Characterization of three-dimensional grain structure in polycrystalline iron by serial sectioning
Source abstract
Abstract
The face number, the volume, and the surface area (boundary area) of grains are measured in recrystallized α-iron by serial sectioning coupled with quantitative microstructural analysis on two-dimensional (2-D) sections. The sampling volume contained approximately 1000 grains whose mean grain size was ∼15 µm. The grain volume distribution decreased monotonously with increasing grain volume, whereas the surface area had a peak around one-half of the average. The distribution of the sphere equivalent radii significantly deviated from the log-normal distribution and distributions predicted from mean field theories. The peak and the mean of the face number distribution were f=11 and 12.1, respectively. The linear relationship between the face number of a central grain and the mean face number of surrounding grains, known as the Aboav-Weaire law, was observed in three dimensions. The mean radius of f-faced grains was not proportional to the face number (perimeter law in 3-D), but appeared to be related by a curve convex upward.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. C.H. Desch: J. Inst. Met., 1919, vol. 22, pp. 241–63.
2. F.C. Hull: Mater. Sci. Technol., 1988, vol. 4, pp. 778–85.10.1179/mst.1988.4.9.778 ↗
3. W.M. Williams and C.S. Smith: Trans. AIME, 1952, vol. 194, pp. 755–65.
4. K. Okazaki and H. Conrad: Trans. Jpn. Inst. Met., 1972, vol. 13, pp. 198–204.10.2320/matertrans1960.13.198 ↗
5. G. Liu, H. Yu, and X. Qin: Mater. Sci. Eng., 2002, vol. A326, pp. 276–81.10.1016/S0921-5093(01)01497-6 ↗
6. H. Hu: Can. Metall. Q., 1974, vol. 13, pp. 275–85.10.1179/cmq.1974.13.1.275 ↗
7. M.P. Anderson, D.J. Srolovitz, G.S. Grest, and P.S. Sahni: Acta Metall., 1984, vol. 32, pp. 783–91.10.1016/0001-6160(84)90151-2 ↗
8. K. Fuchizaki and K. Kawasaki: Mater. Sci. Forum, 1996, vols. 204-206, pp. 267–78.10.4028/www.scientific.net/MSF.204-206.267 ↗
9. F. Wakai, N. Enomoto, and H. Ogawa: Acta Mater., 2000, vol. 48, pp. 1297–311.10.1016/S1359-6454(99)00405-X ↗
10. S. Sista and T. DebRoy: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 1195–1201.10.1007/s11663-001-0107-6 ↗
11. M.A. Mangan, P.D. Lauren, and G.J. Shiflet: J. Microsc., 1997, vol. 188, pp. 36–41.10.1046/j.1365-2818.1997.2380799.x ↗
12. M.V. Kral and G. Spanos: Acta Mater., 1999, vol. 47, pp. 711–24.10.1016/S1359-6454(98)00321-8 ↗
13. W.H. Beyer: Standard Mathematical Tables, 25th ed., CRC Press, West Palm Beach, Fla, 1978, p. 147.
14. N. Rivier: Phil. Mag. B, 1985, vol. B52, pp. 795–819.10.1080/13642818508240637 ↗
15. S.F. Edwards and K.D. Pithia: Physica A, 1994, vol. 205, pp. 577–84.10.1016/0378-4371(94)90222-4 ↗
16. E.E. Underwood: Quantitative Stereology, Addison-Wesley, New York, NY, 1970, pp. 105–45.
17. H.V. Atkinson: Acta Metall., 1988, vol. 36, pp. 469–91.10.1016/0001-6160(88)90079-X ↗
18. P. Feltham: Acta Metall., 1957, vol. 5, pp. 97–105.10.1016/0001-6160(57)90136-0 ↗
19. S.K. Kurz and F.M.A. Carpay: J. Appl. Phys., 1980, vol. 51, pp. 5725–44.10.1063/1.327580 ↗
20. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
21. N.P. Louat: Acta Metall., 1974, vol. 22, pp. 721–24.10.1016/0001-6160(74)90081-9 ↗
22. D.T. Wu: MRS Symp. Proc., 1994, vol. 343, pp. 61–64.10.1557/PROC-343-61 ↗
23. F.R. Rhines and B.R. Patterson: Metall. Trans. A, 1982, vol. 13A, pp. 985–93.10.1007/BF02643395 ↗