Softening Kinetics in the Subcritical Heat-Affected Zone of Dual-Phase Steel Welds
Source abstract
Abstract
Welds in dual-phase (DP) steels exhibit heat-affected zone (HAZ) softening in which the tempered or subcritical HAZ exhibits a lower hardness vs that of the parent material. The rate of this softening reaction with respect to welding heat input was determined for four DP steels by making several bead-on-plate laser welds using a variety of heat inputs and measuring the resulting minimum hardness. The reduction in hardness was then fit to the Avrami equation, enabling a comparison of the relative heat needed to soften each steel. It was found that the heat input required for HAZ softening decreased as the C content of the martensite within the DP structure increased. However, the presence of carbide forming alloying elements such as Cr and Mo was able to increase resistance to softening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Federal Register, 2009, vol. 74, pp. 49454–789.
2. W. Gan, S.S. Babu, N. Kapustaka, and R.H. Wagoner: Metall. Mater. Trans A, 2006, vol. 37A, pp. 3221–31.10.1007/BF02586157 ↗
3. S. Hashimoto, S. Kanbe, and M. Sudo: Trans. ISIJ, 1981, vol. 21, pp. B-497.
4. N. Yamauchi, T. Taka, K. Kunishige, and N. Nagao: Trans. ISIJ, 1982, vol. 22, pp. B-107.
5. T. Taka, K. Kunishige, N. Yamauchi, and N. Nagao: ISIJ Int., 1989, vol. 29, pp. 503–10.10.2355/isijinternational.29.503 ↗
6. E. Biro and A. Lee: Sheet Metal Welding Conference XII, AWS, Livonia, MI, 2006.
7. P.K. Ghosh, P.C. Gupta, Ramavtar, and B.K. Jha: Weld. J., 1991, vol. 70, pp. 7s–14s.
8. M. Xia, E. Biro, Z. Tian, and Y.N. Zhou: ISIJ Int., 2008, vol. 48, pp. 809–14.10.2355/isijinternational.48.809 ↗
9. E. Biro and A. Lee: Sheet Metal Welding Conference XI, AWS, Sterling Heights, MI, 2006.
10. P.K. Ghosh, P.C. Gupta, O.M. Pal, R. Avtar, B.K. Jha, and V.S. Dwivedi: ISIJ Int., 1993, vol. 33, pp. 807–15.10.2355/isijinternational.33.807 ↗
11. N. Yurioka, H. Suzuki, S. Ohshita, and S. Saito: Weld. J., 1983, vol. 62, pp. 147s-53s.
12. J.C. Ion, K.E. Easterling, and M.F. Ashby: Acta Metall., 1984, vol. 32, pp. 1949–62.10.1016/0001-6160(84)90176-7 ↗
13. K.W. Andrews, D.J. Dyson, and S.R. Keown: Interpretation of Electron Diffraction Patterns, 2nd ed., Plenum Press, New York, NY, 1971, pp. 181–91.
14. M. Jung, S-J Lee, and Y-K Lee: Metall. Mater. Trans. A., 2009, vol. 40A, pp. 551–59.10.1007/s11661-008-9756-2 ↗
15. Y. Wang, S. Denis, B. Appolaire, and P. Archambault: J. Phys. IV France, 2004, vol. 120, pp. 103–10.10.1051/jp4:2004120011 ↗
16. J.W. Christian: The Theory of Transformations in Metals and Alloys, Part I, Equilibrium and General Kinetic Theory, 2nd ed., Pergamon Press, Oxford, UK, 1975, pp. 19–20.
17. E.J. Mittemeijer, A. Van Gent, and P.J. Van der Schaaf: Metall. Trans. A, 1986, vol. 17A, pp. 1441–45.10.1007/BF02650126 ↗
18. M.I. Luppo and J. Overjero-García: Mater. Charact., 1998, vol. 40, pp. 189–96.10.1016/S1044-5803(98)00009-6 ↗
19. C.S. Roberts, B.L. Averbach, and M. Cohen: Trans. AIME, 1953, vol. 45, pp. 576–603.
20. E.C. Bain: Alloying Elements in Steel, 1st ed., ASM, Cleveland, OH, 1939, pp. 146–260.