journal article·2004-11

Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys

Suyitno, V. I. Savran, L. Katgerman, D. G. Eskin

Publisher page

Abstract

Effects of casting speed and alloy composition on structure formation and hot tearing during direct-chill (DC) casting of 200-mm round billets from binary Al-Cu alloys are studied. It is experimentally shown that the grain structure, including the occurrence of coarse grains in the central part of the billet, is strongly affected by the casting speed and alloy composition, while the dendritic arm spacing is mostly dependent on the casting speed. The hot cracking pattern reveals the maximum hot-tearing susceptibility in the range of low-copper alloys (1 to 1.5 pct) and at high casting speeds (180 to 200 mm/min). The clear correlation between the amount of nonequilibrium eutectics (representing the reserve of liquid phase in the last stage of solidification) and hot tearing is demonstrated. A casting speed-copper concentration-hot-tearing susceptibility chart is constructed experimentally for real-scale DC casting. Computed dimensions of the solidification region in the billet are used to explain the experimentally observed structure patterns and hot cracking. Thermomechanical finite-element simulation of the solidifying billet was used as a tool for testing the applicability to DC casting of several hot-tearing criteria based on different principles. The results are compared to the experimentally observed hot tearing. It is noted that hot-tearing criteria that account for the dynamics of the process, e.g., strain rate, actual stress-strain situation, feeding rate, and melt flow, can be successfully used for the qualitative prediction of hot tearing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. E.F. Emley: Int. Met. Rev., 1976, vol. 206, pp. 75–115.
2. I.I. Novikov: Hot Shortness of Non-Ferrous Metals and Alloys, Nauka, Moscow, 1966.
3. T.W. Clyne and G.J. Davies: Proc. Conf. on Solidification and Castings of Metals, The Metals Society, London, 1979, pp. 275–78.
4. D.G. Eskin, Suyitno, and L. Katgerman: Progr. Mater. Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
5. V.A. Livanov, R.M. Gabidullin, and V.S. Shepilov: DC Casting of Aluminum Alloys, Metallurgiya, Moscow, 1977.
6. D.G. Eskin, J. Zuidema, Jr., V.I. Savran, and L. Katgerman: Mater. Sci. Eng. A, 2004, in press.
7. H. Nagaumi, K. Aoki, K. Komatsu, and N. Hagizawa: Mater. Sci. Forum, 2000, vols. 331–337, pp. 173–78.10.4028/www.scientific.net/MSF.331-337.173 ↗
8. M. M’Hamdi, R. Kieft, D. Mortensen, A. Mo, and J. Rabenberg: Aluminium, 2002, vol. 78, pp. 847–851.
9. K. Buxmann and E. Gold: JOM, 1982, vol. 4, pp. 28–34.10.1007/BF03337996 ↗
10. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974.
11. H. Nagaumi: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 49–57.10.1016/S1468-6996(01)00025-0 ↗
12. N.N. Prokhorov: Russian Castings Production, 1962, vol. 2, pp. 172–75.
13. I.I. Novikov and O.E. Grushko: Mater. Sci. Technol., 1995, vol. 11, pp. 926–32.10.1179/mst.1995.11.9.926 ↗
14. U. Feurer: Quality Control of Engineering Alloys and the Role of Metals Science, Delft University of Technology, Delft, The Netherlands, 1977, pp. 131–45.
15. L. Katgerman: JOM, 1982, vol. 34 (2), pp. 46–49.10.1007/BF03339110 ↗
16. B. Magnin, L. Katgerman, and B. Hannart: in Modeling of Casting Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 303–10.
17. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
18. Suyitno, W.H. Kool, and L. Katgerman: Mater. Sci. Forum, 2002, vols. 396–402, pp. 179–84.10.4028/www.scientific.net/MSF.396-402.179 ↗
19. M. Braccini, C.L. Martin, and M. Suery: in Modeling of Casting Welding and Advanced Solidification Processes IX, P.R. Sahm, P.N. Hansen, and J.G. Conley, eds., Shaker Verlag, Aachen, 2000, pp. 18–24.
20. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1461–72.10.1007/s11661-000-0264-2 ↗
21. M. M’Hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081–93.10.1007/s11661-002-0040-6 ↗
22. M.L. Nedreberg: Ph.D. Thesis, University of Oslo, Oslo, 1991.
23. J.M. Drezet and M. Rappaz: in Light Metals 2001, J.L. Anjier, ed., TMS, Warrendale, PA, 2001, pp. 887–93.
24. MSC. Marc Volume A: Theory and User Information, version 2000, MSC. Software 2000.
25. Suyitno, W.H. Kool, and L. Katgerman: in Light Metals 2003, P.N. Crepeau, ed., TMS, Warrendale, PA, 2003, pp. 753–58.
26. Suyitno, L. Katgerman, and A. Burghardt: Proc. ASME Heat Transfer Division—2002, T. Bayazitoglu and H.S. Cameron, eds., ASME, New York, NY, 2002, vol. 5, pp.147–54.
27. J. Zuidema, L. Katgerman, I.J. Opstelten, and J.M. Rabenberg: in Light Metals 2001, J.L. Anjier, ed., TMS, Warrendale, PA, 2001, pp. 873–79.
28. Y.S. Touloukian and E.H. Buyco: Thermophysical Properties of Matter, vol. 4, Specific Heat, Metallic Elements and Alloys, IFI/Plenum Press, New York, NY, 1970.
29. R.E. Taylor, H. Groot, T. Goerz, J. Ferrier, and D.L. Taylor: High Temp.-High Pressure, 1998, vol. 30, pp. 269–75.10.1068/htec302 ↗
30. R.A. Overfelt, S.I. Bakhtiyarov, and R.E. Taylor: High Temp.-High. Pressure, 2002, vol. 34, pp. 401–09.10.1068/htjr052 ↗
31. J.A. Brammer and C.M. Percival: Exp. Mech., 1970, vol. 10, pp. 245–50.10.1007/BF02324097 ↗
32. W.-M. van Haaften: Empact Report on Thermophysical Properties of EMPACT Alloys, Subtask 2.1, Delft University of Technology, Delft, The Netherlands, October 1997.
33. J. Hutt and D. StJohn: Int. J. Cast Met. Res., 1998, vol. 11, pp. 13–22.10.1080/13640461.1998.11819254 ↗
34. B.C.H. Venneker and L. Katgerman: J. Light Met., 2002, vol. 2, pp. 149–59.10.1016/S1471-5317(02)00041-X ↗
35. L. Backerud, E. Król, and J. Tamminen: Solidification Characteristics of Aluminium Alloys, vol. 1, Wrought Alloys, Skanaluminium/Universitetsforlaget AS, Oslo, 1986.
36. D.G. Eskin, Suyitno, J. Mooney, and L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1325–35.10.1007/s11661-004-0307-1 ↗
37. B. Commet, P. Delaire, J. Rabenberg, and J. Storm: in Light Metals 2003, P.N. Crepeau, ed., TMS, Warrendale, PA, 2003, pp. 711–17.
38. M. M’Hamdi, S. Benum, D. Mortensen, H.G. Fjaer, and J.-M. Drezet; Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1941–52.10.1007/s11661-003-0159-0 ↗