journal article·2002-05

Creep of tin, Sb-solution-strengthened tin, and SbSn-precipitate-strengthened tin

Rodney J. McCabe, Morris E. Fine

Publisher page

Abstract

The creep properties of tin-antimony alloys were studied up to the peritectic composition. For tin at temperatures below approximately 150 °C, creep is dominated by pipe diffusion-controlled climb with a stress exponent of 8 and activation energy of 70 kJ/mol. At high stresses, small amounts of impurities cause a transition to a less stress sensitive, most likely solute drag-controlled mechanism. Antimony atoms in solution have only a minor effect on these creep properties. Alloys with higher compositions of antimony contain whiskerlike SbSn precipitates. These alloys exhibit a discontinuous transition in stress exponent and activation energy at an intermediate stress. The creep behavior of these alloys is described fairly well by a composite theory in which the power law stress is divided by a strengthening coefficient, and the strengthening coefficient is related to the precipitate volume fraction and the aspect ratio. Using a friction stress and a strengthening coefficient simultaneously, the behavior of these alloys can be described entirely in terms of tin creep constants. Aging at 100 °C has little effect on the creep properties of the precipitation-strengthened alloys. It is expected that solder alloys strengthened by these precipitates would maintain a significant fraction of their creep strength for significant periods at temperatures below 100 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. R.N. Wild, IBM Report No. 74Z000481, IBM, Oswego, New York, NY, 1975, p. 1.
2. H. Mavoori: JOM, 2000, vol. 52, p. 29.10.1007/s11837-000-0144-7 ↗
3. Thermo-calc, L ed., Foundation for Computational Thermodynamics, Stockholm, 1996.
4. R.J. McCabe: Ph.D. Thesis, Northwestern University, Evanston, IL, 2000, pp. 1–131.
5. J.E. Breen and J. Weertman: J. Met., 1955, vol. 207, pp. 1230–34.
6. S.H. Suh, J.B. Cohen, and J. Weertman: Metall. Trans. A, 1983, vol. 14A, pp. 117–26.10.1007/BF02643744 ↗
7. F.A. Mohamed, K.L. Murty, and J.W. Morris, Jr.: Metall. Trans., 1973, vol. 4, pp. 935–40.10.1007/BF02645593 ↗
8. M.D. Mathew, S. Movva, H. Yang, and K.L. Murty: Proc. Creep Behavior of Advanced Materials for the 21st Century, TMS, Warrendale, PA, 1999, pp. 51–59.
9. F.H. Huang and H.B. Huntington: Phys. Rev. B, 1974, vol. 9, pp. 1479–88.10.1103/PhysRevB.9.1479 ↗
10. J.D. Meakin and E. Klokholm: Trans. TMS-AIME, 1960, vol. 218, pp. 463–66.
11. C. Coston and N.H. Nachtrieb: J. Phys. Chem., 1964, vol. 68, pp. 2219–29.10.1021/j100790a032 ↗
12. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982, pp. 1–40.
13. P. Adeva, G. Caruana, O.A. Ruano, and M. Torralba: Mater. Sci. Eng., 1994, vol. 194A, pp. 17–23.
14. J. Weertman: Trans. AIME, 1960, vol. 218, pp. 207–18.
15. A.H. Cottrell and M.A. Jaswon: Proc. R. Soc. London A, 1949, vol. 199, pp. 104–14.10.1098/rspa.1949.0128 ↗
16. J.C. Fisher: Acta Metall., 1954, vol. 2, pp. 9–10.10.1016/0001-6160(54)90087-5 ↗
17. H. Suzuki: Sci. Rep. Res. Inst. Tohoku Univ. A, 1957, vol. 4, p. 455.
18. J. Snoek: Physica, 1942, vol. 9, pp. 862–64.10.1016/S0031-8914(42)80061-0 ↗
19. D.L. Yaney and W.D. Nix: J. Mater. Sci., 1988, vol. 33, pp. 3088–98.10.1007/BF00551278 ↗
20. Y. Li and T.G. Langdon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 315–24.10.1007/s11661-999-0320-5 ↗
21. D. Mitlin, C.H. Raeder, and R.W.J. Messler: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 115–22.10.1007/s11661-999-0199-1 ↗
22. R.J. McCabe and M.E. Fine: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 575–80.10.1007/s11661-002-0119-0 ↗
23. V.C. Nardone and J.K. Tien: Scripta Metall., 1983, vol. 17, pp. 467–70.10.1016/0036-9748(83)90333-2 ↗
24. E. Arzt and D.S. Wilkinson: Acta Metall., 1986, vol. 34, pp. 1893–98.10.1016/0001-6160(86)90247-6 ↗
25. J. Rösler and E. Arzt: Acta Metall., 1990, vol. 38, pp. 671–83.10.1016/0956-7151(90)90223-4 ↗
26. L.M. Brown and R.K. Ham: in Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., Elsevier, Amsterdam, 1971, pp. 9–135.
27. R.S.W. Shewfelt and L.M. Brown: Phil. Mag., 1974, vol. 30, pp. 1135–45.10.1080/14786437408207265 ↗
28. M. McLean: Acta Metall., 1985, vol. 33, pp. 545–56.10.1016/0001-6160(85)90018-5 ↗
29. R. Lagneborg: Scripta Metall., 1973, vol. 7, pp. 605–14.10.1016/0036-9748(73)90222-6 ↗
30. J.D. Parker and B. Wilshire: Met. Sci, 1975, vol. 9, pp. 248–52.10.1179/030634575790445053 ↗
31. R.A. Stevens and P.E.J. Flewitt: Acta Metall., 1981, vol. 29, pp. 867–82.10.1016/0001-6160(81)90129-2 ↗
32. G. Simmons and H. Wang: Single Crystal Elastic Constants and Calculated Aggregate Properties: a Handbook by Gene Simmons and Herbert Wang, 2nd ed., MIT Press, Cambridge, MA, 1971 pp. 1–370.
33. T. Christman, A. Needleman, and S. Suresh: Acta Metall., 1989, vol. 37, pp. 3029–50.10.1016/0001-6160(89)90339-8 ↗
34. T.L. Dragone and W.D. Nix: Acta Metall., 1990, vol. 38, pp. 1941–53.10.1016/0956-7151(90)90306-2 ↗
35. G. Bao, J.W. Hutchinson, and R.M. McMeeking: Acta Metall., 1991, vol. 39, pp. 1871–82.10.1016/0956-7151(91)90156-U ↗
36. J. Rösler, G. Bao, and A.G. Evans: Acta Metall., 1991, vol. 39, pp. 2733–38.10.1016/0956-7151(91)90090-N ↗
37. K.-T. Park and F.A. Mohamed: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3119–29.10.1007/BF02669441 ↗
38. J. Rösler and M. Bäker: Acta Mater., 2000, vol. 48, pp. 3553–67.10.1016/S1359-6454(00)00109-9 ↗
39. Y. Li and T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2523–31.10.1007/s11661-998-0224-9 ↗