journal article·2009-05Open access

Processing and Behavior of Fe-Based Metallic Glass Components via Laser-Engineered Net Shaping

B. Zheng, Y. Zhou, J. E. Smugeresky, E. J. Lavernia

Abstract

In this article, the laser-engineered net shaping (LENS) process is implemented to fabricate net-shaped Fe-based Fe-B-Cr-C-Mn-Mo-W-Zr metallic glass (MG) components. The glass-forming ability (GFA), glass transition, crystallization behavior, and mechanical properties of the glassy alloy are analyzed to provide fundamental insights into the underlying physical mechanisms. The microstructures of various LENS-processed component geometries are characterized via scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The results reveal that the as-processed microstructure consists of nanocrystalline α-Fe particles embedded in an amorphous matrix. An amorphous microstructure is observed in deposited layers that are located near the substrate. From a microstructure standpoint, the fraction of crystalline phases increases with the increasing number of deposited layers, effectively resulting in the formation of a functionally graded microstructure with in-situ-precipitated particles in an MG matrix. The microhardness of LENS-processed Fe-based MG components has a high value of 9.52 GPa.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Laser Material Processing Techniques · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–44.10.1063/1.110520 ↗
2. A. Inoue: Mater. Trans. JIM, 1995, vol. 36, pp. 866–75.10.2320/matertrans1989.36.866 ↗
3. W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56.10.1557/S0883769400053252 ↗
4. W.H. Wang, Z.X. Bao, C.X. Liu, and D.Q. Zhao: Phys. Rev. B, 2000, vol. 61, pp. 3166–69.10.1103/PhysRevB.61.3166 ↗
5. Y.H. Liu, G. Wang, R.J. Wang, D.Q. Zhao, M.X. Pan, and W.H. Wang: Science, 2007, vol. 315, pp. 1385–88.10.1126/science.1136726 ↗
6. J. Zhang and Y. Zhao: Nature, 2004, vol. 430, pp. 332–35.10.1038/nature02715 ↗
7. D.C. Hofmann, J.-Y. Suh, A. Wiest, G. Duan, M.-L. Lind, M.D. Demetriou, and W.L. Johnson: Nature, 2008, vol. 451, pp. 1085–89.10.1038/nature06598 ↗
8. Z.P. Lu, C.T. Liu, J.R. Thompson, and W.D. Porter: Phys. Rev. Lett., 2004, vol. 92, pp. 245503–245511.10.1103/PhysRevLett.92.245503 ↗
9. C.T. Liu, M.F. Chisholm, and M.L. Miller: Intermetallics, 2002, vol. 10, pp. 1105–12.10.1016/S0966-9795(02)00131-0 ↗
10. Z.P. Lu and C.T. Liu: Phys. Rev. Lett., 2003, vol. 91, pp. 115505–115511.10.1103/PhysRevLett.91.115505 ↗
11. A. Inoue, T. Masumoto, S. Arakawa, and T. Iwadachi: Mater. Trans., JIM, 1978, vol. 19, pp. 303–04.10.2320/matertrans1960.19.303 ↗
12. A. Inoue, T. Zhang, and T. Masumoto: Mater. Trans., JIM, 1989, vol. 30, pp. 965–72.10.2320/matertrans1989.30.965 ↗
13. A. Inoue, T. Zhang, and T. Masumoto: J. Non-Cryst. Solids, 1993, vols. 156–158, pp. 473–80.10.1016/0022-3093(93)90003-G ↗
14. H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: J. Electrochem. Soc., 1991, vol. 138, pp. 76–81.10.1149/1.2085581 ↗
15. K. Kobayashi, K. Hashimoto, and T. Masumoto: Res. Inst. Tohoku Univ., A, 1981, vol. 29, pp. 284–95.
16. H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corros. Sci., 1992, vol. 33, pp. 225–36.10.1016/0010-938X(92)90147-U ↗
17. T.R. Anthony and H.E. Cline: J. Appl. Phys., 1978, vol. 49, pp. 1248–55.10.1063/1.325015 ↗
18. Y.-W. Kim, P.R. Strutt, and H. Nowotny: Metall. Trans. A, 1979, vol. 10A, pp. 881–86.10.1007/BF02658307 ↗
19. Q. Zhu, S. Qu, X. Wang, and Z. Zou: Appl. Surf. Sci., 2007, vol. 253, pp. 7060–64.10.1016/j.apsusc.2007.02.055 ↗
20. T.T. Wong and G.Y. Liang: Mater. Charact., 1997, vol. 38, pp. 85–89.10.1016/S1044-5803(97)80027-7 ↗
21. X. Wu, B. Xu, and Y. Hong: Mater. Lett., 2002, vol. 56, pp. 838–41.10.1016/S0167-577X(02)00624-9 ↗
22. T.M. Yue, Y.P. Su, and H.O. Yang: Mater. Lett., 2007, vol. 61, pp. 209–12.10.1016/j.matlet.2006.04.033 ↗
23. C.L. Atwood, M.L. Griffith, L.D. Harwell, D.L. Greene, D.E. Reckaway, M.T. Ensz, D.M. Keicher, M.E. Schlienger, J.A. Romero, M.S. Oliver, F.P. Jeantette, and J.E. Smugeresky: Sandia Report No. SAND99-0739, Sandia National Laboratories, Albuquerque, NM, 1999, pp. 1–31.
24. B. Zheng, Y. Lin, J.E. Smugeresky, Y. Zhou, and E.J. Lavernia: TMS Lett., 2005, vol. 4. pp. 113–14.
25. M.L. Griffith, M.E. Schlienger, L.D. Harwell, M.S. Oliver, M.D. Baldwin, M.T. Ensz, M. Essien, J. Brooks, C.V. Robino, J.E. Smugeresky, W.H. Hofmeister, M.J. Wert, and D.V. Nelson: Mater. Des., 1999, vol. 20, pp. 107–13.10.1016/S0261-3069(99)00016-3 ↗
26. E.J. Lavernia and Y. Wu: Spray Atomization and Deposition, John Wiley & Sons, Inc., West Sussex, United Kingdom, 1996, pp. 70–77.
27. S. Annavarapu and R. Doherty: Int. J. Powder Metall., 1993, vol. 29, pp. 331–44.
28. K.R. Cardoso, A.G. Escorial, M. Lieblich, and W.J. Botta: Mater. Sci. Eng., A, 2001, vol. 315, pp. 89–97.10.1016/S0921-5093(01)01197-2 ↗
29. A. Zambon, B. Badan, G. Vedovato, and E. Ramous: Mater. Sci. Eng., A, 2001, vols. 304–306, pp. 452–56.10.1016/S0921-5093(00)01489-1 ↗
30. Y. Liu, Z. Liu, S. Guo, Y. Du, B. Huang, J. Huang, S. Chen, and F. Liu: Intermetallics, 2005, vol. 13, pp. 393–98.10.1016/j.intermet.2004.07.026 ↗
31. J.F. Ready and D.F. Farson: LIA Handbook of Laser Materials Processing: Laser Institute America, Magnolia Publishing, Orlando, FL, 2001, pp. 181–82.
32. R. Ye, J.E. Smugeresky, B. Zheng, Y. Zhou, and E.J. Lavernia: Mater. Sci. Eng., A, 2006, vol. 428, pp. 47–53.10.1016/j.msea.2006.04.079 ↗
33. B. Zheng, Y. Zhou, J.E. Smugeresky, J.M. Schoenung, and E.J. Lavernia: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2228–36.10.1007/s11661-008-9557-7 ↗
34. A. Basu, A.N. Samant, S.P. Harimkar, J.D. Majumdar, I. Manna, and N.B. Dahotre: Surf. Coat. Technol., 2008, vol. 202, pp. 2623–31.10.1016/j.surfcoat.2007.09.028 ↗
35. W. Hofmeister, M. Wert, J.E. Smugeresky, J.A. Philliber, M. Griffith, and M. Ensz: JOM-e, available online at:http://www.tms.org/pubs/journals/JOM/9907/Hofmeister/Hofmeister-9907.html, 1999, vol. 51.
36. B. Zheng, L. Ajdelsztajn, J.M. Schoenung, and E.J. Lavernia: 4th ISEC, St. Paul, MN, 2005, p. 9.
37. T. Egami: Mater. Trans., JIM, 2002, vol. 43, pp. 510–17.10.2320/matertrans.43.510 ↗
38. eFunda: http://www.efunda.com/materials/alloys/alloy_home/steels_properties.cfm.
39. Z.J. Yan, J.F. Li, S.R. He, and Y.H. Zhou: Mater. Res. Bull., 2003, vol. 38, pp. 681–89.10.1016/S0025-5408(03)00010-2 ↗
40. W.H. Wang: Prog. Mater. Sci., 2007, vol. 52, pp. 540–52.10.1016/j.pmatsci.2006.07.003 ↗
41. B. Zheng: Ph.D. Dissertation, University of California, Davis, CA, 2006, pp. 242–43.
42. M.L. Lee, Y. Li, and C.A. Schuh: Acta Mater., 2004, vol. 52, pp. 4121–31.10.1016/j.actamat.2004.05.025 ↗
43. J. Beuth and N. Klingbeil: JOM, 2001, vol. 53, pp. 36–39.10.1007/s11837-001-0067-y ↗