The Cementite Spheroidization Process in High-Carbon Steels with Different Chromium Contents
Source abstract
Abstract
T he spheroidization annealing, which results in a microstructure of fine spherical cementite particles in a soft ferritic matrix,[ 1 ] is of significant interest for industrial applications. The main purpose of this process is to reduce the hardness of the material and thus provide a good machinability prior to further processing.[ 2 ] Two types of spheroidization annealing are often used. (1) Subcritical spheroidization below the A 1 temperature, which is mainly applied for hypoeutectoid steels. During subcritical annealing of steels with an initial pearlite structure, the cementite lamellae break up into spheroids driven by the reduction in surface energy.[ 3 , 4 ] (2) Intercritical spheroidization above the A 1 temperature, which is mainly applied for hypereutectoid steels in order to spheroidize and partially dissolve the grain boundary cementite. Therefore, the final microstructure of spheroidized hypereutectoid steels usually contains a bimodal distribution of cementite particles,[ 5 , 6 ] where large particles are located mainly on austenite grain boundaries. Numerical simulations of the intercritical spheroidization process in a high-carbon steel have shown that the rate of dissolution of the cementite lamellae also depends on the surrounding conditions.[ 7 ] This research will focus on the intercritical spheroidization annealing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. K.E. Thelning: Steel and Its Heat Treatment, Butterworth and Co., London, 1984, p. 207–1210.1016/B978-0-408-01424-3.50009-1 ↗
2. W. Knorr and H. Vöge: in Steel . A Handbook for Materials Research and Engineering, vol. 1, Verein Deutscher Eisenhüttenleute, ed., Düsseldorf, 1992, pp. 589–603
3. S. Chattopadhyay, C.M. Sellars: Metallography, 1977, vol. 10, pp. 89–10510.1016/0026-0800(77)90044-1 ↗
4. D. Hernandez-Silva, R.D. Morales, J.G. Cabanas-Moreno: ISIJ Int., 1992, vol. 32, pp. 1297–30510.2355/isijinternational.32.1297 ↗
5. J.D. Verhoeven: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2431–3810.1007/s11661-000-0188-x ↗
6. E.L. Brown, G. Krauss: Metall. Trans. A, 1986, vol. 17A, pp. 31–3610.1007/BF02644439 ↗
7. F.J. Vermolen, E. Javierre, C. Vuik, L. Zhao, S. van der Zwaag: Comput. Mater. Sci., 2007, vol. 39, pp. 767–7410.1016/j.commatsci.2006.09.009 ↗
8. E.B. Damm, M.J. Merwin: in Austenite Formation and Decomposition, G.M. Michal, M.D. Novak, eds., TMS, Warrendale, PA, 2003, pp. 397–413
9. W. Hewitt: Heat Treat. Met., 1982, vol. 3, pp. 56–62
10. R.F. Mehl, W.C. Hagel: Prog. Met. Phys., 1956, vol. 6, pp. 74–13410.1016/0502-8205(56)90005-3 ↗
11. T. Oyama, O.D. Sherby, J. Wadsworth, B. Walser: Scripta Metall., 1984, vol. 18, pp. 799–80410.1016/0036-9748(84)90397-1 ↗
12. J.M. Beswick: Metall. Trans. A, 1987, vol. 18A, pp. 1897–190610.1007/BF02647019 ↗
13. A. Borgenstam, A. Engström, L. Höglund, J. Ågren: J. Phase Equilibria, 2000, vol. 21, pp. 269–8010.1361/105497100770340057 ↗
14. A.M. Cree, F.G. Foulkner, A.T. Lyne: Mater. Sci. Technol., 1995, vol. 11, pp. 566–7110.1179/mst.1995.11.6.566 ↗
15. L. Zhao, F.J. Vermolen, A. Wauthier, J. Sietsma: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1841–5010.1007/s11661-006-0127-6 ↗
16. N. Luzginova, L. Zhao, J. Sietsma: Mater. Sci. Eng. A, 2007, vol. 448, pp. 104–1010.1016/j.msea.2006.10.014 ↗
17. J.D. Verhoeven, E.D. Gibson: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1181–8910.1007/s11661-998-0245-4 ↗