↗
2. A. Puskar and S.A. Golovin: Fatigue in Materials: Cumulative Damage Processes, Elsevier Science Publishers, New York, NY, 1985.
3. H. Wang, L. Jiang, C.R. Brooks, and P.K. Liaw: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1307–10.10.1007/s11661-000-0126-y ↗
4. P.K. Liaw, H. Wang, L. Jiang, B. Yang, J.Y. Huang, R.Q. Kuo, and J.G. Huang: Scripta Mater., 2000, vol. 42, pp. 389–95.10.1016/S1359-6462(99)00358-9 ↗
5. R. Blotny, K. Kaleta, W. Grzebien, and W. Adamczewski: Int. J. Fatigue, 1986, vol. 8 (1), pp. 35–38.10.1016/0142-1123(86)90045-9 ↗
6. B.I. Sandor, D.T. Lohr, and K.C. Schmid: Mater. Eval., 1987, vol. 45 (4), pp. 382–95.
7. R. Attermo and G. Ostberg: Int. J. Fract. Mech., 1971, vol. 7, pp. 122–24.10.1007/BF00236493 ↗
8. D.T. Lohr, N.F. Enke, and B.I. Sandor: Dynamic Failure: Proc. 1987 Society for Experimental Mechanics (SEM) Fall Conf., Savannah, GA, Oct. 25–26, 1987, SEM, Brookfield Center, CT, pp. 139–74.
9. T. Gross: Ph.D. Thesis: Northwestern University, Evanston, IL, 1981.
10. M.P. Luong: Nucl. Eng. Design, 1995, vol. 158, pp. 363–76.10.1016/0029-5493(95)01043-H ↗
11. M.P. Luong: Mech. Mater., 1998, vol. 28, pp. 155–63.10.1016/S0167-6636(97)00047-1 ↗
12. J.A. Charles, F.J. Appl, and J.E. Francis: Trans. ASME, 1978, vol. 100 (4), pp. 200–03.
13. Y. Huang, S.X. Li, S.E. Lin, and C.H. Shih: Mater. Eval., 1984, vol. 42 (7), pp. 1020–24.
14. D. Coleman and M.E. Gurtin: J. Chem. Phys., 1967, vol. 47 (2), pp. 597–613.10.1063/1.1711937 ↗
15. P. Stanley and W.K. Chan: J. Strain Analysis, 1985, vol. 20 (3), pp. 129–37.10.1243/03093247V203129 ↗
16. B.I. Sandor, D.T. Lohr, and K.C. Schmid: Mater. Eval., 1987, vol. 45 (4), pp. 392–95.
17. S. Offermann, J.L. Beaudoin, C. Bissieus, and H. Frick: Exp. Mech., 1997, vol. 37 (4), pp. 409–13.10.1007/BF02317306 ↗
18. G.R. Halford: Ph.D. Thesis, University of Illinois, Urbana, IL, 1966.
19. P.K. Liaw, S.I. Kwun, and M.E. Fine: Metall. Trans. A, 1981, vol. 12A, pp. 49–55.10.1007/BF02648507 ↗
20. M.E. Fine and D.L. Davidson: in Fatigue Mechanisms, Advances in Quantitative Measurement of Physical Damage, ASTM STP 811, J. Lankford, D.L. Davidson, W.L. Morris, and R.P. Wei, eds., ASTM, Philadelphia, PA, 1983, pp. 350–70.10.1520/STP30564S ↗
21. J.L. Chaboche: in Unified Constitutive Laws of Plastic Deformation, A.S. Krausz and K. Krausz, eds., Academic Press, Inc., New York, NY, 1996, pp. 1–68.
22. J. Kratochvil and O.W. Dillon: J. Appl. Phys., 1969, vol. 40 (8), pp. 3207–18.10.1063/1.1658167 ↗
23. O.W. Dillon: J. Mech. Phys. Solids, 1963, vol. 11, pp. 21–23.10.1016/0022-5096(63)90004-8 ↗
24. J. Kratochvil and O.W. Dillon: J. Appl. Phys., 1970, vol. 41 (4), pp. 1470–79.10.1063/1.1659058 ↗
25. E.P. Cernocky and E. Krempl: Thermal Stresses in Severe Environments, Blacksburg, VA, 1980, pp. 47–60.10.1007/978-1-4613-3156-8_5 ↗
26. M.C.M. Liu and E. Krempl: J. Mech. Phys. Solids, 1979, vol. 27, pp. 377–91.10.1016/0022-5096(79)90021-8 ↗
27. E.P. Cernocky and E. Krempl: J. Non-Linear Mech., 1979, vol. 14, pp. 183–203.10.1016/0020-7462(79)90035-0 ↗
28. E.P. Cernocky and E. Krempl: Int. J. Solids Struct., 1980, vol. 16, pp. 723–41.10.1016/0020-7683(80)90014-1 ↗
29. H. Allen and W.E. Haisler: Mech. Struct., 1981, vol. 13, pp. 129–35.
30. H. Allen: Int. J. Solids Struct., 1985, vol. 21 (4), pp. 325–42.10.1016/0020-7683(85)90059-9 ↗
31. E.W. Hart: J. Eng. Mater. Technol., 1976, No. 7, pp. 193–202.10.1115/1.3443368 ↗
32. ULTIMET® alloy, Haynes International, Kokomo, IN, 1994, p. 3.
33. “Conducting Constant Amplitude Axial Fatigue Tests of Metallic Materials,” ASTM Standard E466, ASTM, Philadelphia, PA, 1995.
34. L.M. Brown and S.L. Ogin: Proc. Eshelby Memorial Symp., Sheffield, U.K., April 2–5, 1984., Cambridge University Press, Cambridge, U.K., 1984, pp. 500–28.
35. S.R. Bodner, I. Partom, and Y. Partom: J. Appl. Mech., 1979, vol. 46 (12), pp. 805–10.10.1115/1.3424658 ↗
36. S.R. Bodner and Y. Partom: J. Appl. Mech., 1975, vol. 42 (6), pp. 385–89.10.1115/1.3423586 ↗
37. K.S. Chan, S.R. Bonder, and U.S. Lindholm: J. Eng. Mater. Technol., 1988, vol. 110, pp. 1–8.10.1115/1.3226003 ↗
38. K.S. Chan, U.S. Lindholm, S.R. Bonder, and K.P. Walker: J. Eng. Mater. Technol., 1989, vol. 111, pp. 345–53.10.1115/1.3226478 ↗
39. M.A. Rowley and E.A. Thornton: J. Eng. Mater. Technol., 1996, vol. 118, pp. 19–27.10.1115/1.2805928 ↗
40. K. Li and W.N. Sharpe, Jr.: J. Eng. Mater. Technol., 1996, vol. 118, pp. 88–93.10.1115/1.2805938 ↗
41. A.F. Skipor, S.V. Harren, and J. Botsis: J. Eng. Mater. Technol., 1996, vol. 118, pp. 1–11.10.1115/1.2805929 ↗
42. J. Morrow: Internal Friction, Damping, and Cyclic Plasticity, ASTM STP 378, ASTM, Philadelphia, PA, 1964, pp. 47–87.
43. M.D. Mikhailov and M.N. Özişik: Unified Analysis and Solutions of Heat and Mass Diffusion, John Wiley & Sons, New York, NY, 1984.