Microstructural and mechanical properties investigation of electrodeposited and annealed LIGA nickel structures
Source abstract
Abstract
Lithographic, Galvanoformung, Abformung (LIGA) component fabrication is a process in which structural material is deposited into a patterned polymethyl-methacrylate (PMMA) mold realized through deep X-ray lithography. The process permits fabrication of metal microelectrome chanical systems (MEMS) components with representative dimensions that range from a few microns to several millimeters. This investigation characterizes the microstructure and mechanical properties of LIGA-fabricated nickel (LIGA Ni), electrodeposited using Watts bath and sulfamate bath chemistries. As a prelude to studying high-temperature joining processes in LIGA Ni components, an annealing investigation was conducted on samples fabricated from both bath chemistries. Mechanical properties and microstructural analyses on as-deposited and annealed samples were conducted using a mini servohydraulic load frame and the electron backscatter diffraction (EBSD) microtexture measurement technique. The deposits were found to have fine-grain, highly textured microstructures oriented with an acicular or columnar morphology relative to the plating direction. Previously uncharacterized, anomalous, local spatial variations in the crystallographic texture of the as-deposited microstructures were identified by EBSD analyses. Microstructural evolution during annealing seemed to follow a recovery, recrystallization, rapid grain-growth microstructural-evolution mechanism in LIGA Ni deposited from the Sulfamate bath chemistry and simply a recovery and grain-growth microstructural-evolution mechanism in LIGA Ni deposited from the Watts bath chemistry. The evolution of microstructure in the annealed samples corresponded with a dramatic drop in their strength and determined the limiting diffusion-bonding temperature for LIGA Ni components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Electronic Packaging and Soldering Technologies · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. E.W. Becker, W. Ehrfeld, P. Hagmann, A. Maner, and D. Munchmeyer: Microelectr. Eng., 1986, vol. 4, pp. 35–56.10.1016/0167-9317(86)90004-3 ↗
2. W. Bacher, W. Menz, and J. Mohr: IEEE Trans. Ind. Electr., 1995, vol. 42 (5), pp. 431–41.10.1109/41.464604 ↗
3. J. Mohr: Sensors Materials, 1998, vol. 10 (6), pp. 363–73.
4. M. Polosky, T.R. Christenson, A.A. Jojola, and D.W. Plummer: Book of Abstracts, 3rd Int. Workshop on High Aspect Ratio Microstructure Technology (HARMST ’99). Kisarazu, Japan, 1999, pp. 144–45.
5. T.R. Christenson, T.E. Buchheit, and D.T. Schmale: Materials Science of Microelectromechanical Systems (MEMS) Devices, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1999, vol. 546, pp. 127–31.
6. T.R. Christenson and H. Guckel: Micromachining and Microfabrication Technology, SPIE Proc., 1995, vol. 2639, pp. 134–45.10.1117/12.221271 ↗
7. T.E. Buchheit, T.R. Christenson, D.T. Schmale, and D.A. LaVan: Materials Science of Microelectromechanical Systems Devices, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1998, vol. 546, pp. 121–26.
8. V. Landa, J. Vitek, and J. Neumann: Plating Surface Finishing, 1987, vol. 68, pp. 128–33.
9. W.H. Safranek: The Properties of Electrodeposited Metals and Alloys, A Handbook, 2nd ed., American Electroplaters Society, Orlando, FL, 1986.
10. S.D. Leith and D.T. Schwartz: J. Microelectromech. Sys., 1999, vol. 8 (4), pp. 384–92.10.1109/84.809052 ↗
11. J.W. Dini: Electrodeposition, The Materials Science of Coatings and Substrates, Noyes Publications, Park Ridge, NJ, 1993.
12. J. Amblard, I. Epelboin, M. Froment, and G. Maurin: J. Appl. Electrochem., 1979, vol. 9, pp. 233–42.10.1007/BF00616093 ↗
13. C. Kollia, N. Spryrellis, J. Amblard, M. Froment, and G. Maurin: J. Appl. Electrochem., 1990, vol. 20, pp. 1025–32.10.1007/BF01019584 ↗
14. C. Bergenstef-Nielsen, A. Horsewell, and M.T.L. Ostergard: J. Appl. Electrochem., 1997, vol. 27, pp. 839–45.10.1023/A:1018429013660 ↗
15. C.B. Sanborn: Symp. on Electrodeposited Metals as Materials for Selected Applications, MCIC-72-05, AFSC, Wright-Patterson AFB, OH, 1972, pp. 65–81.
16. Metals Handbook: Desk Edition, H.E. Boyer and T.L. Gall, eds., ASM, Metals Park, OH, 1985, ch. 15.
17. R. Weil: Ann. Rev. Mater. Sci., 1989, vol. 19, pp. 165–82.10.1146/annurev.matsci.19.1.165 ↗
18. S.W. Banovic, K. Barmak, and A.R. Marder: J. Mater. Sci., 1998, vol. 33, pp. 639–43.10.1023/A:1004321224586 ↗
19. H.R. Johnson, J.W. Dini, and R.E. Stoltz: Plating Surf. Finishing, 1979, vol. 66, pp. 57–62.
20. T. Tsuchiya, O. Tabata, J. Sakata, and Y. Taga: IEEE Proc. 10th Annual Int. Workshop on Microelectromechanical Systems, Nagoya, Japan, 1997, IEEE Society, Piscataway, NJ, pp. 529–34.
21. W.N. Sharpe, B. Yuan, R. Vaidyanathan, and R.L. Edwards: IEEE Proc. 10th Annual Int. Workshop on Microelectromechanical Systems, 1997, pp. 424–29.10.1109/MEMSYS.1997.581881 ↗
22. W.N. Sharpe, D.L. LaVan, and R.L. Edwards: Int. Conf. on Solid-State Sensors and Actuators, Chicago, IL, 1997, pp. 607–10.
23. S. Greek and F. Ericson: Mater Res. Soc. Symp. Proc., 1998, vol. 518, pp. 51–56.10.1557/PROC-518-51 ↗
24. D.A. LaVan and T.E. Buchheit: Materials Science of Microelectromechanical System (MEMS) Devices, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1999, vol. 546, 1999, p. 121.
25. T.R. Christenson, T.E. Buchheit, D.T. Schmale, and R.J. Bourcier: Microelectromechanical Structures for Materials Research, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1998, vol. 518, pp. 185–90.
26. B.E. Jacobson and J.W. Sliwa: Plating Surf. Finishing, 1979, vol. 60 (9), pp. 42–47.
27. Electron Backscatter Diffraction in Materials Science, A.J. Schwartz, M. Kumar, and B.L. Adams, eds., Kluwer/Academic Press, New York, NY, 2000.
28. H.R. Last, R. Witt, and K.J. Hemker: Microelectromechanical Structures for Materials Research, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, vol. 605, 2002, pp. 197–202.
29. J. Don and S. Majundar: Acta Metall., vol. 34, p. 961, 1986.10.1016/0001-6160(86)90069-6 ↗
30. G. Palumbo, K.T. Aust, U. Erb, P.J. King, A.M. Brennenstohl, and P.C. Lichtenberger: Phys. Status Solidi (a), vol. 131, 1992, pp. 425–8.10.1002/pssa.2211310216 ↗
31. V.Y. Gertsmann, K. Tangri, and R.Z. Valiev: Acta Metall. Mater., 1994, vol. 42 (6), pp. 1785–1804.10.1016/0956-7151(94)90004-3 ↗
32. C.K. Malek, H.M. Manohara, and V. Saile: Microsys. Technol., 1997, vol. 4 (1), pp. 2–6.10.1007/s005420050081 ↗
33. J.M. Hruby, M.A. Bankert, T.E. Bennett, D.R. Boehme, W.D. Bonivert, S.K. Griffiths, J.T. Hachman, J. Krafcik, Jr., A. Morales, and A. Ting: 3rd Int. Workshop for High Aspect Ratio Microstructures (HARMST), Kisarazu, Japan, 1999, pp. 46–47.
34. D.T. Schmale, R.J. Bourcier, and T.E. Buchheit: “Description of a Micro-mechanical Testing System” Report No. SAND-97-1608 Sandia National Laboratories, Albuquerque, NM, 1997.10.2172/515567 ↗
35. Keyence Corp. www.keyence.com.
36. S.D. Leith and D.T. Schwartz: J. Microelectromech. Sys., 1999, vol. 8 (4), pp. 384–92.10.1109/84.809052 ↗
37. V.Y. Gertsmann, A.P. Zhilyeav, A.I. Pshenichnyuk, and R.Z. Valiev: Acta Metall., 1991, vol. 40, (6), pp. 1433–41.10.1016/0956-7151(92)90445-K ↗