Influence of phase transformations on the mechanical properties of high-strength austenitic Fe-Mn-Cr steel
Source abstract
Abstract
The influence of Cr and N additions on the mechanical properties of a Fe-Mn-C steel was investigated. The chemical composition was found to have a pronounced effect on the strain-hardening behavior, due to the strain-induced sequence of the γ → ▓ → α′ martensitic transformations. It was found that Cr and N suppress this transformation sequence. At Cr levels higher than 7.5 mass pct, no α′ martensite was formed, which led to a pronounced improvement of the ductility. The differences in transformation behavior can be attributed to the change in the intrinsic stacking-facult energy (ISFE): in the compositional range studied, Cr and N additions cause an increase of the ISFE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. H. Schumann: Arch. Eisenhüttenwes., 1967, vol. 38 (8), pp. 647–56.10.1002/srin.196704234 ↗
2. J.-L. Putaux and J.-P. Chevalier: Acta Mater., 1996, vol. 44 (4), pp. 1701–16.10.1016/1359-6454(95)00268-5 ↗
3. J.P. Hirth: Metal. Trans. A, 1970, vol. 1A, pp. 2367–74.10.1007/BF03038365 ↗
4. G.B. Olson and M. Cohen: J. Less-Common Met., 1972, vol. 28, pp. 107–18.10.1016/0022-5088(72)90173-7 ↗
5. A.J. Bogers and W.G. Burgers: Acta Metall., 1964, vol. 12, pp. 255–61.10.1016/0001-6160(64)90194-4 ↗
6. H. Schumann: J. Krist. Techn., 1974, vol. 10, pp. 1141–50.10.1002/crat.19740091009 ↗
7. B.W. Oh, S.J. Cho, Y.G. Kim, Y.B. Kim, W.S. Kim, and S.H. Hong: Mater. Sci. Eng. A, 1995, vol. 197, pp. 147–56.10.1016/0921-5093(94)09751-8 ↗
8. S. Allain, J.-P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 158–62.10.1016/j.msea.2004.01.059 ↗
9. Y.-K. Lee and C.-S. Choi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 355–60.10.1007/s11661-000-0271-3 ↗
10. P.Y. Volosevich, V.N. Grindev, and Y.N. Petrov: Phys. Met. Metallogr., 1976, vol. 42, pp. 126–30.
11. R.E. Stoltz and J.B. Vander Sande: Metall. Trans. A, 1980, vol. 11A, pp. 1033–37.10.1007/BF02654717 ↗
12. V.G. Gavriljuk and H. Berns: High Nitrogen Steels Structure, Properties, Manufacture, Applications, Springer-Verlag, Berlin, 1999, pp. 58–62.10.1007/978-3-662-03760-7 ↗
13. C.G. Rhodes and A.W. Thompson: Metall. Trans. A, 1977, vol. 8A, pp. 1901–06.10.1007/BF02646563 ↗
14. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, p. 1345.10.1007/BF02641927 ↗
15. P.C.J. Gallagher: Metall. Trans. 1970, vol. 1, pp. 2429–61.10.1007/BF03038370 ↗
16. B. Jiang, S. Yang, W. Zhou, and T.Y. Hsu: Acta Mater., 1998, vol. 46 (2), pp. 501–10.10.1016/S1359-6454(97)00266-8 ↗
17. V.G. Gavriljuk, H. Berns, C. Escher, N.I. Glavatskaya, A. Sozinov, and Y.N. Petrov: Mater. Sci. Eng. A, 1999, vol. 271, pp. 14–21.10.1016/S0921-5093(99)00272-5 ↗
18. Q.X. Dai, X.N. Cheng, X.M. Luo, and Y.T. Zhao: Mater. Characterization, 2003, vol. 49, pp. 367–71.10.1016/S1044-5803(03)00035-4 ↗
19. I.A. Yabuktsov, A. Ariapour, and D.D. Perovic: Mater. Sci. Forum, 1999, vol. 318–20, pp. 121–30.
20. I.A. Yabuktsov, A. Ariapour, and D.D. Perovic: Acta Mater., 1999, vol. 47 (47), pp. 1271–79.
21. Y. Petrov: Naukova Dumka, Kiev, 1978, p. 262 (in Russian).
22. M. De Meyer, D. Vanderschueren, K. De Blauwe, and B.C. De Cooman: 41st MWSP Conf. Proc., ISS, Warrendale, PA, 1999, vol. 37, pp. 483–91.
23. J.B. Nelson and D.P. Riley: Proc. Phys. Soc., 1945, pp. 160–77.10.1088/0959-5309/57/3/302 ↗
24. G.B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791–95.10.1007/BF02672301 ↗
25. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619–26.10.1007/BF02644427 ↗
26. J.-H. Jun and C.-S. Choi: Mater. Sci. Eng. A, 1998, vol. 257, pp. 353–56.10.1016/S0921-5093(98)00994-0 ↗
27. H. Schumann: Neue Hütte, 1972, vol. 17, pp. 605–09.
28. H.N. Han, C.G. Lee, C.-S. Oh, T.H. Lee, and S.-J. Kim: Acta Mater., 2004, vol. 52, pp. 5203–14.10.1016/j.actamat.2004.07.031 ↗
29. J. Xuejun, Z. Jihua, and T.Y. Hsu: Mater. Design, 2000, vol. 21, pp. 537–39.10.1016/S0261-3069(00)00006-6 ↗
30. J.C. Li, M. Zhao, and Q. Jiang: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 581–84.10.1007/s11661-000-0001-x ↗