journal article·2000-05

Two-phase modeling of mushy zone parameters associated with hot tearing

Ivar Farup, Asbjorn Mo

Publisher page

Abstract

A two-phase continuum model for an isotropic mushy zone is presented. The model is based upon the general volume-averaged conservation equations, and quantities associated with hot tearing are included, i.e., after-feeding of the liquid melt due to solidification shrinkage is taken into account as well as thermally induced deformation of the solid phase. The model is implemented numerically for a one-dimensional model problem with some similarities to the aluminium direct chill (DC) casting process. The variation of some key parameters that are known to influence the hot-tearing tendency is then studied. The results indicate that both liquid pressure drop due to feeding difficulties and tensile stress caused by thermal contraction of the solid phase are necessary for the formation of hot tears. Based upon results from the one-dimensional model, it is furthermore concluded that none of the hot-tearing criteria suggested in the literature are able to predict the variation in hot-tearing susceptibility resulting from a variation in all of the following parameters: solidification interval, cooling contraction of the solid phase, casting speed, and liquid fraction at coherency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. J. Campbell: Castings, Butterworth Heinemann, London, 1991.
2. M.L. Nedreberg: Ph.D. Thesis, University of Oslo, Oslo, 1991.
3. W.S. Pellini: Foundry, 1952, pp. 125–33 and 192–99.
4. B.G. Thomas, I.V. Samarasekera, and J.K. Brimacombe: Metall. Trans. B, 1988, vol. 19B, pp. 277–87.10.1007/BF02654213 ↗
5. B.G. Thomas, I.V. Samarasekera, and J.K. Brimacombe: Metall. Trans. B, 1988, vol. 19B, pp. 289–301.10.1007/BF02654214 ↗
6. J.A. Spittle and A.A. Cushway: Met. Technol., 1983, vol. 10, pp. 6–13.10.1179/030716983803291226 ↗
7. D. Warrington and D.G. McCartney: Cast Met., 1989, vol. 2, pp. 134–43.10.1080/09534962.1989.11818994 ↗
8. A.R.E. Singer and S.A. Cottrell: J. Inst. Met., 1947, vol. 73, pp. 33–54.
9. Y.F. Guven and J.D. Hunt: Cast Met., 1988, vol. 1, pp. 104–11.10.1080/09534962.1988.11818955 ↗
10. T.W. Clyne and G.J. Davies: Br. Foundrymen, 1981, vol. 74, pp. 65–73.
11. U. Feurer: Gießerei-Forschung, 1976, vol. 28, pp. 75–80.
12. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
13. J.-M. Drezet and M. Rappaz: 1st ESAFORM Conf. on Material Forming, J.L. Chenot, J.F. Agassant, P. Montmitonnet, B. Vergnes, and N. Billon, eds., ESAFORM, Sophia Antipolis, France, 1998, pp. 49–52.
14. J.-M. Drezet and M. Rappaz: in Modelling of Casting, Welding and Advanced Solidification Processes—VIII, B.G. Thomas and C. Beckermann, eds., TMS, San Diego, CA, 1998, pp. 883–90.
15. G.K. Sigworth: AFS Trans., 1999, vol. 106, pp. 1053–69.
16. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349–61.10.1007/BF02651234 ↗
17. E. Haug and H.J. Thevik: Technical Report STP33 A93019, SINTEF, Norway, 1993.
18. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754–64.10.1007/BF02652369 ↗
19. G.M. Pharr and M.F. Ashby: Acta Metall., 1983, vol. 31, pp. 129–38.10.1016/0001-6160(83)90072-X ↗
20. J.-M. Drezet and G. Eggeler: Scripta Metall., 1994, vol. 31, pp. 757–62.10.1016/0956-716X(94)90223-2 ↗
21. P. Vicente-Hernandez, F. Decultieux, P. Schmidt, I.L. Svensson, and C. Levaillant: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 805–12.10.2355/isijinternational.35.805 ↗
22. P. Wisniewski and H.D. Brody: in Modeling and Control of Casting and Welding Processes V, M. Rappaz, M.R. Özgü, and K.W. Mahin, eds., TMS-AIME, Warrendale, PA, 1991, pp. 273–78.
23. P. Ackermann and W. Kurz: Mater. Sci. Eng., 1985, vol. 75, pp. 79–86.10.1016/0025-5416(85)90179-X ↗
24. S.A. Metz and M.C. Flemings: AFS Trans., 1970, vol. 78, pp. 453–60.
25. T.G. Nguyen, D. Favier, and M. Suery: Int. J. Plasticity, 1994, vol. 10, pp. 663–93.10.1016/0749-6419(94)90028-0 ↗
26. A.K. Dahle and L. Arnberg: Acta Mater., 1997, vol. 45, pp. 547–99.10.1016/S1359-6454(96)00203-0 ↗
27. A.K. Dahle and D.H. StJohn: Acta Mater., 1999, vol. 47, pp. 31–41.10.1016/S1359-6454(98)00342-5 ↗
28. H. Iwasaki, T. Mori, M. Mabuchi, and K. Higashi: Acta Mater., 1998, vol. 46, pp. 6351–60.10.1016/S1359-6454(98)00330-9 ↗
29. M. Rappaz and P. Thévoz: Acta Metall., 1987, vol. 35, pp. 1487–97.10.1016/0001-6160(87)90094-0 ↗
30. M. Rappaz and P. Thévoz: Acta Metall., 1987, vol. 35, pp. 2929–33.10.1016/0001-6160(87)90292-6 ↗
31. P.C. Carman: Flow of Gases through Porous Media, Butterworth Scientific, London, 1956.
32. S. Asai and I. Muchi: Trans. Iron Steel Inst. Jpn., 1978, vol. 18, pp. 90–98.10.2355/isijinternational1966.18.90 ↗
33. J. Campbell: Trans. TMS-AIME, 1969, vol. 245, pp. 2325–34.
34. J. Campbell and T.W. Clyne: Cast Met., 1991, vol. 3, pp. 224–26.10.1080/09534962.1990.11819043 ↗
35. H.G. Fjaer and A. Mo: Metall. Trans. B, 1990, vol. 21B, pp. 1049–61.
36. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13, pp. 215–35.10.1016/S0749-6419(97)00009-0 ↗
37. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13, pp. 37–259.10.1016/S0749-6419(96)00052-6 ↗
38. J. Campbell: Metallography, 1971, vol. 4, pp. 269–78.10.1016/0026-0800(71)90018-8 ↗
39. T.S. Piwonka and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 1157–65.
40. E. Haug, A. Mo, and H. Thevik: Int. J. Heat Mass Transfer, 1995, vol. 38, pp. 1553–63.10.1016/0017-9310(94)00286-5 ↗
41. C.A. Fletcher: Computational Techniques for Fluid Dynamics, vol. 1, 2nd ed., Springer-Verlag, Berlin, Heidelberg, New York, 1991.10.1007/978-3-642-58239-4 ↗