A new mechanism of hook formation during continuous casting of ultra-low-carbon steel slabs
Source abstract
Abstract
The initial stages of solidification near the meniscus during continuous casting of steel slabs involve many complex inter-related transient phenomena, which cause periodic oscillation marks (OMs), subsurface hooks, and related surface defects. This article presents a detailed mechanism for the formation of curved hooks and their associated OMs, based on a careful analysis of numerous specially etched samples from ultra-low-carbon steel slabs combined with previous measurements, observations, and theoretical modeling results. It is demonstrated that hooks form by solidification and dendritic growth at the liquid meniscus during the negative strip time. Oscillation marks form when molten steel overflows over the curved hook and solidifies by nucleation of undercooled liquid. The mechanism has been justified by its explanation of several plant observations, including the variability of hook and OM characteristics under different casting conditions, and the relationships with mold powder consumption and negative/positive strip times.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. E. Takeuchi and J.K. Brimacombe: Metall. Trans. B, 1984, vol. 15B, pp. 493–509.10.1007/BF02657380 ↗
2. T. Emi, H. Nakato, Y. Iida, K. Emoto, R. Tachibana, T. Imai, and H. Bada: Proc. Nat. Open Hearth and Basic Oxygen Steel Conf., 1978, vol. 61, pp. 350–61.
3. S.N. Singh and K.E. Blazek: J. Met., 1974, vol. 26 (10), pp. 17–23.
4. M.S. Jenkins, B.G. Thomas, W.C. Chen, and R.B. Mahapatra: Proc. 77th Steelmaking Conf., Chicago, IL, 1994, ISS, Warrendale, PA, 1994, pp. 337–45.
5. A. Badri, T.T. Natarajan, C.C. Snyder, K.D. Powers, F.J. Mannion, and A. Cramb: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 355–71.10.1007/s11663-005-0065-5 ↗
6. K. Schwerdtfeger and H. Sha: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 813–26.10.1007/s11663-000-0118-8 ↗
7. M. Suzuki: CAMP-ISIJ, 1998, vol. 11, pp. 42–44.
8. E. Takeuchi and J.K. Brimacombe: Metall. Trans. B, 1985, vol. 16B, pp. 605–25.10.1007/BF02654859 ↗
9. H.-J. Shin, B.G. Thomas, G.-G. Lee, J.-M. Park, C.-H. Lee, and S.-H. Kim: MS&T 2004 Conf. Proc., New Orleans, LA, 2004, The Association for Iron and Steel Technology (AIST) and TMS, Warrendale, PA, 2004, pp. 11–26.
10. H.-J. Shin, G.-G. Lee, W.-Y. Choi, S.-M. Kang, J.-H. Park, S.-H. Kim, and B.G. Thomas: AISTech 2004 Iron and Steel Technology Conf. Proc.-Vol. II, Nashville, TN, 2004, The Association for Iron and Steel Technology (AIST), Warrendale, PA, 2004, pp. 1157–70.
11. C. Genzano, J. Madias, D. Dalmaso, J. Petroni, D. Biurrun, and G.D. Gresia: Iron Steelmaker, 2002, vol. 29 (6), pp. 23–26.
12. K. Bo, G. Cheng, J. Wu, P. Zhao, and J. Wang: J. Univ. Sci. Technol. Beijing, 2000, vol. 7 (3), pp. 189–92.
13. K.D. Schmidt, F. Friedel, K. Imlau, W. Jager, and K.T. Muller: Steel Res. Int., 2003, vol. 74 (11–12), pp. 659–66.10.1002/srin.200300248 ↗
14. J.-P. Birat, M. Larrecq, J.-Y. Lamant, and J. Petegnief: Steelmaking Conf. Proc., 1991, vol. 74, pp. 39–40.
15. J.K. Brimacombe and K. Sorimachi: Metall. Trans. B, 1977, vol. 8B, pp. 489–505.10.1007/BF02696937 ↗
16. S. Harada, S. Tanaka, H. Misumi, S. Mizoguchi, and J. Horiguchi: Iron Steel Inst. Jpn. Int., 1990, vol. 30 (4), pp. 310–16.10.2355/isijinternational.30.310 ↗
17. H. Fredriksson and J. Elfsberg: Scand. J. Metall., 2002, vol. 31, pp. 292–97.10.1034/j.1600-0692.2002.00519.x ↗
18. I.G. Saucedo: Steelmaking Conf. Proc., Warrendale, PA, 1991, ISS-AIME, Warrendale, PA, 1991, pp. 43–53.
19. M.M. Wolf: PTD Conf. Proc., Nashville, TN, ISS, Warrendale, PA, 1995, pp. 99–117.
20. Y. Kitano: Tetsu-to-Hagané, 1994, vol. 80, pp. T165–68.
21. Y. Meng and B.G. Thomas: Metall. Trans. B, 2003, vol. 34B, pp. 685–705.10.1007/s11663-003-0040-y ↗
22. K. Miyazawa and T. Mizoguchi: Japan Cooperative Science Program Seminar on Solidification Processing of Advanced Materials, Kanagawa, Japan, Japan Society for Promotion of Science Tokyo, Japan, and National Science Foundation, Arlington, VA, 1989, pp. 235–44.
23. S. Takeuchi, Y. Miki, S. Itoyama, K. Kobayashi, K. Sorimachi, and T. Sakuraya: Steelmaking Conf. Proc., 1991, pp. 37–41.
24. T. Tanaka and K. Takatani: CAMP-ISIJ, 1989, vol. 2, p. 1263.
25. R.S. Laki, J. Beech, and G.J. Davies: Ironmaking and Steelmaking, 1984, vol. 11 (5), pp. 283–91.
26. B.G. Thomas: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 795–812.10.1007/s11663-002-0063-9 ↗
27. Y. Meng and B.G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 707–25.10.1007/s11663-003-0041-x ↗
28. A. Badri, T.T. Natarajan, C.C. Snyder, K.D. Powers, F.J. Mannion, M. Byrne, and A. Cramb: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 373–83.10.1007/s11663-005-0066-4 ↗
29. H. Yamamura, Y. Mizukami, and K. Misawa: Iron Steel Inst. Jpn. Int. (Suppl.), 1996, vol. 36, pp. S223–26.10.2355/isijinternational.36.Suppl_S223 ↗
30. H. Mizukami, S. Hiraki, M. Kawamoto, and T. Watanabe: Iron Steel Inst. Jpn. Int., 1999, vol. 39 (12), pp. 1261–69.10.2355/isijinternational.39.1262 ↗
31. B.G. Thomas and H. Zhu: Proc. JIM/TMS Solidification Science and Processing Conf., Honolulu, HI, 1995, TMS, Warrendale, PA, 1995, pp. 197–208.
32. E.S. Szekeres: Iron Steel Eng., 1996, vol. 73 (7), pp. 29–37.
33. F. Yigit, L.G. Hector, and O. Richmond: J. Thermal Stresses, 2002, vol. 25 (8), pp. 773–809.10.1080/01495730290074522 ↗
34. R. Hentrich, D.L. Sharma, D. Dittert, and E. Roller: Iron Steelmaker, 1986, vol. 13 (4), pp. 34–41.
35. R. Sato: Proc. National Open Hearth and Basic Oxygen Steel Conf., Detroit, MI, 1979, AIME, Warrendale, PA, 1979, pp. 48–67.
36. J. Savage and W.H. Pritchard: Iron Steel, 1954, vol. 27 (14), pp. 649–52.
37. C. Bernhard, H. Hiebler, and M.M. Wolf: Ironmaking and Steelmaking, 2000, vol. 27 (6), pp. 450–54.10.1179/030192300677778 ↗
38. S. Itoyama, H. Yamanaka, S. Tanaka, T. Yunde, and T. Kuroki: ISS Steelmaking Conf. Proc., 1988, vol. 71, pp. 97–102.
39. A.W. Cramb and F.J. Mannion: Steelmaking Conf. Proc., 1985, vol. pp. 349–59.
40. J. Sengupta and B.G. Thomas: Continuous Casting Consortium Annual Report 2005: Mathematical Models of Continuous Casting of Steel, University of Illinois, Urbana, IL, 2005, vol. IL, pp. 1–99.
41. W. Lai, M. Milone, and I.V. Samarasekera: 83rd Steelmaking Conf. Proc., ISS-AIME, Warrendale, PA, 2000, pp. 261–74.
42. O. Putz, O. Breitfeld, and S. Rodl: Steel Res., 2003, vol. 74 (11–12), pp. 686–92.10.1002/srin.200300251 ↗
43. O. Putz and S. Rodl: Steel Res., 2003, vol. 74 (2), pp. 104–13.10.1002/srin.200300168 ↗
44. X. Huang and B.G. Thomas: Can. Metall. Q., 1998, vol. 37 (3–4), pp. 197–212.10.1016/S0008-4433(98)00025-1 ↗
45. I. Jimbo and A.W. Cramb: Iron Steelmaker, 1993, vol. 20 (6), pp. 55–63.
46. J. Lee and K. Morita: Iron Steel Inst. Jpn. Int., 2002, vol. 42 (6), pp. 588–94.10.2355/isijinternational.42.588 ↗
47. S. Furuhashi, M. Yoshida, and T. Tanaka: Tetsu-to-Hagané, 1998, vol. 84 (9), pp. 625–31.10.2355/tetsutohagane1955.84.9_625 ↗
48. J. Sengupta and B.G. Thomas: JOE-e, Electronic Supplement to J. Mater. (JOM), TMS, unpublished research, 2006.
49. H. Mizukami, A. Yamanaka, and T. Watanabe: Iron Steel Inst. Jpn. Int., 2002, vol. 42 (9), pp. 964–73.10.2355/isijinternational.42.964 ↗
50. K. Tsutsumi, J. Ohtake, and M. Hino: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. 601–08.10.2355/isijinternational.40.601 ↗
51. D.T. Lui: Master’s Thesis, University of Illinois at Urbana-Champaign, Urbana, IL, 1995.