journal article·2007-11

Improved Pulse Shaping to Achieve Constant Strain Rate and Stress Equilibrium in Split-Hopkinson Pressure Bar Testing

Kenneth S. Vecchio, Fengchun Jiang

Publisher page

Abstract

Assuring a constant strain rate during dynamic testing is highly desirable to support the development of physically based predictive, constitutive material models. Many dynamic tests conducted on high-work-hardening materials, or materials that do not display a classic power-law-type hardening behavior, such as materials exhibiting complex sigmoidal concave-upward hardening (shape-memory alloys or a number of textured hexagonal metals due to deformation twinning), often result in continuously decreasing strain rates as a function of strain throughout the test. Incident pulse shaping has not been fully developed or successfully demonstrated over a large range of strain in high work hardening or complex-hardening materials. To shape an incident pulse for a constant strain rate in a split-Hopkinson pressure bar (SHPB) test, a high-strength, high-work-hardening rate (HSHWHR) material was selected to fabricate the pulse shaper. Several test sample materials, namely, 50-50 NiTi superelastic alloy, higher strength 60NiTi alloy, tungsten single crystals, interstitial-free (IF) steel, and MACOR (a glassy ceramic), which display a range of strength levels, work-hardening rates, and superelastic hardening behavior in the case of 50-50 NiTi, were tested in the SHPB with and without a pulse shaper at different temperatures and strain rates. The current experiments demonstrate that HSHWHR pulse-shaper materials are ideally suited to shape the incident pulse to achieve constant strain rates and achieve stress state equilibrium, while inherently dampening high frequency oscillations in the incident pulse.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · High-pressure geophysics and materials · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. W. Chen, B. Song, D.J. Frew, M.J. Forrestal: Exper. Mech., 2003, vol. 43, pp. 20–2310.1007/BF02410479 ↗
2. D.J. Parry, A.G. Walker, P.R. Dixon: Measurement Sci. Technol., 1995, vol. 6, pp. 443–4610.1088/0957-0233/6/5/001 ↗
3. S. Ellwood, L.J. Griffiths, D.J. Parry: J. Phys. E: Sci. Instrum., 1982, vol. 15, pp. 280–8210.1088/0022-3735/15/3/009 ↗
4. S. Nemat-Nasser et al.: J. Eng. Mater. Technol., 2005, vol. 127, pp. 83–8910.1115/1.1839215 ↗
5. J. Duffy, J.D. Campbell, R.H. Hawley: J. Appl. Mech., 1971, vol. 37, pp. 83–9110.1115/1.3408771 ↗
6. G.T. Gray: ASM Handbook, vol. 8, Mechanical Testing and Evaluation, ASM INTERNATIONAL, Materials Park, OH, 2000, pp. 462–76
7. C.E. Franz, P.S. Follanbee, and W.J. Wright: 8th Int. Conf. on High Energy Rate Fabrication, Pressure Vessel and Piping Division, San Antonio, TX, 1984, I. Beaman and J.W. Schroeder, eds., ASME, 1984
8. P.S. Follanbee: Metals Handbook, vol. 8, Mechanical Testing, 9th ed., ASM, Metals Park, OH, 1985, pp. 198–217
9. S. Nemat-Nasser, J.B. Isaacs, J.E. Starrett: Proc. R. Soc. London A, 1991, vol. 435, pp. 371–9110.1098/rspa.1991.0150 ↗
10. D.J. Frew, M.J. Forrestal, W. Chen: Exper. Mech., 2002, vol. 42, pp. 93–10610.1007/BF02411056 ↗
11. D.J. Frew, M.J. Forrestal, W. Chen: Exper. Mech., 2001, vol. 41, pp. 40–4610.1007/BF02323102 ↗
12. W. Chen, F. Lu, N. Winfree: Exper. Mech., 2002, vol. 42, pp. 65–7310.1007/BF02411053 ↗
13. W. Chen, B. Zhang, M.J. Forrestal: Exper. Mech., 1999, vol. 39, pp. 81–8510.1007/BF02331109 ↗
14. T.C. Togami, W.E. Baker, M.J. Forrestal: J. Appl. Mech., 1996, vol. 63, pp. 353–5610.1115/1.2788872 ↗
15. L. Ninan, J. Tsai, C.T. Sun: Int. J. Impact Eng., 2001, vol. 25, pp. 291–31310.1016/S0734-743X(00)00039-7 ↗
16. Raghavendra R. Adharapurapu, Fengchun Jiang, Kenneth S. Vecchio, and George T. Gray, III: Acta Mater., 2006, vol. 54, pp. 4609–2010.1016/j.actamat.2006.05.047 ↗
17. Weinong W. Chen, Qiuping Wu, Joseph H. Kang, and Nancy A. Winfree: Int. J. Solids Struct., 2001, vol. 38, pp. 8989–9810.1016/S0020-7683(01)00165-2 ↗
18. G. Ravichandran, G. Subhash: J. Am. Ceram. Soc., 1994, vol. 77, pp. 263–6710.1111/j.1151-2916.1994.tb06987.x ↗
19. Metals Handbook, 9th ed., Howard E. Boyer and Timothy L. Gall, eds., ASM, Metals Park, OH, 1985, pp. 190–207.
20. A.M. Bragoy, A.K. Lomunov: Int. J. Impact Eng., 1995, vol. 16, pp. 321–3010.1016/0734-743X(95)93939-G ↗