journal article·2002-02

Creep at low stresses: An evaluation of diffusion creep and Harper-Dorn creep as viable creep mechanisms

Terence G. Langdon

Publisher page

Abstract

High-temperature creep experiments often reveal a transition at very low stresses to a region where the stress exponent is reduced to a value lying typically in the range of ∼1 to 2. This region is generally associated with the occurrence of a new creep mechanism, such as grain-boundary sliding, diffusion creep, and/or Harper-Dorn creep. Several recent reports have suggested that diffusion creep and Harper-Dorn creep may not be viable creep mechanisms. This article examines these two processes and demonstrates that there is good evidence supporting the occurrence of both creep mechanisms under at least some experimental conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. P. Phillips: Proc. Phys. Soc. London, 1903–1905, vol. 19, pp. 491–511.10.1088/1478-7814/19/1/342 ↗
2. E.N. daC. Andrade: Proc. R. Soc. A, 1910, vol. 84, pp. 1–12.
3. E.N. daC. Andrade: Proc. R. Soc. A, 1914, vol. 90, pp. 329–42.
4. J.E. Bird, A.K. Mukherjee, and J.E. Dorn: in Quantitative Relation Between Properties and Microstructure, D.G. Brandon and A. Rosen, eds., Israel Universities Press, Jerusalem, 1969, pp. 255–342.
5. F.A. Mohamed and T.G. Lagdon: Acta Metall., 1974, vol. 22, pp. 779–88.10.1016/0001-6160(74)90088-1 ↗
6. P. Yavari and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 2181–96.10.1016/0001-6160(82)90139-0 ↗
7. W.D. Nix and B. Ilschner: in Strength of Metals and Alloys (ICSMA 5), P. Haasen, V. Gerold, and G. Kostorz, eds., Pergamon, Oxford, United Kingdom, 1980, vol. 3, pp. 1503–30.
8. O.D. Sherby and P.M. Burke: Prog. Mater. Sci., 1967, vol. 13, pp. 325–90.
9. S.V. Raj and T.G. Langdon: Acta Metall., 1989, vol. 37, pp. 843–52.10.1016/0001-6160(89)90011-4 ↗
10. F.R.N. Nabarro: Report of a Conference on Strength of Solids, The Physical Society, London, 1948, pp. 75–90.
11. C. Herring: J. Appl. Phys., 1950, vol. 21, pp. 437–45.10.1063/1.1699681 ↗
12. R.L. Coble: J. Appl. Phys., 1963, vol. 34, pp. 1679–82.10.1063/1.1702656 ↗
13. J. Harper and J.E. Dorn: Acta Metall, 1957, vol. 5, pp. 654–65.10.1016/0001-6160(57)90112-8 ↗
14. F.A. Mohamed and J. Wolfenstine: in Hot Deformation of Aluminum Alloys, T.G. Langdon, H.D. Merchant, J.G. Morris, and M.A. Zaidi, eds., TMS, Warrendale, PA, 1991, pp. 223–37.
15. T.G. Langdon and R.B. Vastava: in Mechanical Testing for Deformation Model Development, R.W. Rhode and J.C. Swearengen, eds., ASTM, Philadelphia, PA, 1982, Special Technical Publication STP 765, pp. 435–51.10.1520/STP28901S ↗
16. T.G. Langdon: Mater. Sci. Eng., 1994, vol. A174, pp. 225–30.10.1016/0921-5093(94)91092-8 ↗
17. W.R. Cannon: Phil. Mag., 1972, vol. 25, pp. 1489–97.10.1080/14786437208223868 ↗
18. W.A. Rachinger: J. Inst. Met., 1952–53, vol. 81, pp. 33–41.
19. T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
20. F.A. Mohamed and T.G. Langdon: Scripta Metall., 1976, vol. 10, pp. 759–762.10.1016/0036-9748(76)90358-6 ↗
21. P.K. Chaudhury and F.A. Mohamed: Acta Metall., 1988, vol. 36, pp. 1099–1110.10.1016/0001-6160(88)90163-0 ↗
22. P.K. Chaudhury, V. Sivaramakrishnan and F.A. Mohamed: Metall. Trans. A, 1988, vol. 19A, pp. 2741–2752.10.1007/BF02645809 ↗
23. R.Z. Valiev and T.G. Langdon: Acta Metall., 1993, vol. 41, pp. 949–54.10.1016/0956-7151(93)90029-R ↗
24. L.K.L. Falk, P.R. Howell, G.L. Dunlop and T.G. Langdon: Acta Metall., 1986, vol. 34, pp. 1203–1214.10.1016/0001-6160(86)90007-6 ↗
25. B. Wilshire: Proc. 4th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, B. Wilshire and R.W. Evans, eds., The Institute of Metals, London, 1990, pp. 1–9.
26. O.A. Ruano, J. Wadsworth, J. Wolfenstine, and O.D. Sherby: Mater. Sci. Eng., 1993, vol. A165, pp. 133–41.10.1016/0921-5093(93)90747-3 ↗
27. W. Blum and W. Maier: Phys. Status Solidi (a), 1999, vol. 171, pp. 467–74.10.1002/(SICI)1521-396X(199902)171:2<467::AID-PSSA467>3.0.CO;2-8 ↗
28. B. Burton and G.L. Reynolds: Mater. Sci. Eng., 1995, vol. A191, pp. 135–41.10.1016/0921-5093(94)09643-0 ↗
29. F.R.N. Nabarro: Phys. Status Solidi (a), 2000, vol. 182, pp. 627–29.10.1002/1521-396X(200012)182:2<627::AID-PSSA627>3.0.CO;2-E ↗
30. J. Wadsworth, O.A. Ruano, and O.D. Sherby: in Creep Behavior of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., TMS, Warrendale, PA, 1999, pp. 425–39.
31. T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 733–37.10.1016/1359-6462(96)00219-9 ↗
32. T.G. Langdon: Mater. Sci. Eng., 2000, vol. A283, pp. 266–73.10.1016/S0921-5093(00)00624-9 ↗
33. I.M. Lifshitz: Sov. Phys. JETP, 1963, vol. 17, pp. 909–20.
34. G.B. Gibbs: Mém. Sci. Rev. Mét., 1965, vol. 62, pp. 781–86.
35. J.E. Harris: Met. Sci. J., 1973, vol. 7, pp. 1–6.10.1016/0036-9748(73)90170-1 ↗
36. R.C. Gifkins and T.G. Langdon: Scripta Metall., 1970, vol. 4, pp. 563–67.10.1016/0036-9748(70)90148-1 ↗
37. I.G. Crossland and J.C. Wood: Phil. Mag., 1975, vol. 31, pp. 1415–19.10.1080/00318087508228692 ↗
38. E.H. Aigeltinger and R.C. Gifkins: J. Mater. Sci., 1975, vol. 10, pp. 1889–1903.10.1007/BF00754479 ↗
39. R.C. Gifkins, T.G. Langdon, and D. McLean: Met. Sci., 1975, vol. 9, pp. 141–44.10.1016/0036-9748(75)90583-9 ↗
40. B.-N. Kim and K. Hiraga: Scripta Mater., 2000, vol. 42, pp. 451–56.10.1016/S1359-6462(99)00369-3 ↗
41. S.S. Sahay and G.S. Murty: Scripta Mater., 2001, vol. 44, pp. 841–45.10.1016/S1359-6462(00)00655-2 ↗
42. O.A. Ruano, O.D. Sherby, J. Wadsworth, and J. Wolfenstine: Scripta Mater., 1998, vol. 38, pp. 1307–14.10.1016/S1359-6462(98)00021-9 ↗
43. M.Z. Berbon and T.G. Langdon: J. Mater. Sci. Lett., 1996, vol. 15, pp. 1664–66.10.1007/BF00636189 ↗
44. M.Z. Berbon, D.M. Owen, and T.G. Langdon: The Johannes Weertman Symp., R.J. Arsenault, D. Cole, T. Gross, G. Kostorz, P.K. Liaw, S. Parameswaran, and H. Sizek, eds., TMS, Warrendale, PA, 1996, pp. 145–54.
45. J.G. Harper, L.A. Shepard, and J.E. Dorn: Acta Metall., 1958, vol. 6, pp. 509–18.10.1016/0001-6160(58)90114-7 ↗
46. F.A. Mohamed and T.J. Ginter: Acta Metall., 1982, vol. 30, pp. 1869–81.10.1016/0001-6160(82)90027-X ↗
47. P. Yavari, D.A. Miller, and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 871–79.10.1016/0001-6160(82)90085-2 ↗
48. T.J. Ginter, P.K. Chaudhury, and F.A. Mohamed: Acta Mater., 2001, vol. 49, pp. 263–72.10.1016/S1359-6454(00)00316-5 ↗
49. T.J. Ginter and F.A. Mohamed: Mater. Sci. Eng., 2001, in press.
50. R.C. Gifkins: J. Inst. Met., 1958–59, vol. 87, pp. 255–61.
51. G.J. Richardson, C.M. Sellars, and W.J.McG. Tegart: Acta Metall., 1966, vol. 14, pp. 1225–36.10.1016/0001-6160(66)90240-9 ↗
52. H. Yamagata: Acta Metall. Mater., 1995, vol. 43, pp. 723–29.10.1016/0956-7151(94)00267-L ↗
53. H.J. McQueen, W. Blum, S. Straub, and M.E. Kassner: Scripta Metall. Mater., 1993, vol. 28, pp. 1299–1303.10.1016/0956-716X(93)90472-5 ↗
54. M.E. Kassner, J. Pollard, E. Evangelista, and E. Cerri: Acta Metall. Mater., 1994, vol. 42, pp. 3223–30.10.1016/0956-7151(94)90420-0 ↗
55. K.R. McNee, G.W. Greenwood, and H. Jones: Scripta Mater., 2001, vol. 44, pp. 351–57.10.1016/S1359-6462(00)00570-4 ↗
56. K.R. McNee, H. Jones, and G.W. Greenwood: Proc. 9th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, J.D. Parker, ed., The Institute of Materials, London, 2001, pp. 3–13.
57. G.W. Greenwood: Scripta Metall. Mater., 1994, vol. 30, pp. 1527–30.10.1016/0956-716X(94)90302-6 ↗
58. L. Kloc: Scripta Mater., 1996, vol. 35, pp. 539–41.10.1016/1359-6462(96)00176-5 ↗
59. G.W. Greenwood: Creep Behavior of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., TMS, Warrendale, PA, 1999, pp. 413–23.
60. J. Wolfenstine, O.A. Ruano, J. Wadsworth, and O.D. Sherby: Scripta Metall. Mater., 1993, vol. 29, pp. 515–20.10.1016/0956-716X(93)90157-N ↗
61. B.W. Pickles: J. Inst. Met., 1967, vol. 95, pp. 333–37.
62. W. Vickers and P. Greenfield: J. Nucl. Mater., 1967, vol. 24, pp. 249–60.10.1016/0022-3115(67)90198-5 ↗
63. J.B. Bilde-Sørensen and D.A. Smith: Scripta Metall. Mater., 1994, vol. 30, pp. 383–86.10.1016/0956-716X(94)90393-X ↗
64. K.R. McNee, H. Jones, and G.W. Greenwood: Proc. 9th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, J.D. Parker, ed., The Institute of Materials, London, 2001, pp. 185–95.
65. P. Yavari, F.A. Mohamed, and T.G. Langdon: Acta Metall., 1981, vol. 29, pp. 1495–1507.10.1016/0001-6160(81)90184-X ↗