journal article·2006-09

Microstructural study of transient liquid phase bonded cast INCONEL 738LC superalloy

O. A. Idowu, O. A. Ojo, M. C. Chaturvedi

Publisher page

Abstract

The microstructure of the transient liquid phase (TLP) bonded joint of a cast INCONEL 738LC superalloy, made with a commercial Ni-Cr-B filler alloy, Nicrobraz 150, was examined by analytical scanning and transmission electron microscopic techniques. Due to incomplete isothermal solidification at the bonding temperature, the residual liquid interlayer transformed to nonequilibrium eutectic microconstituents consisting of chromium-rich M5B3, nickel-rich M23B6, and nickel-based γ solid solution phases. Also, a significant volume fraction of complex fcc Cr-Mo-W rich carboborides was observed in the joint/base alloy interface region. This is contrary to the predictions of the currently available TLP models that predict a precipitate-free joint/base alloy interface. It is suggested that solid-state diffusion of boron prior to completion of equilibration process induced the formation of carbo-boride phase, which needs to be adequately considered to develop an optimum postbraze heattreatment process to produce a joint with optimum properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Alloy IN 738: Technical Data, INCO, New York, NY, pp. 1–11.
2. S.D. Duvall and W.A. Owczarski:Welding J., 1967, vol. 46 (9), pp. 423s-432s.
3. M.H. Haafkens and G.H. Matthey:Welding J., 1982, vol. 61 (25), pp. 25–30.
4. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi:Scripta Mater., 2004, vol. 50, pp. 641–46.10.1016/j.scriptamat.2003.11.025 ↗
5. S.D. Duvall, W.A. Owczarski, and D.F. Paulonis:Welding J., 1974, vol. 53 (4), pp. 203–14.
6. G.S. Hoppin and T.F. Berry:Welding J., 1970, vol. 49 (11), pp. 505s-509s.
7. I. Tuah-Poku, M. Dollar, and T.B. Massalski:Metall. Trans. A, 1988, vol. 19A, pp. 675–86.10.1007/BF02649282 ↗
8. W.D. MacDonald and T.W. Eagar: inTransient Liquid Phase Bonding Processes, The Metal Science of Joining, M.J. Cleslak, J.H. Perepezko, S. Kang, and M.E. Glicksman, eds., TMS, Warrendale, PA, 1992, pp. 93–100.
9. Y. Zhou, W.F. Gale, and T.H. North:Int. Mater. Rev., 1995, vol. 40 (5), pp. 181–96.10.1179/imr.1995.40.5.181 ↗
10. W.F. Gale and D.A. Butts:Sci. Technol. Welding Joining, 2004, vol. 9 (4), pp. 283–99.10.1179/136217104225021724 ↗
11. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi:Sci. Technol. Welding Joining, 2004, vol. 9 (6), pp. 532–40.10.1179/174329304X8702 ↗
12. C.H. Lee and T.H. North:71st American Welding Society Convention, Anaheim, CA, Apr. 1990, AWS, Miami, FL, 1990, pp. 273–76.
13. H. Nakagawa, C.H. Lee, and T.H. North:Metall. Trans. A, 1991, vol. 22A, pp. 543–55.10.1007/BF02656822 ↗
14. W.F. Gale and E.R. Wallach:Metall. Trans. A, 1991, vol. 22A, pp. 2451–57.10.1007/BF02665011 ↗
15. W.F. Gale and E.R. Wallach:Mater. Sci. Technol., 1991, vol. 7, pp. 1143–8.10.1179/mst.1991.7.12.1143 ↗
16. C.Y. Su, C.P. Chou, B.C. Wu, and W.C. Lih:Mater. Sci. Technol., 1999, vol. 15 (1), pp. 316–22.10.1179/026708399773002845 ↗
17. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi:Sci. Technol. Welding JOI., 2004, vol. 9 (3), pp. 209–20.10.1179/136217104225012175 ↗
18. O.A. Idowu, N.L. Richards, and M.C. Chaturvedi:Mater. Sci. Eng., A, 2005, vol. 397 (1–3), pp. 98–112.10.1016/j.msea.2005.01.055 ↗
19. M.M. Schwartz:Brazing, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 2003, pp. 1–382.
20. P.K. Liao and K.E. Spear:ASM Handbook, vol. 3,Alloy Phase Diagrmas, ASM INTERNATIONAL, Materials Park, OH, 1992, p. 2.81.
21. P.K. Liao and K.E. Spear:ASM Handbook, vol. 3,Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1992, vol. 3, p. 2.83.
22. K. Ohsasa, T. Shinmura, and T. Narita:J. Phase Equlibrium, 1999, vol. 20 (3), pp. 199–206.10.1361/105497199770335721 ↗
23. M.J. Donachie and S.J. Donachie:Superalloys—A Technical Guide, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 2002, p. 27.10.31399/asm.tb.stg2.9781627082679 ↗
24. K.W. Andrews, D.J. Dyson, and S.R. Keown:Interpretation of Electron Diffraction Patterns, 2nd ed., Adam Hilger, London, 1971, p. 202.
25. A.M. Abdel-Latif, J.M. Corbett, and D.M.R. Taplin:Met. Sci, 1982, vol. 16, pp. 90–96.10.1179/030634582790427181 ↗
26. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi:Mater. Sci. Technol., 2004, vol. 20, pp. 1027–34.10.1179/026708304225019948 ↗
27. H.E. Collins:Trans. AIME, 1969, vol. 62, pp. 82–104.
28. L.Z. He, Q. Zheng, X.F. Sun, H.R. Guan, Z.Q. Hu, A.K. Tieu, C. Lu, and H.T. Zhu:Mater. Sci. Eng., A, 2005, vol. 397, pp. 297–304.10.1016/j.msea.2005.02.038 ↗
29. A.K. Koul and R. Thamburaj:Metall. Trans. A, 1985, vol. 16A, pp. 17–26.10.1007/BF02656707 ↗
30. C.T. Sims, N.S. Stoloff, and W.C. Hagel:Superalloys II, High Temperature Materials for Aerospace and Industrial Power, John Wiley & Sons, Inc., New York, NY, 1987, p. 172.
31. X. Huang: Ph.D. Dissertation, University of Manitoba, Winnipeg, 1994.
32. S.R. Keown and F.B. Pickering:Some Aspects of the Occurrence of Boron in Alloy Steels, Met. Sci., 1977, vol. 11 (7), pp. 225–34.
33. K. Stiller, J. Nilson, and K. Norring:Metall. Trans. A, 1996, vol. 27A, pp. 327–41.10.1007/BF02648410 ↗
34. B. Hu and H. Li:Proc. Superalloys 1980 Conf., Champion, PA, 1980, American Society for Metals, Metals Park, OH, 1980, p. 423–29.
35. K.M. Delargy and G.D.W. Smith:Metall Trans. A, 1983, vol. 14A, pp. 1771–83.10.1007/BF02645547 ↗
36. O.A. Ojo: Ph.D. Dissertation, University of Manitoba, Winnipeg, 2005.
37. X. Wu, R.S. Chandel, and H. Li:J. Mater. Sci., 2001, vol. 36, pp. 1539–46.10.1023/A:1017513200502 ↗
38. B. Jahnke and J. Demny:Thin Solid Films, 1983, vol. 110, pp. 225–35.10.1016/0040-6090(83)90240-7 ↗