journal article·2007-12

Extrusion Limits of Magnesium Alloys

Dale L. Atwell, Matthew R. Barnett

Publisher page

Abstract

Magnesium alloys are generally found to be slower to extrude than aluminum alloys; however, limited quantitative comparisons of the actual operating windows have been published. In this work, the extrusion limits are determined for a series of commercial magnesium alloys (M1, ZM21, AZ31, AZ61, and ZK60). These are compared with the limits established for aluminum alloy AA6063. The maximum extrusion speed of alloy M1 is shown to be similar to AA6063. Alloys ZM21, AZ31, ZK60, and AZ61 exhibit maximum extrusion speeds 44, 18, 4, and 3 pct, respectively, of the maximum measured for AA6063. For AZ31, the maximum extrusion speed is increased by 22 pct after homogenization and by 64 pct for repeat extrusions. The variation in the extrusion limits with changing alloy content is rationalized in terms of differences in the hot working flow stress and solidus temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. F.E. Katrak, J.C. Agarwal, F.C. Brown, M. Loreth, and D.L. Chin: Magnesium Technology, Nashville, TN, Mar. 12–16, 2000, H.I. Kaplan, J.N. Hryn, and B.B. Clow, eds., TMS, Warrendale, Pennsylvania, pp. 351–54
2. K. Savage and J.K. King: DGM Conf. Magnesium Alloys and Their Applications, Munich, Sept. 26–28, 2000, K.U. Kainer, ed., Wiley-VCH, Weinheim, Germany, pp. 609–1410.1002/3527607552.ch96 ↗
3. W.H. Sillekens, J.A.F.M. Schade van Westrum, A.J. den Bakker, and P.-J. Vet: Processing & Manufacturing of Advanced Materials, Leganés, Madrid, July 7–11, 2003, T. Chandra, J.M. Torralba, and T. Sakai, eds., Trans Tech Publications, Uetikon-Zurich, Switzerland, pp. 629–3610.4028/www.scientific.net/MSF.426-432.629 ↗
4. J. Swiostek, J. Bohlen, D. Letzig, and K.U. Kainer: 6th DGM Conf. “Magnesium Alloys and Their Applications,” Weinheim, Germany, 2004, K.U. Kainer, ed., Wiley-VCH, Weinheim, Germany, pp. 278–8410.1002/3527603565.ch43 ↗
5. J. Bohlen, J. Swiostek, W.H. Sillekens, P.-J. Vet, D. Letzig, and K.U. Kainer: Magnesium Technology, San Francisco, CA, Feb. 13–17, 2005, N.R. Neelameggham, H.I. Kaplan, and B.R. Powell, eds., TMS, Warrendale, Pennsylvania, pp. 241–46
6. J. Swiostek, J. Bohlen, D. Letzig, and K.U. Kainer: Magnesium—Science, Technology and Applications, Beijing, Sept. 20–24, 2004, Y.-W. Mai, G.E. Murch, and F.H. Wohlbier, eds., Trans Tech Publications, Uetikon-Zurich, Switzerland, pp. 491–9410.4028/0-87849-968-7.491 ↗
7. K.B. Mueller: Magnesium Technology, Seattle, WA, Feb. 17–21, 2002, H.I. Kaplan, ed., TMS, Warrendale, Pennsylvania, pp. 187–92
8. W. H. Sillekens: Light Metals Technology, St. Wolfgang, Austria, June 8–10, 2005, H. Kaufmann, ed., LKR, Ranshofen, Austria, pp. 137–42
9. T. Sheppard: Extrusion of Aluminium Alloys, Kluwer Academic Publishers, Dordrecht, 1999, p. 42010.1007/978-1-4757-3001-2 ↗
10. M.G. Tutcher, T. Sheppard: Met. Technol., 1980, vol. 7 (12), pp. 488–9310.1179/030716980803286982 ↗
11. B.J. Meadows, M.J. Cutler: J. Inst. Met., 1969, vol. 97, pp. 321–26
12. T. Sheppard, P.J. Tunnicliffe, S.J. Patterson: J. Mech. Working Technol., 1982, vol. 6 (4), pp. 313–3110.1016/0378-3804(82)90031-6 ↗
13. T. Sheppard: Mater. Sci. Technol., 1993, vol. 9, pp. 430–4010.1179/mst.1993.9.5.430 ↗
14. M.P. Clode, T. Sheppard: Mater. Sci. Technol., 1993, vol. 9, pp. 313–1810.1179/mst.1993.9.4.313 ↗
15. M.R. Barnett, D. Atwell, C. Davies, and R. Schmidt: Light Metals Technology, St. Wolfgang, Austria, June 8–10, 2005, H. Kaufmann, ed., LKR, Ranshofen, Austria, pp. 161–66
16. M.R. Barnett, J.-Y. Yao, and C. Davies: Light Metals Technology, Brisbane, Australia, Sept. 18–20, 2003, A.K. Dahle, ed., CAST, Brisbane, Australia, pp. 333–38
17. R.Y. Lapovok, M.R. Barnett, C.H.J. Davies: J. Mater. Process. Technol., 2004, vol. 146 (3), pp. 408–1410.1016/j.jmatprotec.2003.12.003 ↗
18. T. Murai, S.-I. Matsuoka, S. Miyamoto, and Y. Oki: Mater. Sci. Forum., 2003, vol. 419–22, pp. 349–5410.4028/www.scientific.net/MSF.419-422.349 ↗
19. T. Murai, S.-I. Matsuoka, S. Miyamoto, Y. Oki, S. Nagao, H. Sano: J. Jpn. Inst. Light Met., 2003, vol. 53 (1), pp. 27–3110.2464/jilm.53.27 ↗
20. T. Murai, H. Oguri, and S.-I. Matsuoka: Magnesium—Science, Technology and Applications, Beijing, China, Sept. 20–24, 2004, Y.-W. Mai, G.E. Murch, and F.H. Wohlbier, eds., Trans Tech Publications, Uetikon-Zurich, Switzerland, pp. 515–1810.4028/0-87849-968-7.515 ↗
21. J.P. Doan, G. Ansel: AIME, 1947, vol. 171, pp. 286–305
22. W.H. Sillekens and J. Bohlen: 6th DGM Conf. “Magnesium Alloys and their Applications,” Weinheim, Germany, 2004, K.U. Kainer, ed., Wiley-VCH, Weinheim, Germany, pp. 1046–51
23. A.J.D. Bakker, W.H. Sillekens, J. Bohlen, K.U. Kainer, and G. Barton: 6th DGM Conf. “Magnesium Alloys and their Applications,” Weinheim, Germany, 2004, K.U. Kainer, ed., Wiley-VCH, Weinheim, Germany, pp. 324–3010.1002/3527603565.ch50 ↗
24. C. Jaschik (Sp), H. Haferkamp, and M. Niemeyer: DGM Conf. “Magnesium Alloys and Their Applications,” Munich, Sept. 26–28, 2000, K.U. Kainer, ed., Wiley-VCH, Weinheim, Germany, pp. 41–4610.1002/3527607552.ch7 ↗
25. J.-F. Lass, F.-W. Bach, and M. Schaper: Magnesium Technology, San Francisco, CA, Feb. 13–17, 2005, N.R. Neelameggham, H.I. Kaplan, and B.R. Powell, eds., TMS, Warrendale, Pennsylvania, pp. 159–64
26. Y. Birol: J. Mater. Process. Technol., 2004, vol. 148 (2), pp. 250–5810.1016/j.jmatprotec.2004.01.056 ↗
27. S.S. Vagarali, T.G. Langdon: Acta Metall., 1981, vol. 29 (12), pp. 1969–8210.1016/0001-6160(81)90034-1 ↗
28. P.G. Shewmon, F.N. Rhines: J. Met. (AIME), 1954, vol. 200, pp. 1021–25
29. A. Galiyev, R. Kaibyshev, G. Gottstein: Acta Mater., 2001, vol. 49 (7), pp. 1199–120710.1016/S1359-6454(01)00020-9 ↗
30. A.G. Beer and M.R. Barnett: Magnesium Technology, Seattle, WA, Feb. 17–21, 2002, H.I. Kaplan, ed., TMS, Warrendale, Pennsylvania, pp. 193–98
31. A.G. Beer: Ph.D. Thesis, Deakin University, Geelong, 2004, p. 220