journal article·2002-04

Toughness-strength relations in the overaged 7449 al-based alloy

N. Kamp, I. Sinclair, M. J. Starink

Publisher page

Abstract

This article examines the relationship between plane strain fracture toughness, K Ic , the tensile properties, and the microstructure of the overaged 7449 aluminum-plate alloy, and compares them to the 7150 alloy. The 7449 alloy has a higher content of η′/η precipitates; and, the 7150 alloy contains a greater amount of coarse intermetallic particles, as it contains an appreciable amount of coarse S phase (Al2CuMg), which is largely absent in the 7449 alloy. The toughness of the alloys shows an increase on overaging, and the 7449 alloy shows a reasonably linear toughness—yield strength relation on extended overaging. Several mechanisms of failure occur: coarse voiding at intermetallics and a combined intergranular/transgranular shear fracture mode, with the former becoming more important as overaging progresses. Drawbacks of existing models for toughness are discussed, and a new model for plane strain fracture toughness, based on the microstructurally dependent work-hardening factor, K A , introduced in Ashby’s theory of work hardening, is developed. This model predicts a linear relation between K Ic and K /0.85 /σ /0.35 , where σ ys is the yield strength, which is consistent with the experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. T.J. Warner, R.A. Shahani, P. Lassince, and G.M. Raynaud: 3rd ASM Conf. on Synthesis, Processing and Modelling of Advanced Materials, Paris, France, June 1997.
2. I.J. Polmear: Light Alloys: Metallurgy of the Light Metals, 3rd ed., Edward Arnold, London, 1995.
3. G.T. Hahn and A.R. Rosenfield: Metall. Trans. A, 1975, vol. 6A, pp. 653–68.10.1007/BF02672285 ↗
4. G.G. Garrett and J.F. Knott: Metall. Trans. A, 1978, vol. 9A, pp. 1187–1201.10.1007/BF02652242 ↗
5. G.T. Hahn and A.R. Rosenfield: Applications Related Phenomena in Titanium Alloys, ASTM STP 432, ASTM, Philadelphia, PA, 1968, pp. 5–32.10.1520/STP33617S ↗
6. C.Q. Chen and J.F. Knott: Met. Sci., 1981, vol. 15, pp. 357–65.10.1016/0036-9748(81)90209-X ↗
7. M.J. Starink and P.J. Gregson: Mater. Sci. Eng. A, 1996, vol. 211, pp. 54–65.10.1016/0921-5093(95)10159-4 ↗
8. M.J. Haynes and R.P. Gangloff: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1815–29.10.1007/s11661-997-0112-8 ↗
9. N. Eswara Prasad, S.V. Kamat, K.S. Prasad, and G. Malakondaiah: Eng. Fract. Mech., 1993, vol. 46, pp. 209–23.10.1016/0013-7944(93)90282-W ↗
10. G. LeRoy, J.D. Embury, G. Edward, and M.F. Ashby: Acta Metall., 1981, vol. 29, pp. 1509–22.10.1016/0001-6160(81)90185-1 ↗
11. M.F. Ashby: in Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., Elsevier, Amsterdam, The Netherlands, 1971, p. 137.
12. M.F. Ashby: Phil. Mag., 1966, vol. 14, pp. 1157–78.10.1080/14786436608224282 ↗
13. P. Gomiero, Y. Brechet, F. Louchet, A. Tourabi, and B. Wack: Acta Metall. Mater., 1992, vol. 40, pp. 857–61.10.1016/0956-7151(92)90028-D ↗
14. M.J. Starink, P. Wang, I. Sinclair, and P.J. Gregson: Acta Mater., 1999, vol. 47, pp. 3855–68.10.1016/S1359-6454(99)00228-1 ↗
15. J.W. Hutchinson: Proc. R. Soc. London A, 1970, vol. 319, pp. 247–72.10.1098/rspa.1970.0177 ↗
16. B. Morere, J.-C. Ehrstrom, P.J. Gregson, and I. Sinclair: Metall. Mater. Trans. A., 2000, vol. 31A, pp. 2503–15.10.1007/s11661-000-0195-y ↗
17. G. Lapasset and C. Renon: Recherche Aérospatiale, 1982, vol. 5, pp. 313–26.
18. X. Li and M.J. Starink: Mater. Sci. Forum, 2000, vol. 331, pp. 1071–76.10.4028/www.scientific.net/MSF.331-337.1071 ↗
19. R. DeIasi and P.N. Adler: Metall. Trans. A, 1977, vol. 8A, pp. 1177–83.
20. A. Deschamps, F. Livet, and Y. Bréchet: Acta Mater., 1999, vol. 47, pp. 281–92.10.1016/S1359-6454(98)00293-6 ↗
21. J.M. Papazian: Metall. Trans. A, 1982, vol. 13A, pp. 761–69.10.1007/BF02642389 ↗
22. A.J. Morris, R.F. Robey, P.D. Couch, and E. De Ios Rios: Mater. Sci. Forum, 1997, vol. 242, pp. 181–86.10.4028/www.scientific.net/MSF.242.181 ↗
23. G.M. Ludtka and D.E. Laughlin: Metall. Trans. A, 1982, vol. 13A, pp. 411–25.10.1007/BF02643350 ↗
24. A.K. Vasudevan and R.D. Doherty: Acta Metall., 1987, vol. 35, pp. 1193–1219.10.1016/0001-6160(87)90001-0 ↗
25. I. Kirman: Metall. Trans., 1971, vol. 2, pp. 1761–70.10.1007/BF02913403 ↗
26. J. Yeh and K. Liu: Scripta Metall., 1986, vol. 20, pp. 329–34.10.1016/0036-9748(86)90152-3 ↗
27. M.R. Jarrett and J.S. Compton: Proc. Conf. on Extrusion of Hard Alloys, Associazione Italiana di Metallurgia, Milan, Italy, 1991.
28. X. Li and M.J. Starink: Mater. Sci. Technol., 2001, vol. 17, pp. 1324–28.10.1179/026708301773002482 ↗
29. E. Hornbogen and M. Graf: Acta Metall., 1977, vol. 25, pp. 877–81.10.1016/0001-6160(77)90173-0 ↗
30. A.M. Gokhale, N.U. Deshpande, D.K. Denzer, and J. Liu: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1203–10.10.1007/s11661-998-0247-2 ↗