journal article·2012-06

The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL Alloy 740 at 1023 K (750 °C)

J. P. Shingledecker, G. M. Pharr

Publisher page

Abstract

INCONEL alloy 740 is an age-hardenable nickel-based superalloy proposed for advanced ultrasupercritical steam boiler applications operating at high stress and long times above 973 K (700 °C), where creep will be the dominate deformation mode. During high-temperature exposure, the alloy can form eta phase platelets that many have suggested may be detrimental to creep strength and ductility. In this study, creep-rupture tests were conducted on smooth and notched bars of INCONEL alloy 740 at 1023 K (750 °C) for times up to 20,000 hours. Examination of the creep-rupture life, creep ductility, failure modes, and microstructure by quantitative electron microscopy shows that a small amount of eta phase does not diminish the creep performance. Applied stress appears to have a minor effect on the precipitation of the eta phase but not its growth rate. Based on the observation that the microstructure after 20,000 hours of creep exposure has reached equilibrium in comparison to thermodynamic calculations, it is concluded that 20,000 hour creep tests are adequate for prediction of long-term creep performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. R. Viswanathan, R. Purgert, and U. Rao: Materials for Advanced Power Engineering 2002, Proc. Part II, Forschungszentrum Julich GmbH, 2002, pp. 1109–29.
2. R. Viswananthan, J.F. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis, and R. Purgert: J. Mater. Eng. Perform., 2005, vol. 14, pp. 281–92.10.1361/10599490524039 ↗
3. J.P. Shingledecker and I.G. Wright: Proc. 8th Liege Conf. on Materials for Advanced Power Engineering 2006, Forschungszentrum Jülich GmbH, Liege, Belgium, 2006, pp. 107–20.
4. G.D. Smith and H.W. Sizek: Proc. Corrosion 2000, NACE International, NACE, Houston, TX, 2000, paper no. 00256.
5. “Inconel® alloy 740,” SMC-090, Special Metals Corporation, Huntington, West Virginia, Feb. 3, 2003.
6. N.D. Evans, P.J. Maziasz, R.W. Swindeman, and G.D. Smith: Scripta Mater., 2004, vol. 51, pp. 503–07.10.1016/j.scriptamat.2004.05.047 ↗
7. S. Zhao, X. Xie, G.D. Smith, and S.J. Patel: Mater. Sci. Eng., 2003, vol. A355, pp. 96–105.10.1016/S0921-5093(03)00051-0 ↗
8. X. Xie, S. Zhao, J. Dong, G.D. Smith, B.A. Baker, and S.J. Patel: Mater. Sci. Forum, 2007, vols. 561–565, pp. 471–76.10.4028/www.scientific.net/MSF.561-565.471 ↗
9. N. Saunders, A.P. Miodownik, and J.-P. Schille: J. Mater. Sci., 2004, vol. 29, pp. 7237–43.10.1023/B:JMSC.0000048737.32055.7a ↗
10. B.W. Roberts: ASM Handbook, vol. 8, Mechanical Testing, ASM INTERNATIONAL, Metals Park, OH, 1995, pp. 343–45.
11. J.M. Church, J.M. Brear, and D.R. Humphrey: Key Eng. Mater., 2000, vols. 171–174, pp. 61–68.10.4028/www.scientific.net/KEM.171-174.61 ↗
12. G.A. Webster, S.R. Holdsworth, M.S. Loveday, K. Nikbin, I.J. Perrin, H. Purper, R.P. Skelton, and M.W. Spindler: Fatigue Fract. Eng. Mater. Struct., 2004, vol. 27, pp. 319–42.10.1111/j.1460-2695.2004.00765.x ↗
13. D.L. Marriott and P. Carter: Proc. PVP2005, Denver, Colorado, 2005, PVP2005-71419.
14. R.J. Browne, D. Lonsdale, and P.E.J. Flewitt: J. Eng. Mater. Technol., 1982, vol. 104, pp. 291–96.10.1115/1.3225079 ↗
15. M.J. Manjoine: Trans. ASME, 1975, Apr., pp. 156–61.10.1115/1.3443276 ↗
16. M.W. Spindler: Fatigue Fract. Eng. Mater. Struct., 2003 vol. 27, pp. 273–81.10.1111/j.1460-2695.2004.00732.x ↗
17. M.W. Spindler, R. Hales, and R.P. Skelton: Proc. 9th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, J.D. Parker, ed., IOM, London, United Kingdom, 2001.
18. X. Xie, S. Zhao, J. Dong, G.D. Smith, B.A. Baker, and S.L. Patel: Proc. 5th Int. Conf. on Advances in Materials Technology for Fossil Power Plants, Marco Island, FL, Oct. 3–5, 2007, Electric Power Research Institute, Palo Alto, CA, 2008, pp. 220–30.10.31399/asm.cp.am-epri-2007p0220 ↗
19. F.R.N. Nabarro and H.L. de Villiers: The Physics of Creep, Taylor & Francis Ltd., Bristol, Pennsylvania, 1995, pp. 187–90.
20. M.J. Donachie and S.J. Donachie: Superalloys A Technical Guide, ASM INTERNATIONAL, Materials Park, OH, 2002, pp. 25–27.10.31399/asm.tb.stg2.t61280025 ↗
21. L. Remy, J. Laniesse, and H. Aubert: Mater. Sci. Eng., 1979, vol. 38, pp. 227–39.10.1016/0025-5416(79)90127-7 ↗
22. Y.F. Gu, H. Harada, C. Cui, D. Ping, T. Fukuda, and J. Fujioka: Proc. 7th Int. Charles Parsons Turbine Conf., Glasgow, United Kingdom, 2007.
23. Y.H. Zhang and D.M. Knowles: Mater. Sci. Technol., 2002, vol. 18, pp. 917–23.10.1179/026708302225004838 ↗
24. X.Z. Qin, J.T. Guo, C. Yuan, C.L. Chen, and H.Q. Ye: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 3014–22.10.1007/s11661-007-9381-5 ↗
25. W.R. Sun, S.R. Guo, D.Z. Lu, and Z.Q. Hu: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 649–54.10.1007/s11661-997-0050-5 ↗
26. S. Muller and J. Rosler: Proc. 5th Int. Charles Parsons Turbine Conf., Cambridge, United Kingdom, IOM3, London, United Kingdom, July 3–7, 2000, pp. 444–58.