In-situ three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast x-ray microtomography
Source abstract
Abstract
This article presents the first results of a new experimental technique developed to investigate the evolution of the morphology of the solid and liquid phases during the solidification of a metallic alloy. It consists of ultrafast X-ray microtomography observations of a solidifying aluminum-copper alloy carried out at ESRF. These experiments allow investigating in-situ the formation of the casting microstructure and of the evolution of the morphology of the solid and the liquid phases. It allows also the in-situ determination of the solidification path, of the variation of the copper content in both the liquid and solid phases, and of some other characteristic parameters of the microstructure. Provided that some forthcoming technical improvements on the experimental setup are performed, more quantitative results can be obtained as well as better image quality and resolution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and mechanical properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. G.K. Sigworth: AFS Trans., 1996, vol. 106, pp. 1053–59.
2. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 449–56.10.1007/s11661-999-0334-z ↗
3. M. Rappaz, J.M. Drezet, P.D. Grasso, and A. Jacot: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, J. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 53–60.
4. I. Farup, J.M. Drezet, and M. Rappaz: Acta Mater., 2001, vol. 49, pp. 1261–69.10.1016/S1359-6454(01)00013-1 ↗
5. I. Farup: Ph.D. Thesis, University of Oslo, Oslo, 2000.
6. P.D. Grasso: Ph.D. Thesis, EPF, Lausanne, 2004.
7. R.H. Mathiesen, L. Arnberg, K. Ramsøskar, T. Weitkamp, C. Rau, and A. Snigirev: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 613–23.10.1007/s11663-002-0041-2 ↗
8. R.H. Mathiesen, L. Arnberg, F. Mo, T. Weitkamp, and A. Snigirev: Phys. Rev. Lett., 1999, vol. 83, pp. 5062–65.10.1103/PhysRevLett.83.5062 ↗
9. Y. Ito and M.C. Flemings: in Nature and Properties of Semi-Solid Materials, J.A. Sekhar and J. Dantzig, eds., TMS, Warrendale, PA, 1991, pp. 3–17.
10. T.L. Wolfsdorf, W.H. Bender, and P.W. Voorhees: Acta Mater., 1997, vol. 45, pp. 2279–95.10.1016/S1359-6454(96)00338-2 ↗
11. B. Niroumand and K. Xia: Proc. 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, A. Kumar Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Colorado School of Mines, Golden, CO, 1998, pp. 637–44.
12. B. Niroumand and K. Xia: Mater. Sci. Eng., 2000, vol. A283, pp. 70–75.10.1016/S0921-5093(00)00619-5 ↗
13. J. Alkemper and P.W. Voorhees: Acta Mater., 2001, vol. 49, pp. 897–902.10.1016/S1359-6454(00)00355-4 ↗
14. J. Alkemper and P.W. Voorhees: J. Microsc., 2001, vol. 201, pp. 388–94.10.1046/j.1365-2818.2001.00832.x ↗
15. J. Alkemper, R. Mendoza, and P.W. Voorhees: Adv. Eng. Mater., 2002, vol. 4, pp. 694–97.10.1002/1527-2648(20020916)4:9<694::AID-ADEM694>3.0.CO;2-M ↗
16. S. Verrier, M. Braccini, C. Josserond, L. Salvo, M. Suéry, P. Cloetens, and W. Ludwig: Proc. 6th Int. Conf. on Semi-Solid Processing of Alloys and Composites, G.L. Chiarmetta and M. Rosso, eds., Edimet Spa, Brescia, 2000, pp. 771–76.
17. L. Salvo, M. Suéry, C. Josserond, P. Cloetens, and O. Nielsen: Proc. 7th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Y. Tsutsui, M. Kiuchi, and K. Ichiwaka, eds., 2002, pp. 403–08.
18. L. Salvo, P. Cloetens, E. Maire, S. Zabler, J.J. Blandin, J.Y. Buffière, W. Ludwig, E. Boller, D. Bellet, and C. Josserond: Nucl. Instrum. Methods Phys. Res. B, 2003, vol. 200, pp. 273–86.10.1016/S0168-583X(02)01689-0 ↗
19. O. Lame, D. Bellet, M. DiMichiel, and D. Bouvard: Nucl. Instrum. Methods Phys. Res. B, 2003, vol. 200, pp. 287–94.10.1016/S0168-583X(02)01690-7 ↗
20. P. Falus, M. DiMichiel, O. Ludwig, L. Salvo, and M. Suéry: Proc. 8th Int. Conf. on Semi Solid Processing of Alloys and Composites, Limassol, Sept. 21–23, 2004. Published as CD-ROM by NADCA.
21. X.G. Chen and J. Langlais: Mater. Sci. Forum, 2000, vols. 331–333, pp. 215–21.10.4028/www.scientific.net/MSF.331-337.215 ↗
22. I. Ohnaka: Trans. Iron Steel Inst. Jpn., 1986, vol. 26, pp. 1045–51.10.2355/isijinternational1966.26.1045 ↗
23. H.B. Dong, M.R.M. Shin, E.C. Kurum, H. Cama, and J.D. Hunt: Fluid Phase Equilibria, 2003, vol. 212, pp. 199–208.10.1016/S0378-3812(03)00257-7 ↗
24. S. Steinbach and L. Ratke: Scripta Mater., 2004, vol. 50, pp. 1135–38.10.1016/j.scriptamat.2004.01.023 ↗
25. P.M. Smith, J.W. Elmerand, and G.F. Gallegos: Scripta Mater., 1999, vol. 40, pp. 937–41.10.1016/S1359-6462(99)00043-3 ↗
26. H. Yin and J.N. Koster: J. Alloys Compounds, 2000, vol. 352, pp. 175–89.10.1016/S0925-8388(02)01123-4 ↗
27. S.G.R. Brown, J.A. Spittle, D.J. Jarvis, and R. Walden-Bevan: Acta Mater., 2002, vol. 15, pp. 4383–4400.
28. P. Falus, M.A. Borthwick, and S.G.J. Mochrie: Rev. Scientific Instrum., 2004, vol. 75, pp. 4383–4400.10.1063/1.1808913 ↗
29. M. Rappaz, A. Jacot, and W.J. Boettinger: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 467–79.10.1007/s11661-003-0083-3 ↗
30. C. Sigli, L. Maenner, C. Sztur, and R. Shahani: Proc. 6th Int. Conf. on Alluminum Alloys, T. Sato, S. Kumai, T. Kobayashi, and Y. Yurakami, eds., The Japan Institute of Light Metals, Sendai, 1998, pp. 87–98.
31. L.F. Mondolfo: Aluminum Alloys, Structure and Properties, Butterworth & Co. (Publishers) Ltd., London, 1976, p. 255.
32. M. Bornert, P. Doumalin, and E. Maire: Proc. Photomécanique 2004, Y. Berthaud, P. Gaborit, M. Grédiac, J.J. Orteu, L. Robert, and T. Sentenac, eds., Ecole des Mines d’Albi-Carmaux, Carmaux, 2004, pp. 33–40.
33. W.E. Lorensen and H.E. Cline: Computer Graphics, 1992, vol. 21, pp 163–69.10.1145/37402.37422 ↗
34. A.N. Kolmogorov: Bull. Acad. Sci. USSR, Phys. Ser., 1937, vol. 1, pp. 355–59.
35. W.A. Johnson and P.A. Mehl: Trans. Am. Inst. Min. Metall. Eng., 1939, vol. 135, pp. 416–42.
36. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103–12; 1940, vol. 8, pp. 212–24; 1941, vol. 9, pp. 177–84.10.1063/1.1750380 ↗
37. C. Charbon, A. Jacot, and M. Rappaz: Acta Metall. Mater., 1994, vol. 42, pp. 3953–66.10.1016/0956-7151(94)90173-2 ↗
38. C. Charbon and M. Rappaz: Modelling Simul. Mater. Sci. Eng., 1993, vol. 1, pp. 455–66.10.1088/0965-0393/1/4/009 ↗
39. J.W. Cahn: Trans. TMS-AIME, 1967, vol. 239, pp. 610–16.