journal article·2004-11

Formability and strength of friction-stir-welded aluminum sheets

M. P. Miles, T. W. Nelson, B. J. Decker

Publisher page

Abstract

Friction stir welding was investigated as a viable process for joining thin aluminum sheets in order to manufacture tailored blanks. In the present study three alloys were tested: 5182-O, 5754-O, and 6022-T4. All three of these alloys are being used to fabricate stamped automotive parts. The gas tungsten arc welding process has been used to make aluminum-tailored welded blanks industrially, so results using this process were compared to FSW results. Blanks of the same gage of all three alloys were welded and then evaluated using tensile and formability testing. The 5xxx series alloys had similar tensile ductility and formability regardless of the welding process. However, the 6022-T4 sheets joined using friction stir welding had better formability than those joined using gas tungsten arc welding because friction stir welding caused less softening in the heat-affected zone.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. B. Kinsey, V. Viswanathan, and J. Cao: J. Mater. Manufacturing, 2001, vol. 110, Sect. 5, pp. 673–79.
2. R.W. Davies, G.J. Grant, H.E. Oliver, M.A. Khaleel, and M.T. Smith: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 275–83.10.1007/s11661-001-0259-7 ↗
3. T. Pohl: 32nd ISATA Conf., June 14–18, 1999, ISATA, Croyden, Vienna, 1999, pp. 441–49.
4. P.A. Friedman and G.T. Kridli: J. Mater. Eng. Performance, 2000, vol. 9 (5), pp. 541–51.10.1361/105994900770345674 ↗
5. K.K. Bhatt and M. Eisenmenger: SAE Paper No. 950923, SAE, Warrendale, PA, 1995.
6. A. Buste, X. Lalbin, and M.J. Worswick: Proc. Int. Symp. on Light Metals, M. Bouchard and A. Faucher, eds., Canadian Institute of Mining, Metallurgy, and Petroleum, Montreal, 1999, pp. 485–500.
7. P. Martin, R. Zhang, B. Altshuller, M.J. Finn, and M.J. Worswick: Proc. Int. Symp. on Light Metals, M. Sahoo and C. Fradet, eds., Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, 1998, pp. 409–23.
8. M.C. Stasik and R.H. Wagoner: in Aluminum and Magnesium Automotive Applications, J.D Bryant, ed., TMS, Warrendale, PA, 1996, pp. 69–83.
9. F. Herrmann, J. Ebert, M. Hibben, and F. Steimmel: Automation, 1996, vol. 1, pp. 507–16.
10. R.W. Davies, H.E. Oliver, M.T. Smith, and G.J. Grant: J. Met., vol. 51 (11), pp. 46–50.10.1007/s11837-999-0222-4 ↗
11. L.E. Murr, G. Liu, and J.C. McClure: J. Mater. Sci., 1988, vol. 33, pp. 1243–51.10.1023/A:1004385928163 ↗
12. M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, and W.H. Bingel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955–64.10.1007/s11661-998-0021-5 ↗
13. Y.S. Sato, H. Kokawa, M. Enomoto, and S. Jogan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2429–37.10.1007/s11661-999-0251-1 ↗
14. A.K. Ghosh: Met. Eng. Q., 1975, vol. 15 (3), pp. 53–64.
15. M.P Miles, J.L. Siles, R.H. Wagoner, and K. Narasimhan: Metall. Trans. A, 1993, vol. 24A, pp. 1143–51.10.1007/BF02657245 ↗
16. R.H. Wagoner, W. Wang, and S. Sriram: J. Mater. Processing Technol., 1994, vol. 45, pp. 13–18.10.1016/0924-0136(94)90311-5 ↗
17. S.P. Keeler and W.A. Backofen: Trans. ASM, 1963, vol. 56, pp. 25–48.
18. S.P Keeler: SAE Paper No. 650535, SAE, Warrendale, PA, 1956.
19. S.S. Hecker: Sheet Met. Ind., 1975, Nov., pp. 671–76.