journal article·2008-04Open access

In-Situ and Real-Time Analysis of the Formation of Strains and Microstructure Defects during Solidification of Al-3.5 Wt Pct Ni Alloys

G. Reinhart, A. Buffet, H. Nguyen-Thi, B. Billia, H. Jung, N. Mangelinck-Noël, N. Bergeon, T. Schenk, J. Härtwig, J. Baruchel

Abstract

Alloy solidification was investigated in situ and real time by using a unique experimental setup developed at the European Synchrotron Radiation Facility (ESRF) combining both synchrotron X-ray radiography and topography. Although synchrotron X-ray radiography enables the investigation of the solid-liquid interface of metallic alloys, white-beam synchrotron X-ray topography enables the investigation of the formation of strains and defects formation in the growing solid microstructure. In this article, we present results obtained during directional solidification experiments performed with Al-3.5 wt pct Ni samples. First, the initial state after thermal stabilization is characterized. Next, the interface morphological instability and the transition to the columnar growth regime are thoroughly investigated. Topography observation shows that several parts of each dendrite become disoriented while the microstructure is developing. Disorientations are quantified and the aluminum yield stress at the melting point is estimated from the bending of secondary arms. Last, coupled growth of eutectic and dendrites settles with the formation of the eutectic phase. The eutectic grains grow strained and the dendrites concomitantly undergo additional stress.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. E. Blank, W. Kurz, M. Rappaz: Helvetica Physica Acta, 1985, vol. 58, pp. 469–83
2. N. Siredey, M. Boufoussi, S. Denis, J. Lacaze: J. Cryst. Growth, 1993, vol. 13, pp. 132–4610.1016/0022-0248(93)90845-N ↗
3. I. Cantat, K. Kassner, C. Misbah, H. Müller-Krumbhaar: Phys. Rev. E, 1998, vol. 58, p. 602710.1103/PhysRevE.58.6027 ↗
4. B.J. Spencer, P.W. Voorhees, J. Tersoff: Phys. Rev. B, 2001, vol. 64, p. 23531810.1103/PhysRevB.64.235318 ↗
5. J. Forsten, H.M. Miekkoaja: J. Inst. Met., 1971, vol. 99, p. 31
6. M.P. Stephenson and J. Beech: Proc. Int. Conf. on Solidification and Casting of Metals, Sheffield, July 18–21, 1977, pp. 34–38
7. J.N. Koster: J. Mater., 1977, vol. 49, p. 31
8. W.F. Kaukler, F. Rosenberg, P.A. Curreri: Metall. Mater. Trans. A, 1977, vol. 28A, p. 1705
9. R.H. Mathiesen, L. Arnberg, K. Ramsokar, T. Weitkamp, C. Rau, A. Snigirev: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 613–2310.1007/s11663-002-0041-2 ↗
10. H. Yasuda, I. Ohnaka, K. Kawasaki, A. Sugiyama, T. Ohmichi, J. Iwane, K. Umetani: J. Cryst. Growth, 2004, vol. 262, pp. 645–5210.1016/j.jcrysgro.2003.09.052 ↗
11. H. Nguyen Thi, J. Gastaldi, T. Schenk, G. Reinhart, N. Mangelinck-Noël, V. Cristiglio, B. Billia, B. Grushko, J. Hätrwig, H. Klein, J. Baruchel: Phys. Rev. E: Status Phys., 2006, vol. 74, 03160510.1103/PhysRevE.74.031605 ↗
12. B. Li, H.D. Brody, D.R. Black, H.E. Burdette, C. Rau: J. Phys. D: Appl. Phys., 2006, vol. 39, pp. 4450–5610.1088/0022-3727/39/20/023 ↗
13. G. Reinhart, N. Mangelinck-Noel, H. Nguyen-Thi, T. Schenk, J. Gastaldi, B. Billia, P. Pino, J. Hartwig, J. Baruchel: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 384–8810.1016/j.msea.2005.08.197 ↗
14. R.H. Mathiesen, L. Arnberg, P. Bleuet, A. Somogvi: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2515–2410.1007/BF02586224 ↗
15. D.K. Bowen and B.K. Tanner: High-Resolution X-Ray Diffractometry and Topography, Taylor & Francis Ltd., Oxford, United Kingdom, 199810.1201/b12575 ↗
16. J. Chikawa: J. Cryst. Growth, 1974, vols. 24–25, p. 6110.1016/0022-0248(74)90281-4 ↗
17. J. Chikawa, S. Shirai: J. Cryst. Growth, 1977, vol. 39, pp. 328–4010.1016/0022-0248(77)90282-2 ↗
18. G. Grange, C. Jourdan, A.L. Coulet, J. Gastaldi: J. Cryst. Growth, 1985, vol. 72, p.78410.1016/0022-0248(85)90233-7 ↗
19. T. Matsumiya, W. Yamada, T. Ohashi, O. Nittono: Metall. Mater. Trans. A, 1987, vol. 18A, p. 72310.1007/BF02649491 ↗
20. G. Grange, J. Gastaldi, C. Jourdan, B. Billia: J. Cryst. Growth, 1995, vol. 151, pp. 192–9910.1016/0022-0248(95)00030-5 ↗
21. G. Grange, C. Jourdan, J. Gastaldi, B. Billia: Acta Mater., 1997, vol. 45, pp. 2329–3810.1016/S1359-6454(96)00359-X ↗
22. B. Billia, N. Bergeon, H. Ngyuen Thi, H. Jamgotchian, J. Gastaldi, G. Grange: Phys. Rev. Lett., 2004, vol. 93, p. 12610510.1103/PhysRevLett.93.126105 ↗
23. A. Buffet, G. Reinhart, T. Schenk, H. Nguyen-Thi, J. Gastaldi, N. Mangelinck-Noël, H. Jung, J. Härtwig, J. Baruchel, B. Billia: Phys. Status Solidi A, 2007, vol. 204, pp. 2721–2710.1002/pssa.200675670 ↗
24. H. Nguyen Thi, H. Jamgotchian, J. Gastaldi, J. Härtwig, T. Schenk, H. Klein, B. Billia, J. Baruchel, Y. Dabo: J. Phys. D: Appl. Phys., 2003, vol. 36, pp. A83–A8610.1088/0022-3727/36/10A/317 ↗
25. W.R. Pfann: Trans. AIME, 1955, vol. 203, p. 961
26. H. Nguyen Thi, B. Drevet, J.M. Debierre, D. Camel, Y. Dabo, B. Billia: J. Cryst. Growth, 2003, vol. 253, pp. 539–4810.1016/S0022-0248(03)01041-8 ↗
27. W.W. Mullins, R.F. Sekerka, J. Appl. Phys., 1964, vol. 35, p. 44410.1063/1.1713333 ↗
28. J. Pilling, A. Hellawell: Metall. Mater. Trans. A, 1996, vol. 27, p. 22910.1007/BF02647763 ↗
29. M.F. Ashby: Acta Metall., 1972, vol. 20, pp. 887–9710.1016/0001-6160(72)90082-X ↗
30. Z. Yang, C.G. Kang, Z.Q. Hu: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2785–9210.1007/s11661-005-0274-1 ↗
31. D.A. Koss, S.M. Copley: Metall. Trans., 1971, vol. 2, p. 155710.1007/BF02662664 ↗
32. K. Wakashima, T. Kawakubo, S. Umekawa: Metall. Trans. A, 1975, vol. 6A, p. 175510.1007/BF02642304 ↗
33. K. Wakashima, S. Umekawa: Metall. Trans. A, 1976, vol. 7A, p. 1952.10.1007/BF02654994 ↗
34. G. Garmong: Metall. Trans., 1974, vol. 5, pp. 2191–9710.1007/BF02643933 ↗