Influence of severe plastic deformations on secondary phase precipitation in a 6082 Al-Mg-Si alloy
Source abstract
Abstract
The role of severe plastic deformation on the second-phase stability in a 6082 Al-Mg-Si alloy was studied using differential scanning calorimetry (DSC) and transmission electron microscopy (TEM) techniques. The alloy was fully annealed prior to undergoing up to six equal channel angular pressing (ECAP) passes using route C. The Orowan strengthening mechanism was calculated on the basis of TEM inspections for the two hardening second-phase precipitates: Mg2Si and Si. The former had a major tendency to be cut and fragmented by dislocations, while in the latter, a dissolution process was induced by severe plastic deformation. Accordingly, the second-phase Si particles became progressively less effective with increasing deformation (i.e., additional ECAP passes). The increase in hardness with the ECAP passes was mostly due to the grain refining mechanism and to dislocation tangles within the newly formed grains. The expected, though if limited, contribution of second-phase hardening was prevalently accounted for by the Mg2Si particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. A.K. Gupta, D.J. Lloyd, and S.A. Court: Mater. Sci. Eng. A, 2001, vol. 316A (1–2), pp. 11–17.10.1016/S0921-5093(01)01247-3 ↗
2. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998, vol. 46 (11), pp. 3893–3904.10.1016/S1359-6454(98)00059-7 ↗
3. N. Maruyama, R. Uemori, N. Hashimoto, M. Saga, and M. Kikuchi: Scripta Mater., 1997, vol. 36 (1), pp. 89–93.10.1016/S1359-6462(96)00358-2 ↗
4. S.J. Andersen, H.W. Zandbergen, J. Jansen, C. Traeholt, U. Tundal, and O. Reiso: Acta Mater., 1998, vol. 46 (9), pp. 3283–98.10.1016/S1359-6454(97)00493-X ↗
5. M. Murayama and K. Hono: Acta Mater., 1999, vol. 47 (5), pp. 1537–48.10.1016/S1359-6454(99)00033-6 ↗
6. K. Matsuda, S. Tada, S. Ikeno, T. Sato, and A. Kamio: Scripta Mater., 1995, vol. 32 (8), pp. 1175–80.10.1016/0956-716X(95)00121-B ↗
7. S. Li, S. Zhao, M. Pan, D. Zhao, X. Chen, O.M. Barabash, and R.I. Barabash: Mater. Trans. JIM, 1997, vol. 38 (6) pp. 553–60.10.2320/matertrans1989.38.553 ↗
8. K. Matsuda, H. Gamada, K. Fuji, Y. Uteni, T. Sato, A. Kamis, and S. Ikeno: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1161–67.10.1007/s11661-998-0242-7 ↗
9. A. Perovic, D.D. Perovic, G.C. Weatherly, and D.J. Lloyd: Scripta Mater., 1999, vol. 41 (7), pp. 703–08.10.1016/S1359-6462(99)00204-3 ↗
10. M. Van Rooyen, J.A. Sinte Maartensdijk, and E.J. Mittemeijer: Metall. Trans. A, 1988, vol. 19A, pp. 2433–42.10.1007/BF02645471 ↗
11. S. Nebti, D. Hamana, and G. Cizeron: Acta Metall. Mater., 1995, vol. 43 (9), pp. 3583–88.10.1016/0956-7151(95)00023-O ↗
12. R.C. Dorward: Metall. Trans. A, 1973, vol. 4, pp. 507–12.10.1007/BF02648703 ↗
13. M.H. Jacobs: Phil. Mag., 1972, vol. 8 (26), pp. 1–12.10.1080/14786437208221015 ↗
14. T. Moons, P. Ratchev, P. De Smet, B. Verlinder, and P. van Houtte: Scripta Mater., 1996, vol. 35 (8), pp. 939–45.10.1016/1359-6462(96)00244-8 ↗
15. C. Cayron and P.A. Buffat: Acta Mater., 2000, vol. 48 (10), pp. 2639–53.10.1016/S1359-6454(00)00057-4 ↗
16. S.D. Dumolt, D.E. Laughlin, and J.C. Williams: Scripta Mater., 1984, vol. 18 (12), pp. 1347–50.10.1016/0036-9748(84)90362-4 ↗
17. M. Bournane, M. Nedjar, and A.F. Sirenko: Scipta Mater., 1999, vol. 40 (3), pp. 375–82.10.1016/S1359-6462(98)00397-2 ↗
18. I.J. Polmear: Light Alloys. Metallurgy of the Light Metals, Edward Arnold, London, 1981.
19. M. Furukawa, U. Utsunomiya, K. Matsubara, Z. Horita, and T.G. Langdon: Acta Mater., 2001, vol. 49 (18), pp. 3829–38.10.1016/S1359-6454(01)00262-2 ↗
20. M. Qian, J.A. Taylor, J.Y. Yao, M.J. Couper, and D.H. StJohn: J. Light Met., 2001, vol. 1 (3), pp. 187–93.10.1016/S1471-5317(01)00012-8 ↗
21. S.B. Kang, L. Zhen, H.W. Kim, and S.T. Lee: Mater. Sci. Forum, 1996, vols. 217–222, pp. 827–32.10.4028/www.scientific.net/MSF.217-222.827 ↗
22. M. Takeda, F. Ohkubo, T. Shirai, and K. Fukui: Mater. Sci. Forum, 1996, vols. 217–222, pp. 815–20.10.4028/www.scientific.net/MSF.217-222.815 ↗
23. G. Biroli, G. Caglioti, L. Martini, and G. Riontino: Scripta Mater., 1998, vol. 39 (2), pp. 197–203.10.1016/S1359-6462(98)00140-7 ↗
24. M. Murayama and K. Hono: Scripta Mater., 2001, vol. 44, pp. 701–06.10.1016/S1359-6462(00)00651-5 ↗
25. D.H. Xiao, J.N. Wang, D.Y. Ding, and H.L. Yang: J. Alloys Compounds, 2003, vol. 352, pp. 84–88.10.1016/S0925-8388(02)01162-3 ↗
26. C.E. Macchi, A. Somoza, A. Dupasquier, and I.J. Polmear: Acta Mater., 2003, vol. 51, pp. 5151–58.10.1016/S1359-6454(03)00364-1 ↗
27. K. Raviprasad, C.R. Hutchinson, T. Sakurai, and S.P. Ringer: Acta Mater., 2003, vol. 51, pp. 5037–50.10.1016/S1359-6454(03)00351-3 ↗
28. B.C. Lee and J.K. Park: Acta Mater., 1998, vol. 46, pp. 4181–87.10.1016/S1359-6454(98)00117-7 ↗
29. B.P. Huang and Z.Q. Zheng: Acta Mater., 1998, vol. 46, pp. 4381–93.10.1016/S1359-6454(98)00079-2 ↗
30. Bi-Ping Huang and Zi-Qiao Zheng: Scripta Mater., 1998, vol. 38, pp. 357–62.10.1016/S1359-6462(97)00503-4 ↗
31. K. Yu, W. Li, S. Li, and J. Zhao: Mater. Sci. Eng. A, 2004, vol. A368, pp. 88–93.10.1016/j.msea.2003.09.092 ↗
32. Z. Yin, Q. Pan, Y. Zhang, and F. Jiang: Mater. Sci. Eng. A, 2000, vol. A280, pp. 151–55.10.1016/S0921-5093(99)00682-6 ↗
33. M. Furukawa, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2002, vol. A332, pp. 97–109.10.1016/S0921-5093(01)01716-6 ↗
34. Z. Horita, T. Fujinami, and T.G. Langdon: Mater. Sci. Eng. A, 2001, vol. 318A, pp. 34–41.10.1016/S0921-5093(01)01339-9 ↗
35. M. Fuurukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng. A, 1998, vol. 257A, pp. 328–32.10.1016/S0921-5093(98)00750-3 ↗
36. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197A, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
37. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
38. P.J. Apps, J.R. Bowen, and P.B. Prangnell: Acta Mater., 2003, vol. 51 (10), pp. 2811–22.10.1016/S1359-6454(03)00086-7 ↗
39. W.Q. Cao, A. Godfrey, W. Liu, and Q. Liu: Mater. Lett., 2003, vol. 57 (24–25), pp. 3767–74.10.1016/S0167-577X(03)00176-9 ↗
40. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, United Kingdom, 1995.
41. F.J. Humphreys: Acta Metall., 1979, vol. 27 (12), pp. 1801–14.10.1016/0001-6160(79)90071-3 ↗
42. M. Murayama, Z. Horita, and K. Hono: Acta Mater., 2001, vol. 49 (1), pp. 21–29.10.1016/S1359-6454(00)00308-6 ↗
43. N.Q. Chinh, J. Illy, Z. Kovàcs, Z. Horita, and T.G. Langdon: Mater. Sci. Forum, 2002, vols. 396–402, pp. 1007–12.10.4028/www.scientific.net/MSF.396-402.1007 ↗
44. M. Fuurukawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44 (11), pp. 4619–29.10.1016/1359-6454(96)00105-X ↗
45. Z. Horita, T. Fujinami, M. Nemoto, and T.G. Langdon: J. Mater. Proc. Technol., 2001, vol. 117 (3), pp. 288–92.10.1016/S0924-0136(01)00783-X ↗
46. M. Cabibbo, E. Evangelista, V. Latini, E. Nes, and S. Tangen: Mater. Sci. Forum, 2003, vols. 426–432, pp. 2673–79.10.4028/www.scientific.net/MSF.426-432.2673 ↗
47. V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe, and R.Z. Valiev: Mater. Sci. Eng. A, 2003, vol. 343A, pp. 43–50.10.1016/S0921-5093(02)00366-0 ↗
48. R.Z. Valiev, A.V. Korznikov, and R.R. Mulyukov: Mater. Sci. Eng. A, 1993, vol. 168A, pp. 141–48.10.1016/0921-5093(93)90717-S ↗
49. J. Wang, Y. Iwahashi, Z. Horita, M. Furukawa, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44 (7), pp. 2973–82.10.1016/1359-6454(95)00395-9 ↗
50. J. Gilbert Kaufman: Properties of Aluminum Alloys—Tensile, Creep and Fatigue Data at High and Low Temperatures, ASM, Materials Park, OH, 1999.
51. J.W. Martin: Micromechanisms in Particle-Hardening Alloys, Cambridge Solid State Science Series, Cambridge, United Kingdom, 1980.
52. J.M. Dowling and J.W. Martin: Acta Metall., 1976, vol. 24, pp. 1147–53.10.1016/0001-6160(76)90032-8 ↗