journal article·2006-10

TearSim: A two-phase model addressing hot tearing formation during aluminum direct chill casting

Mohammed M’Hamdi, Asbjørn Mo, Hallvard G. Fjær

Publisher page

Abstract

A two-phase mathematical model for the study of hot tearing formation is presented. The model accounts for the main phenomena associated with the formation of hot tears, i.e., the lack of feeding at the late stages of solidification and the localization of viscoplastic deformation. The model incorporates an advanced viscoplastic constitutive model for the coherent part of the mushy zone, allowing for the possibility of dilatation/densification of the semisolid skeleton under applied deformation. Based on quantities computed by the model, a hot tearing criterion is proposed where liquid feeding difficulties and viscoplastic deformation at the late stages of solidification are taken into account. The model is applied to study hot tearing formation during the start-up phase for direct-chill (DC) casting of extrusion ingots, and to discuss the effect of different phenomena and process parameters. The modeling results are also compared to experimentally measured hot tearing susceptibilities, and the model is able to reproduce known experimental trends such as the effect of the casting speed and the importance of the design of the starting block.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. J. Campbell: Castings, Butterworth-Heinemann, London, 1991, pp. 219–29.
2. M.L. Nedreberg: Ph.D. Thesis, University of Oslo, Oslo, February 1991.
3. G.K. Sigworth: AFS Trans., 1999, vol. 106, pp. 1053–69.
4. U. Feurer: Giesserei Forschung, 1976, vol. 28, p. 75.
5. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
6. W.S. Pellini: Foundry, 1952, vol. 80, pp. 125–33.
7. Y.F. Guven and J.D. Hunt: Cast Metals, 1988, vol. 1, pp. 104–11.10.1080/09534962.1988.11818955 ↗
8. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1461–72.10.1007/s11661-000-0264-2 ↗
9. A. Mo and I. Farup: in Modeling of Casting, Welding and Advanced Solidification Processes IX, P.R. Sahm, P.N. Hansen, and J.G. Conley, eds., Shaker Verlag, Aachen, Germany, 2000, pp. 56–62.
10. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349–61.10.1007/BF02651234 ↗
11. M. M’Hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081–93.10.1007/s11661-002-0040-6 ↗
12. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plast., 1997, vol. 13 (3), pp. 215–35.10.1016/S0749-6419(97)00009-0 ↗
13. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plast., 1999, vol. 15, pp. 981–1008.10.1016/S0749-6419(99)00017-0 ↗
14. C.L. Martin, M. Braccini, and M. Suéry: Mater. Sci. Eng., 2002, vol. A325, pp. 293–302.
15. O. Ludwig, B. Commet, J.-M. Drezet, C.L. Martin, and M. Suéry: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 183–90.
16. H.G. Fjær and A. Mo: Metall. Trans. B, 1990, vol. 21B, pp. 1049–61.
17. H.G. Fjær, E.J. Holm, and M. M’Hamdi: Aluminium, 2002, vol. 78, pp. 843–47.
18. M. M’Hamdi, S. Benum, D. Mortensen, H.G. Fjær, and J.-M. Drezet: Metall. Mater. Trans., 2003, vol. 34A, pp. 1941–52.10.1007/s11661-003-0159-0 ↗
19. M. M’Hamdi and A. Mo: in Light Metals, W. Schneider, ed., TMS-AIME, Warrendale, PA, 2002, pp. 709–16.
20. A. Mo, M. M’Hamdi, and H.G. Fjær: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., 2003, TMS, Warrendale, PA, pp. 199–206.
21. M. M’Hamdi, H.G. Fjær, A. Mo, S. Benum, and D. Mortensen: in Solidification of Aluminum Alloys, Q. Han, H.G. Chu, and D.A. Granger, eds., TMS, Warrendale, PA, 2004, pp. 191–99.
22. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1989, p. 85.
23. AA. Stangeland, A. Mo, Ø. Nielsen, D. Eskin, and M. M’Hamdi: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2903–15.10.1007/s11661-004-0238-x ↗
24. D. Eskine and L. Katgerman: in Continuous Casting, K. Ehrke and W. Schneider, eds., Wiley-VCH Verlag, New York, NY, 2000, pp. 54–60.
25. C.L. Martin, O. Ludwig, and M. Suéry: Proc. WCCM V, J. Eberhardsteiner, H.A. Mang, and F.G. Rammerstorfer, eds., Vienna, Austria, Vienna University of Technology, Vienna, 2002.
26. O. Ludwig, C.L. Martin, and M. Suéry: Mater. Forum 2004, vol. 28, pp. 357–62.
27. O. Ludwig, J.-M. Drezet, C.L. Martin, and M. Suéry: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1525–35.10.1007/s11661-005-0244-7 ↗
28. J.C. Michel and P. Suquet: J. Mech. Phys. Solids, 1992, vol. 40, pp. 783–812.10.1016/0022-5096(92)90004-L ↗
29. J.M. Duva and P.D. Crow: Acta Metall., 1992, vol. 40, pp. 31–35.10.1016/0956-7151(92)90196-L ↗
30. O. Ludwig: Ph.D. Thesis, Institut National Polytechnique de Grenoble, Grenoble, Feb. 2004.
31. J. Ampuero, C. Charbon, A.F.A. Hoadley, and M. Rappaz: in Materials Processing in The Computer Age, V.R. Voller, M.S. Stachowicz, and B.G. Thomas, eds., TMS, Warrendale, PA, 1991, pp. 377–88.
32. J.-M. Drezet, O. Ludwig, M. M’Hamdi, H.G. Fjær, and C.L. Martin: in Light Metals, A.T. Tabereaux, ed., TMS, Warrendale, PA, 2004.
33. B. Magnin, L. Katgerman, and B. Hannart: in Modeling of Casting, Welding and Advanced Solidification Processes X, M. Cross and J. Campbell, eds., 1995 pp. 303–10.
34. H.G. Fjær, E.K. Jensen, and A. Mo: Proc. 5th Int. Aluminium Extrusion Technology Seminar, R.I. Werner, and V.R. Bird, eds., The Aluminum Association, Aluminum Extruders Council, U.S. 1992, pp. 113–20.
35. D.J. Lahaie and M. Bouchard: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 697–705.10.1007/s11663-001-0124-5 ↗
36. M. Rappaz, J.-M. Drezet, P.-D. Grasso, and A. Jacot: in Modelling of Casting, Welding and Advanced Solidification Processes X, D. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 53–60.
37. V. Mathier, A. Jacot, and M. Rappaz: Modelling Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 1–12.10.1088/0965-0393/12/3/009 ↗
38. A.G. Evans and A. Rana: Acta Metall., 1980, vol. 28, pp. 129–41.10.1016/0001-6160(80)90062-0 ↗
39. S. Benum, D. Mortensen, and H. Fjær: in Continuous Casting, K. Ehrke and W. Schneider, eds., Wiley-VCH Verlag, New York, NY, 2000, pp. 54–60.10.1002/3527607331.ch8 ↗
40. W. Schneider and E.K. Jensen: in Light Metals, C.M. Bickert, ed., TMS-AIME, Warrendale, PA, 1990, pp. 931–36.
41. E.K. Jensen and W. Schneider: in Light Metals, C.M. Bickert, ed., TMS-AIME, Warrendale, PA, 1990, pp. 937–43.
42. J.A. Spittle and A.A. Cushway: Met. Technol., 1983, vol. 10, pp. 6–13.10.1179/030716983803291226 ↗
43. B. Warrington and D.G. McCartney: Cast Met., 1989, vol. 2 (3), pp. 135–43.
44. D. Mortensen: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 119–33.10.1007/s11663-999-0012-y ↗
45. A.L. Dons, E.K. Jensen, Y. Langsrud, E. Trømborg, and S. Brusethaug: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2135–46.10.1007/s11661-999-0025-9 ↗
46. C. Pequet, M. Gremaud, and M. Rappaz: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2095–2106.10.1007/s11661-002-0041-5 ↗
47. M. M’Hamdi and A. Mo: Mater. Sci. Eng., A, 2005, vols. 413–14, pp. 105–08.10.1016/j.msea.2005.09.050 ↗
48. D.C.G. Lees: J. Inst. Met., 1946–47, vol. 73, pp. 537–40.
49. D.E.J. Talbot: Int. Metall. Rev., 1975, vol. 20, pp. 166–84.10.1179/imr.1975.20.1.166 ↗
50. R.S. Barnett, D.H. St John, and J.A. Taylor: in Solidification of Aluminum Alloys, Q. Han M.G. Chu, and D.A. Granger, eds., TMS, Warrendale, PA, 2004, pp. 201–09.