Dendritic Growth Morphologies in Al-Zn Alloys—Part II: Phase-Field Computations
Source abstract
Abstract
In Part I of this article, the role of the Zn content in the development of solidification microstructures in Al-Zn alloys was investigated experimentally using X-ray tomographic microscopy. The transition region between $${\langle{100}\rangle}$$ dendrites found at low Zn content and $${\langle{110}\rangle}$$ dendrites found at high Zn content was characterized by textured seaweed-type structures. This Dendrite Orientation Transition (DOT) was explained by the effect of the Zn content on the weak anisotropy of the solid–liquid interfacial energy of Al. In order to further support this interpretation and to elucidate the growth mechanisms of the complex structures that form in the DOT region, a detailed phase-field study exploring anisotropy parameters’ space is presented in this paper. For equiaxed growth, our results essentially recapitulate those of Haxhimali et al.[1] in simulations for pure materials. We find distinct regions of the parameter space associated with $${\langle{100}\rangle}$$ and $${\langle{110}\rangle}$$ dendrites, separated by a region where hyperbranched dendrites are observed. In simulations of directional solidification, we find similar behavior at the extrema, but in this case, the anisotropy parameters corresponding to the hyperbranched region produce textured seaweeds. As noted in the experimental work reported in Part I, these structures are actually dendrites that prefer to grow misaligned with respect to the thermal gradient direction. We also show that in this region, the dendrites grow with a blunted tip that oscillates and splits, resulting in an oriented trunk that continuously emits side branches in other directions. We conclude by making a correlation between the alloy composition and surface energy anisotropy parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Haxhimali T., Karma A., Gonzales F., Rappaz M. (2006) . Nat. Mater. 5, pp. 660–64.10.1038/nmat1693 ↗
2. J. Friedli, J. Fife, P. Di Napoli, and M. Rappaz: Metall. Mater. Trans. A, 2013. DOI: 10.1007/s11661-013-1912-7.10.1007/s11661-013-1912-7 ↗
3. Gonzales F., Rappaz M. (2006) Metall. Mater. Trans. A 37A:2797––806.10.1007/BF02586112 ↗
4. Gonzales F., Rappaz M. (2008) Metall. Mater. Trans. A 39A:2148–60.10.1007/s11661-008-9546-x ↗
5. Mullins W.W., Sekerka R.F. (1963) J. Appl. Phys. 34:323–29.10.1063/1.1702607 ↗
6. Chan S.K., Reimer H.H., Kahlweit M. (1976) J. Cryst. Growth 32:303–15.10.1016/0022-0248(76)90111-1 ↗
7. Fehlner W.R., Vosko S.H. (1976) Can. J. Phys. 54:2159–69.10.1139/p76-256 ↗
8. Napolitano R.E., Liu S. (2004) Phys. Rev. B 70:1–11.10.1103/PhysRevB.70.214103 ↗
9. Karma A., Rappel W.J. (1998) Phys. Rev. E 57:4323–49.10.1103/PhysRevE.57.4323 ↗
10. C. Herring: in The Physics of Powder Metallurgy, W. Kingston, ed., McGraw-Hill, New York, 1951, pp. 143–77.
11. Du D., Zhang H., Srolovitz D. (2007) Acta Mater. 55:467–71.10.1016/j.actamat.2006.08.038 ↗
12. J. Friedli: Ph.D. Thesis, EPFL, 2011.
13. Hoffman D., Cahn J. (1972) Surf. Sci. 31:368–88.10.1016/0039-6028(72)90268-3 ↗
14. A. Karma: Phys. Rev. Lett., 2001, vol. 87, pp. 045501-1–045501-4.10.1103/PhysRevLett.87.115701 ↗
15. B. Echebarria, R. Folch, A. Karma, and M. Plapp: Phys. Rev. E, 2004, vol. 70, pp. 061604-1–061604-22.10.1103/PhysRevE.70.061604 ↗
16. Du Y., Chang Y., Huang B., Gong W., Jin Z., Xu H., Yuan Z., Liu Y., He Y., Xie F.Y. (2003) Mater. Sci. Eng. A Struct. 363:140–51.10.1016/S0921-5093(03)00624-5 ↗
17. Mey S., Effenberg G. (1986) Z. Metallkd. 77:449–53.
18. Morris J., Mendelev M., Srolovitz D. (2007) J. Non-Cryst. Solids 353:3565–69.10.1016/j.jnoncrysol.2007.05.116 ↗
19. J. Valencia and P. Quested: in ASM Handbook, vol. 22B, D. Furrer and S. Semiatin, eds., ASM International, Materials Park, OH, 2010, pp. 18–32.
20. C. Smithells and E. Brandes: in Smithells Metals Reference Book, 6th ed., E. Brandes, ed., Butterworths, London, 1983, p. 14–1.
21. J.H. Jeong, N. Goldenfeld, and J. Dantzig: Phys. Rev. E, 2001, vol. 64, pp. 041602-1–041602-14.10.1103/PhysRevE.64.041602 ↗
22. Jeong J.H., Dantzig J., Goldenfeld N. (2003) Metall. Mater. Trans. A 34A:459–66.10.1007/s11661-003-0082-4 ↗
23. Burman E., Jacot A., Picasso M. (2004) J. Comput. Phys. 195:153–74.10.1016/j.jcp.2003.09.021 ↗
24. Provatas N., Greenwood M., Athreya B., Goldenfeld N., Dantzig J. (2005) Int. J. Mod. Phys. B 19:4525–65.10.1142/S0217979205032917 ↗
25. Athreya B., Dantzig J., Liu S., Trivedi R. (2006) Philos. Mag. 86:3739–56.10.1080/14786430500157060 ↗
26. Narski J, Picasso M (2007) Comput. Methods Appl. Mech. Eng. 196:3562–76.10.1016/j.cma.2006.10.033 ↗
27. T. Haxhimali: Ph.D. Thesis, Northeastern University, 2006.
28. Asta M., Beckermann C., Karma A., Kurz W., Napolitano R., Plapp M., Purdy G., Rappaz M., Trivedi R. (2009) Acta Mater. 57:941–71.10.1016/j.actamat.2008.10.020 ↗
29. Napolitano R.E., Liu S., Trivedi R. (2002) Interface Sci. 10:217–32.10.1023/A:1015884415896 ↗
30. Ercolessi F., Adams J. (1994) Europhys. Lett. 26:583–88.10.1209/0295-5075/26/8/005 ↗
31. J. Dantzig and M. Rappaz: Solidification, 1st ed., EPFL Press, Lausanne, 2009.10.1201/9781439808030 ↗
32. Akamatsu S., Faivre G., Ihle T. (1995) Phys. Rev. E 51:4751–80.10.1103/PhysRevE.51.4751 ↗