Rheological behavior of Al-Cu alloys during solidification constitutive modeling, experimental identification, and numerical study
Source abstract
Abstract
The rheological behavior of a solidifying alloy is modeled by considering the deforming material as a viscoplastic porous medium saturated with liquid. Since the solid grains in the mush do not form a fully cohesive skeleton, an internal variable that represents the partial cohesion of this porous material is introduced. The model parameters are identified using shear and compressive stress states under isothermal conditions on an Al-Cu model alloy. The model is partially validated with non-isothermal conditions and we complete this study with tensile conditions. Such conditions, when applied on the mush, may lead to severe defects in many casting processes. The model has been implemented into a commercial finite-element code to simulate a tensile test. Comparison with experimental data shows that the model is able to reproduce the main features of a solidifying alloy under tension, although fracture is not directly addressed here. We show that two critical solid fractions must be introduced in the model to account for the rheology: the coherency solid fraction at which the mush acquires significant strength and the coalescence solid fraction at which solid grains start to form solid bridges.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A.K. Dahle and L. Arnberg: JOM, 1996, vol. 48, pp. 34–37.10.1007/BF03222888 ↗
2. A.K. Dahle and D.H. StJohn: Acta Mater., 1999, vol. 47, pp. 31–41.10.1016/S1359-6454(98)00342-5 ↗
3. A.K. Dahle, S. Instone, and T. Sumitomo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 105–13.10.1007/s11661-003-0212-z ↗
4. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1361–472.
5. M. M’hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081–93.10.1007/s11661-002-0040-6 ↗
6. S. Le Corre, M. Bellet, F. Bay, and Y. Chastel: in Modelling of Casting, Welding, and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 345–52.
7. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–56.10.1007/s11661-999-0334-z ↗
8. C.L. Martin, O. Ludwig, and M. Suéry: World Congr. on Computational Mechanics V (WCCM V), H.A. Mang; F.G. Rammerstorfer, and J. Eberhardsteiner, eds., Vienna University of Technology, Vienna, 2002 (CD Rom).
9. C.L. Martin, M. Braccini, and M. Suéry: Mater. Sci. Eng. A, 2002, vol. A325, pp. 293–302.
10. O. Ludwig, C.L. Martin, and M. Suéry: Int. Conf. on Aluminium Alloys 8, P.J. Gregson and S.J. Harris, eds., Cambridge, United Kingdom; Mater. Sci. Forum, 2002, vols. 396–402, pp. 265–70.10.4028/www.scientific.net/MSF.396-402.265 ↗
11. O. Ludwig, B. Commet, J.-M. Drezet, C.L. Martin, and M. Suéry: in Modeling of Casting, Welding and Advanced Solidification Processes X, Stefanescu-Waren-Jolly-Krane, eds., TMS, Warrendale, PA, 2003, pp. 183–90.
12. J.-M. Drezet, O. Ludwig, M. M’hamdi, H.G. Fjaer, and C.L. Martin: in Light Metals 2004, T. Tabereaux, eds., TMS, Warrendale, PA, 2004, pp. 655–60.
13. V. Mathier, A. Jacot, and M. Rappaz: Modelling Simul. Mater. Eng., 2004, vol. 12, pp. 479–90.10.1088/0965-0393/12/3/009 ↗
14. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13 (3), pp. 215–35.10.1016/S0749-6419(97)00009-0 ↗
15. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13 (3), pp. 237–59.10.1016/S0749-6419(97)00010-7 ↗
16. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1999, vol. 15, pp. 981–1008.10.1016/S0749-6419(99)00017-0 ↗
17. A. Zavaliangos: Int. J. Mech. Sci., 1998, vol. 40, pp. 1029–41.10.1016/S0020-7403(98)00011-3 ↗
18. A. Zavaliangos and L. Anand: J. Mech. Phys. Solids, 1993, vol. 41, pp. 1087–18.10.1016/0022-5096(93)90056-L ↗
19. O. Ludwig: Ph.D. Thesis, Institut National Polytechnique de Grenoble, Grenoble, 2004.
20. J.C. Michel and P. Suquet: J. Mech. Phys. Solids, 1992, vol. 40, pp. 783–812.10.1016/0022-5096(92)90004-L ↗
21. J.M. Duva and P.D. Crow: Acta Metall., 1992, vol. 40, pp. 31–35.10.1016/0956-7151(92)90196-L ↗
22. C.L. Martin, P. Kumar, and S.B. Brown: Acta Metall. Mater., 1994, vol. 42, pp. 3603–14.10.1016/0956-7151(94)90427-8 ↗
23. C. Sigli, L. Maenner, C. Sztur, and R. Shahani: Proc. Int. Conf. on Aluminum Alloys, T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, eds., JILM, Tokyo, 1998, pp. 87–98.
24. M. Braccini, C.L. Martin, A. Tourabi, Y. Bréchet, and M. Suéry: Mater. Sci. Eng. A, 2002, vol. A337, pp. 1–11.10.1016/S0921-5093(02)00042-4 ↗
25. N. Cristescu: Int. J. Plasticity, 1994, vol. 10, pp. 103–31.10.1016/0749-6419(94)90031-0 ↗
26. W.S. Pellini: Strain Theory of Hot Tearing, Foundry, 1952, pp. 125–99.
27. G.K. Sigworth: AFS Trans., 1996, vol. 106, pp. 1053–59.
28. T.W. Clyne and G.J. Davies: Solidification Casting Met., Metals Society, London, 1979, pp. 275–78.
29. T.W. Clyne and G.J. Davies: Br. Foundryman, 1981, vol. 74, pp. 65–73.
30. B. Magnin, L. Maenner, L. Katgerman, and S. Engler: Mater. Sci. Forum, 1996, vols. 217–222, pp. 1209–14.10.4028/www.scientific.net/MSF.217-222.1209 ↗
31. D.J. Lahaie and M. Bouchard: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 697–705.10.1007/s11663-001-0124-5 ↗
32. D.G. Eskin, Suyitno, and L. Katgerman: Progr. Mater. Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
33. M. Suéry, Y. Bréchet, M. Braccini, and C.L. Martin: Adv. Eng. Mater., 2001, vol. 3, pp. 589–93.10.1002/1527-2648(200108)3:8<589::AID-ADEM589>3.0.CO;2-N ↗
34. M. Rappaz, A. Jacot, and W.J. Boettinger: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 467–79.10.1007/s11661-003-0083-3 ↗
35. M. Rappaz, J.-M. Drezet, P.-D. Grasso, and A. Jacot: in Modeling of Casting, Welding and Advanced Solidification Processes X, Stefanescu-Waren-Jolly-Krane, eds., TMS, Warrendale, PA, 2003, pp. 53–60.
36. F. Decultieux: Ph.D. Thesis, Ecole des Mines de Paris, Paris, 1996.