Coupled-solute drag effects on ferrite formation in Fe-C-X systems
Source abstract
Abstract
The influence of X upon proeutectoid ferrite/microstructurally defined bainite formation in Fe-C-X alloys, where X is Co, Cr, Cu, Mn, Mo, Ni, Ni, Si, or V, is examined in terms of the competing influences of the coupled-solute drag effect (C-SDE) and the shifting in the paraequilibrium Ae3 curve. The relative strength of the C-SDE was estimated primarily in terms of the influence of X upon the Wagner interaction parameter for C-X interaction in austenite, e 12 γ . Changes in the W s (Widmanstatten-start temperature) with X additions at a constant pct C are ascribed almost entirely to shifts in the paraequilibrium Ae3. Influence of X upon the steady-state nucleation rate of ferrite allotriomorphs at austenite grain faces is largely explicable upon the same basis, though additional effects appear to be exerted by Mn and Ni upon relative values of the interfacial energies involved in the nucleation process. Development of a bay in the TTT curve for initiation of ferrite formation occurs more readily with increasingly negative e 12 γ and increasing carbon concentration. When e 12 γ > 1, considerably larger X and C concentrations are required to form what may sometimes be described as a “virtual bay,” only the lower portion of which is experimentally detectable. As e 12 γ becomes increasingly negative (but not as much when e 12 γ is increasingly positive), the influence of paraequilibrium Ae3 shifts is much diminished. Widmanstatten sideplate formation is also increasingly suppressed and replaced by grain boundary and twin boundary allotriomorphs at temperatures between the upper nose and the bay of the ferrite-start TTT curve. Changes in carbide precipitation patterns and replacement of (Fe, X)3C by alloy carbides directly follow from these alterations in ferrite morphology. When e 12 γ is sufficiently negative, incomplete transformation occurs below the bay temperature. Much higher proportions of X and C are required to produce this effect when e 12 γ > 1. Still more negative values of e 12 γ may be required to develop the degenerate ferrite microstructures below the bay that result from increasing C-SDE restrictions on growth and the consequent frequently repeated sympathetic nucleation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. K.R. Kinsman and H.I. Aaronson: Transformation and Hardenability in Steels, Ann Climax Molybdenum Co., Arbor, MI, 1967, p. 39.
2. H.I. Aaronson: The Mechanism of Phase Transformations in Crystalline Solids, Institute of Metals, London, 1969, p. 270.
3. J.R. Bradley and H.I. Aaronson: Metall. Trans. A, 1981, vol. 12A, p. 1729.10.1007/BF02643755 ↗
4. P.G. Boswell, K.R. Kinsman, G.J. Shiflet, and H.I. Aaronson: Mechanical Properties and Phase Transformations in Engineering Materials, TMS, Warrendale, PA, 1986, p. 445.
5. G.R. Purdy and Y.M. Brechet: Acta Mater, 1995, vol. 43, p. 3763.10.1016/0956-7151(95)90160-4 ↗
6. H.A. Fletcher, A.J. Garratt-Reed, H.I. Aaronson, G.R. Purdy, W.T. Reynolds, Jr. and G.D.W. Smith: Scripta Mater., 2001, vol. 45, p. 561.10.1016/S1359-6462(01)01060-0 ↗
7. M. Enomoto: Acta Mater., 1999, vol. 47, p. 3533.10.1016/S1359-6454(99)00232-3 ↗
8. E.S. Humphreys, H.A. Fletcher, J.D. Hutchins, A.J. Garratt-Reed, W.T. Reynolds, Jr., H.I. Aaronson, G.R. Purdy, and G.D.W. Smith: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1223–35.10.1007/s11661-004-0296-0 ↗
9. C.A. Dubé, H.I. Aaronson, and R.F. Mehl: Rev. Met., 1988, vol. 55, p. 201.10.1051/metal/195855030201 ↗
10. H.I. Aaronson: Decomposition of Austenite by Diffusional Processes, Interscience Publishers, New York, NY, 1962, p. 387.
11. P.J. Clemm and J.C. Fisher: Acta Metall., 1955, vol. 3, p. 70.10.1016/0001-6160(55)90014-6 ↗
12. J.W. Cahn: Acta Metall., 1956, vol. 4, p. 449.10.1016/0001-6160(56)90041-4 ↗
13. Weiming Huang and Mats Hillert: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 480–83.10.1007/BF02648428 ↗
14. W.F. Lange III, M. Enomoto, and H.I. Aaronson: Metall. Trans. A, 1979, vol. 10A, pp. 1951–52.10.1007/BF02811745 ↗
15. W.F. Lange III, M. Enomoto, and H.I. Aaronson: Metall. Mater. Trans. A, 1988, vol. 19A, pp. 427–40.10.1007/BF02649256 ↗
16. J.R. Bradley, J.M. Rigsbee, and H.I. Aaronson: Metall. Trans. A, 1977, vol. 8A, pp. 323–33.10.1007/BF02661647 ↗
17. G. Spanos and Milo V. Kral: Proc. Int. Conf. on Solid-Solid Phase Transformations ’99, M. Koiwa, K. Otsuka, and T. Miyazaki, eds., Japan Institute of Metals, Sendai, Japan, 1999, p. 1469.
18. C.S. Smith: Trans. ASM, 1953, vol. 45, p. 533.
19. T. Furuhara and H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, p. 2887.10.1016/0956-7151(91)90105-A ↗
20. P.D. Frost, W.M. Parris, L.L. Hirsch, J.R. Doig, and C.M. Schwartz: Trans. ASM, 1954, vol. 46, p. 231.
21. T. Furuhara, J.M. Howe, and H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, p. 2873.10.1016/0956-7151(91)90104-9 ↗
22. T. Furuhara and T. Maki: Mater. Trans. JIM, 1992, vol. 33, p. 734.10.2320/matertrans1989.33.734 ↗
23. J.R. Bradley and H.I. Aaronson: Metall. Trans. A, 1977, vol. 8A, pp. 317–22.10.1007/BF02661646 ↗
24. H.I. Aaronson: J. Microsc., 1974, vol. 102, p. 275.10.1111/j.1365-2818.1974.tb04640.x ↗
25. M. Enomoto and H.I. Aaronson: Scripta Metall., 1989, vol. 23, p. 1983.10.1016/0036-9748(89)90495-X ↗
26. C. Atkinson, K.R. Kinsman, H.B. Aaron, and H.I. Aaronson: Metall. Trans., 1973, vol. 4, p. 783–92.10.1007/BF02643088 ↗
27. H.I. Aaronson, C. Laird, and K.R. Kinsman: Phase Transformations, ASM, Materials Park, OH, 1970, p. 313.
28. R.D. Townsend and J.S. Kirkaldy: Trans. ASM, 1968, vol. 62, p. 605.
29. P.R. Krahe, K.R. Kinsman, and H.I. Aaronson: Acta Metall., 1972, vol. 20, p. 1109.10.1016/0001-6160(72)90175-7 ↗
30. H.I. Aaronson, G. Spanos, R.A. Masamura, R.G. Vardiman, D.W. Moon, E.S.K. Menon, and M.G. Hall: Mater. Sci. Eng., 1995, vol. B32, p. 107.10.1016/0921-5107(95)80022-0 ↗
31. G. Spanos and M.G. Hall: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1517–32.
32. T. Furuhara, T. Makino, H. Watanabe, and T. Maki: Proc. Int. Conf. on Solid → Solid Phase Transformations, TMS, Warrendale, PA, 1994, p. 237.
33. R.F. Mehl, C.S. Barrett, and D.W. Smith: Trans. AIME, 1933, vol. 105, p. 215.
34. R.F. Hehemann: Phase Transformations, ASM, Materials Park, OH, 1970, p. 397.
35. E.P. Simonen, H.I. Aaronson, and R. Trivedi: Metall. Trans., 1973, vol. 4, pp. 1239–45.10.1007/BF02644517 ↗
36. R. Trivedi: Metall. Trans., 1970, vol. 1, pp. 921–27.10.1007/BF02811774 ↗
37. R.H. Goodenow, S. Matas, and R.F. Hehemann: Trans. AIME, 1965, vol. 233, p. 1777.
38. G. Kurdjumow and G. Sachs: Z. Phys., 1930, vol. 64, p. 325.10.1007/BF01397346 ↗
39. M.G. Hall, H.I. Aaronson, and K.R. Kinsman: Surface Sci., 1972, vol. 31, p. 257.10.1016/0039-6028(72)90264-6 ↗
40. K.C. Russell, M.G. Hall, K.R. Kinsman, and H.I. Aaronson: Metall. Trans., 1974, vol. 5, pp. 1503–05.10.1007/BF02646638 ↗
41. M.G. Hall, T. Furuhara, H.I. Aaronson, and J.P. Hirth: Acta Mater., 2001, vol. 49, p. 3487.10.1016/S1359-6454(01)00227-0 ↗
42. J.P. Hirth and R.C. Pond: Acta Metall. Mater., 1996, vol. 44, p. 4749.10.1016/S1359-6454(96)00132-2 ↗
43. J.M. Rigsbee and H.I. Aaronson: Acta Metall., 1979, vol. 27, p. 365.10.1016/0001-6160(79)90029-4 ↗
44. J.M. Rigsbee and H.I. Aaronson: Acta Metall., 1970, vol. 27, p. 351.10.1016/0001-6160(79)90028-2 ↗
45. Chengji Li and G.R. Purdy: Proc. 4th Int. Congr. on Heat Treatment of Materials, Berlin, 1985, p. 32.
46. C. Li, V. Perovic, and G.R. Purdy: Phase Transformations ’87, Institute of Metals, London, 1988, p. 326.
47. G.R. Purdy: Scripta Mater., 2002, vol. 47, p. 181.10.1016/S1359-6462(02)00126-4 ↗
48. T. Moritani, N. Miyajima, T. Furuhara, and T. Maki: Scripta Mater., 2002, vol. 47, p. 193.10.1016/S1359-6462(02)00128-8 ↗
49. J.W. Christian and K.M. Knowles: Proc. Int. Conf. on Solid → Solid Phase Transformations, TMS, Warrendale, OH, 1982, p. 1185.
50. K.R. Kinsman, E. Eichen, and H.I. Aaronson: Metall. Trans. A, 1975, vol. 6A, pp. 303–17.10.1007/BF02667284 ↗
51. Hong-Sheng Fang, Jia-Jun Wang, and Yan-Kang Zheng: Metall. Mater. Trans. A, 1994, vol. 25A, p. 2001.10.1007/BF02649048 ↗
52. K.M. Wu, M. Kagayama, and M. Enomoto: Mater. Sci. Eng., 2002, vol. A343, p. 143.
53. R.E. Hackenberg, D.P. Nordstrom, and G.J. Shiflet: Scripta Mater., 2002, vol. 47, p. 357.10.1016/S1359-6462(02)00167-7 ↗
54. M. Hillert: The Mechanism of Phase Transformations in Crystalline Solids, Institute of Metals, London. 1969, p. 231.
55. W.T. Reynolds, Jr., F.Z. Li, C.K. Shui, and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1433–63.10.1007/BF02672561 ↗
56. H. Tsubakino and H.I. Aaronson: Metall. Trans. A, 1987, vol. 18A, pp. 2047–60.10.1007/BF02647077 ↗
57. G.J. Shiflet and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1413–32.10.1007/BF02672560 ↗
58. J.W. Cahn: Acta Metall., 1962, vol. 10, p. 789.10.1016/0001-6160(62)90092-5 ↗
59. H.A. Fletcher, A.J. Garratt-Reed, H.I. Aaronson, G.R. Purdy, W.T. Reynolds, Jr. and G.D.W. Smith: Scripta Mater., 2001, vol. 45, p. 561.10.1016/S1359-6462(01)01060-0 ↗
60. M. Hillert and B. Sundman: Acta Metall., 1975, vol. 24, 731.10.1016/0001-6160(76)90108-5 ↗
61. K. Oi, C. Lux and G.R. Purdy: Acta Mater., 2000, vol. 48, p. 2147.10.1016/S1359-6454(00)00041-0 ↗
62. C. Zener: J. Appl. Phys., 1949, vol. 20, p. 950.10.1063/1.1698258 ↗
63. J.S. Kirkaldy, B.A. Thomson, and H.A. Baganis: Hardenability Concepts with Applications to Steel, TMS-AIME, New York, NY, 1978, p. 82.
64. M. Hansen: Constitution of Binary Alloys, 2nd ed., McGraw-Hill, New York, NY, 1958, p. 1265.
65. H.I. Aaronson, P.G. Boswell, and K.R. Kinsman: Mechanical Properties and Phase Transformations in Engineering Materials—Earl R. Parker Symp. on Structure Property Relationships, TMS-AIME, Warrendale, PA, 1986, p. 467.
66. T. Lyman and A.R. Troiano: Trans. ASM, 1946, vol. 37, p. 402.
67. H.I. Aaronson and H.A. Domian: Trans. TMS-AIME, 1966, vol. 236, p. 781.
68. K.R. Kinsman and H.I. Aaronson: Metall. Trans., 1973, vol. 4, pp. 959–67.10.1007/BF02645596 ↗
69. M. Enomoto and H.I. Aaronson: Metall. Mater. Trans. A, 1986, vol. 17A,pp. pp. 1385–97.10.1007/BF02650120 ↗
70. M. Enomoto, W.F. Lange III, and H.I. Aaronson: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 1399–407.10.1007/BF02650121 ↗
71. M. Enomoto, C.L. White, and H.I. Aaronson: Metall. Mater. Trans. A, 1988, vol. 19A, pp. 1807–18.10.1007/BF02645149 ↗
72. M. Guttmann and D. McLean: Interfacial Segregation, ASM, Metals Park, OH, 1979, p. 261.
73. Annika Borgenstam and M. Hillert: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1499–510.
74. F. Fazeli and M. Militzer: 2003, unpublished research.
75. G.R. Purdy, D.H. Weichert, and J.S. Kirkaldy: Trans. TMS, 1964, vol. 230, p. 1025.
76. M. Hillert: KTH, Stockholm, private communication, Sept. 2002.
77. M.M. Rao and P.G. Winchell: Trans. TMS-AIME, 1967, vol. 239, p. 956.
78. M.M. Rao, R.J. Russell, and P.G. Winchell: Trans. TMS-AIME, 1967, vol. 239, p. 634.
79. D. Quidort and Y. Brechet: Iron Steel Inst. Jpn. Int., in press.
80. D. Quidort and Y. Brechet: Scripta Mater., 2002, vol. 47, p. 151.10.1016/S1359-6462(02)00121-5 ↗
81. R.F. Hehemann and A.R. Troiano: Met. Progr. 1956, vol. 70 (2), p. 97.
82. R.F. Hehemann, K.R. Kinsman, and H.I. Aaronson: Metall. Trans., 1972, vol. 3, pp. 1077–94.10.1007/BF02642439 ↗
83. E.S. Davenport: Trans. ASM, 1939, vol. 27, p. 837.
84. A. Hultgren: Kungl. Svenska Vet. Akad. Handl., 1953, vol. 4, p. 3.
85. H.I. Aaronson, G. Spanos, and W.T. Reynolds, Jr.: Scripta Mater., 2002, vol. 47, p. 139.10.1016/S1359-6462(02)00119-7 ↗
86. H.J. Lee, G. Spanos, G.J. Shiflet, and H.I. Aaronson: Acta Metall., 1988, vol. 36, p. 1129.10.1016/0001-6160(88)90166-6 ↗
87. W.T. Reynolds, Jr., S.K. Liu, F.Z. Li, S. Hartfield, and H.I. Aaronson: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 1479–91.10.1007/BF02672563 ↗
88. N.F. Kennon and N.F. Kaye: Metall. Mater. Trans. A, 1982, vol. 13A, pp. 975–78.10.1007/BF02643393 ↗
89. H. Modin and S. Modin: Jernkont. Ann., 1955, vol. 139, p. 481.
90. S. Modin: Jernkont. Ann., 1958, vol. 142, p. 37.
91. H.I. Aaronson: Trans. AIME, 1958, vol. 212, p. 212.
92. M. Hillert: Decomposition of Austenite by Diffusional Processes, Interscience, New York, NY, 1962, p. 197.
93. J.R. Blanchard, R.M. Parke, and A.J. Herzig: Trans. ASM, 1941, vol. 29, p. 317.
94. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10A, pp. 895–907.10.1007/BF02658309 ↗
95. H. Goldenstein and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1465–78.10.1007/BF02672562 ↗
96. F.G. Berry and R.W.K. Honeycombe: Metall. Trans., 1970, vol. 1, pp. 3279–86.10.1007/BF03037854 ↗
97. D.A. Scott, W.M. Armstrong, and F.A. Forward: Trans. ASM, 1949, vol. 41, p. 1145.
98. A. Hultgren: Trans. ASM, 1947, vol. 39, p. 915.
99. T. Tanaka, H.I. Aaronson, and M. Enomoto: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 561–80.10.1007/BF02663906 ↗
100. H. Guo, H.I. Aaronson, M. Enomoto, and G.R. Purdy: McMaster University, Hamilton, ON, Canada, unpublished research, 2002.