Selective oxidation and internal nitridation during high-temperature exposure of single-crystalline nickel-base superalloys
Source abstract
Abstract
The process of internal nitridation of the three commercial single-crystalline nickel-base superalloys CMSX-2, CMSX-6, and SRR99 has been studied in air and oxygen-free nitrogen atmospheres at 800 °C to 1100 °C using thermogravimetric techniques supplemented by extensive microstructural examinations. Non-protective oxide formation, particularly cracking and spalling at edges or curved surfaces, enables nitrogen to penetrate into the alloy leading to the precipitation of stable Ti and Al nitrides. The high-temperature corrosion behavior of the superalloys studied is strongly affected by compositional differences between dendritic and interdendritic areas due to segregation resulting in an inhomogeneous internal precipitation zone. Furthermore, the stability of the strengthening γ′ phase (Ni3(Al, Ti, Ta)) in front of the growing internal-nitridation zone was observed to depend clearly on the alloy composition. Therefore, the near-surface area of the alloys can be weakened by γ′ depletion and by embrittlement resulting from internal-nitride precipitation. The results obtained on the nickel-base superalloys are discussed, taking into account the results of a computer-based simulation of internal-corrosion processes. Furthermore, results on Ni-base model alloys of the system Ni-Cr-Al-Ti provided information on the role of the alloy composition. It was found that a higher Cr concentration seems to increase the nitrogen solubility and diffusion in Ni-base alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. F.V. Ver Snyder, R.B. Barlow, B.J. Piearcey, and L.W. Sink: AFS Trans., 1969, vol. 77, pp. 10–14.
2. A.A. Hopgood, A. Nichols, G.D. Smith, and J.W. Martin: Mater. Sci. Technol., 1988, vol. 4, pp. 146–52.10.1179/mst.1998.4.2.146 ↗
3. C.S. Giggins and F.S. Pettit: J. Electrochem. Soc., 1971, vol. 118, pp. 1782–90.10.1149/1.2407837 ↗
4. M. Seiersten and P. Kofstad: Proc. Advanced Materials Research and Developments for Transport, Strasbourg, 1985, Les Editions de Physique, Les Ulis, Cedex, France, 1986, pp. 191–99.
5. C. Wagner: Z. Elektrochemie, 1959, vol. 63, pp. 772–82.
6. G. Bohm and M. Kahlweit: Acta Metall., 1964, vol. 12, pp. 642–48.
7. J. Litz, A. Rahmel, and M. Schorr: Oxid. Met., 1989, vol. 30, pp. 95–105.10.1007/BF00656646 ↗
8. M. Welker, A. Rahmel, and M. Schutze: Metall. Trans. A, 1989, vol. 20A, pp. 1553–60.10.1007/BF02665511 ↗
9. M. Welker, A. Rahmel, and M. Schutze: Metall. Trans. A, 1989, vol. 20A, pp. 1541–51.10.1007/BF02665510 ↗
10. B. Kolsch, A. Rahmel, and M. Schorr: Materialwissenschaftu. Werkstofftechnik, 1989, vol. 20, pp. 369–84.10.1002/mawe.19890201110 ↗
11. M. Gobel, A. Rahmel, and M. Schutze: Oxid. Met., 1994, vol. 41, pp. 231–61.10.1007/BF01080784 ↗
12. G.Y. Lai: Proc. “ASM 1993 Materials Congress—Materials Week ’93, Advanced Materials and Coatings for Combustion Turbines,” V.P. Swaminathan and N.S. Cheruvu, eds., Pittsburgh, PA, 1993, pp. 113–21.
13. G.Y. Lai: Proc. “Materials for Advanced Power Engineering 1994,” D. Coutsouradis, J.H. Davidson, J. Ewald, P. Greenfield, T. Khna, M. Malik, D.B. Meadow, V. Regis, and R.B. Scarlin, eds., Liege, Belgium, 1994, pp. 1263–72.
14. V.P. Swaminathan and J.M. Allen: Mater. Manufact. Processes, 1995, vol. 10, pp. 867–85.10.1080/10426919508935077 ↗
15. J.J. Moran, J.R. Mihalisin, and E.N. Skinner: Corrosion-NACE, 1961, vol. 17, pp. 191–95.10.5006/0010-9312-17.4.115 ↗
16. J.J. Barnes and G.Y. Lai: Proc. “Corrosion and Particle Erosion at High Temperatures,” V. Srinivasan and K. Vedula, eds., TMS, Las Vegas, NV, 1989, pp. 617–34.
17. G.D. Smith and P.J. Bucklin: Proc. “Corrosion ’86” Houston, TX, 1986, paper no. 375, pp. 1–13.
18. G.C. Savva, G.C. Weatherly, and J.S. Kirkaldy: Scripta Metall. 1996, vol. 34, pp. 1087–91.10.1016/1359-6462(95)00621-4 ↗
19. G.C. Savva, G. C. Weatherly, and J. S. Kirkaldy: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1606–17.
20. R.P. Rubly and D.L. Douglass: Proc. “High Temperature Corrosion of Advanced Materials and Protective Coatings,” Y. Saito, B. Onay, and T. Maruyama, eds., Elsevier Science Publishers, Tokyo, 1992, pp. 133–46.10.1016/B978-0-444-88970-6.50021-X ↗
21. I.C. Chen and D.L. Douglass: Oxid. Met., 1992, vol. 38, pp. 189–205.10.1007/BF00666910 ↗
22. K. Tjorko and D.J. Young: Oxid. Met., 1995, vol. 44, pp. 453–74.10.1007/BF01058247 ↗
23. U. Krupp and H.-J. Christ: Oxid. Met., 1999, vol. 52, pp. 277–98.10.1023/A:1018843612011 ↗
24. U. Krupp and H.-J. Christ: Oxid. Met., 1999, vol. 52, pp. 299–320.10.1023/A:1018895628849 ↗
25. J.A. Nesbitt: Oxid. Met., 1995, vol. 44, pp. 309–38.10.1007/BF01046731 ↗
26. D. Blavette, A. Bostel, and J.M. Sarrau: Metall. Trans. A, 1985, vol. 16A, pp. 1703–11.10.1007/BF02670358 ↗
27. H.-J. Christ and H.G. Sockel: High Temp. Technol., 1987, vol. 5, pp. 123–29.10.1080/02619180.1987.11753354 ↗
28. M. Gobel: Ph.D. Thesis, RWTH, Aachen, 1992.
29. D. Goldschmidt: Materialwissenschaftu. Werkstofftechnik, 1994, vol. 15, pp. 311–20.10.1002/mawe.19940250804 ↗
30. U. Krupp: Innere Nitrierung von Nickelbasislegierungen, VDI Fortschritt-Berichte, VDI Verlag, Dusseldorf, 1998.