journal article·2001-10

Effects of heating rate on densification and grain growth during field-assisted sintering of α-Al2O3 and MoSi2 powders

L. A. Stanciu, V. Y. Kodash, J. R. Groza

Publisher page

Abstract

Two types of powders, electrically conductive MoSi2 and insulating α-Al2O3, were sintered by a field-assisted sintering technique (FAST) using heating rates from 50 °C to 700 °C/min. The Al2O3 powders were sintered to 99 pct density at 1100 °C for 2 minutes under 45 Mpa pressure. For Al2O3, no exaggerated grain growth was observed and the final grain size inversely scaled with the heating rate. Such a grain growth behavior fits the literature models based on multiple transport mechanisms for constant-heating-rate sintering. The density reached by MoSi2 under similar sintering conditions was 91 pct. The grain size was independent of the heating-rate value. Specific electrical field and pressure effects are shown to contribute to enhanced densification and minimal coarsening in each material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. D.L. Johnson: in Advanced Ceramics II, S. Somiya, ed., Elsevier Applied Science, London, 1987, pp. 1–6.
2. R.L. Coble and T.K. Gupta: in Sintering and Related Phenomena, G.C. Kuczynski, N.A. Hooton, and C.F. Gibbon, eds., Gordon Breach Science Publisher Inc., New York, NY, 1967, pp. 423–44.
3. M. Harmer, W.W. Roberts, and R.J. Brook: Trans J. Br. Ceram. Soc., 1979, vol. 78, pp. 22–25.
4. R.J. Brook: Proc. Br. Ceram. Soc. 1982, vol. 32, pp. 7–24.
5. M.Y. Chu, M.N. Rahaman, and L.C. De Jonghe: J. Am. Ceram. Soc., 1991, vol. 74, pp. 1217–25.10.1111/j.1151-2916.1991.tb04090.x ↗
6. D. Dadon, L.P. Martin, M. Rosen, A. Birman, D. Gershon, J.P. Calame, B. Levush, and Y. Carmel: J. Mater. Synthesis Processing, vol. 4, 1996, pp. 95–103.
7. J.R. Groza: ASM Handbook, [1998, vol. 7,] Powder Metal Technology and Applications, Metals Park, OH, pp. 583–87.
8. J.R. Groza, S.H. Risbud, and K. Yamazaki: J. Mater. Res., 1992, vol. 7, pp. 2643–45.10.1557/JMR.1992.2643 ↗
9. J.R. Groza, J.D. Curtis, and M. Krämer: J. Am. Ceram. Soc., 2000, vol. 83 (5), pp. 1281–83.10.1111/j.1151-2916.2000.tb01369.x ↗
10. K.R. Anderson, J.R. Groza, M. Fendorf, and C.J. Echer: Mater. Sci. Eng., 1999, vol. A270, pp. 278–82.10.1016/S0921-5093(99)00197-5 ↗
11. J.R. Groza and J. Oakes: Adv. Powder Metall. Particulate Mater., 1997, vol. 12, pp. 12–51.
12. J.M. Doh, J.R. Groza, and J. Oakes: Adv. Powder Metall. Particulate Mater., 1998, vol. 1, pp. 105–14.
13. B. Bhattacharyya, D.M. Bylander, and L. Kleineman: Phys. Rev. B, 1985, vol. 32, pp. 7973–78.10.1103/PhysRevB.32.7973 ↗
14. V.S. Neshpor and G.V. Samsonov: Poroshkovaya Metallurgiya, 1962, vol. 6, pp. 14–19.
15. P.S. Kisly, M.A. Kyzenkova, V.G. Kayuk, and O.V. Pshenichnaya: in High Temperature Borides and Silicides, T.Y. Kosolapova, ed., Naukova Dumka, Kiev, 1978, pp. 104–08.
16. M.F. Ashby: HIP 6.1 Software for Constructing Maps for Sintering and Hot Isostatic Pressing, Cambridge University, Cambridge, United Kingdom, 1990.
17. R. Suryanarayanana and S.M.L. Sastry: Acta Mater., 1999, vol. 47, pp. 3079–98.10.1016/S1359-6454(99)00116-0 ↗
18. R. Suryanarayanana, S.M.L. Sastry, and K.L. Jerina: Acta Mater., 1994, vol. 42, pp. 3741–50.10.1016/0956-7151(94)90439-1 ↗
19. S.H. Hillman and R.M. German: J. Mater. Sci., 1992, vol. 27, pp. 2641–48.10.1007/BF00540683 ↗
20. S.W. Wang, L.D. Chen, and T. Hirai: J. Mater. Res., 2000, vol. 15, pp. 982–87.10.1557/JMR.2000.0140 ↗
21. J.R. Groza and A. Zavaliangos: Mater. Sci. Eng., 2000, vol. A287, pp. 171–77.10.1016/S0921-5093(00)00771-1 ↗
22. A.I. Raichenko: “Fundamental Processes in Powder Sintering,” Metalurgyia, Moscow, 1987, pp. 11–14.