journal article·2009-03

Microstructural and Dilatational Changes during Tempering and Tempering Kinetics in Martensitic Medium-Carbon Steel

Minsu Jung, Seok-Jae Lee, Young-Kook Lee

Publisher page

Abstract

The microstructural and linear strain changes of martensitic medium-carbon steel were investigated during continuous heating to 600 °C at different rates using dilatometry and transmission electron microscopy (TEM). The precipitation of transition e-carbides between 70 °C to 240 °C and the precipitation of cementite between 200 °C to 450 °C were observed depending on the heating rate. The measured strain changes during tempering stages 1 and 3 were converted to the fraction of tempered martensite based on the theoretical iron atomic volume change between martensite and tempered martensite. The presegregation amount of carbon before tempering was calculated to be about 0.16 wt pct by comparing the theoretical strain change with the measured strain change. Tempering kinetic models were developed using the tempered martensite fractions converted from the measured strain changes during tempering stages 1 and 3. The kinetics models exhibit a good correlation with the experimentally measured tempering kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A.M. Sherman, G.T. Eldis, and M. Cohen: Metall. Trans. A, 1983, vol. 14A, pp. 995–1005.10.1007/BF02670437 ↗
2. P.C. Chen and P.G. Winchell: Metall. Trans. A, 1980, vol. 11A, pp. 1333–39.10.1007/BF02653487 ↗
3. P.C. Chen, B.O. Hall, and P.G. Winchell: Metall. Trans. A, 1980, vol. 11A, pp. 1323–31.10.1007/BF02653486 ↗
4. G.B. Olson and M. Cohen: Metall. Trans. A, 1983, vol. 14A, pp. 1057–65.10.1007/BF02659854 ↗
5. M.L. Bernshtein, L.M. Kaputkina, and S.D. Prokoshkin: Scripta Metall., 1984, vol. 18, pp. 863–68.10.1016/0036-9748(84)90250-3 ↗
6. H. Hayakawa, M. Tanigami, and M. Oka: Metall. Trans. A, 1985, vol. 16A, pp. 1745–50.10.1007/BF02670362 ↗
7. J.R. Genin, and P.A. Flinn: Trans. TMS-AIME, 1968, vol. 242, pp. 1419–30.
8. W.K. Choo and R. Kaplow: Acta Metall., 1973, vol. 21, pp. 725–32.10.1016/0001-6160(73)90036-9 ↗
9. N. DeCristofaro and R. Kaplow: Metall. Trans. A, 1977, vol. 8A, pp. 35–44.10.1007/BF02677261 ↗
10. N. DeCristofaro, R. Kaplow, and W.S. Owen: Metall. Trans. A, 1978, vol. 9A, pp. 821–25.10.1007/BF02649791 ↗
11. V.I. Izotov and L. M. Utevskiy: Phys. Met. Metallogr., 1968, vol. 25, pp. 86–96.
12. S. Nagakura, Y. Hirotsu, M. Kusunoki, T. Suzuki, and Y. Nakamura: Metall. Trans. A, 1983, vol. 14A, pp. 1025–31.10.1007/BF02670441 ↗
13. M. Kusunoki and S. Nagakura: J. Appl. Cryst., 1981, vol. 14, pp. 329–36.10.1107/S0021889881009485 ↗
14. M.K. Miller, P.A. Beaven, and G.D.W. Smith: Metall. Trans. A, 1981, vol. 12A, pp. 1197–1204.10.1007/BF02642333 ↗
15. M.K. Miller, P.A. Beaven, S.S. Brenner, and G.D.W. Smith: Metall. Trans. A, 1983, vol. 14A, pp. 1021–24.
16. G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–54.10.1007/BF02642436 ↗
17. L. Cheng, C.M. Brakman, B.M. Korevaar, and E.J. Mittemeijer: Metall. Trans. A, 1988, vol. 19A, pp. 2415–26.10.1007/BF02645469 ↗
18. G.R. Speich: Trans. TMS-AIME, 1969, vol. 245, pp. 2553–64.
19. K.A. Taylor, G.B. Olson, M. Cohen, and J.B. Van der Sande: Metall. Trans. A, 1989, vol. 20A, pp. 2749–65.10.1007/BF02670168 ↗
20. F.G. Caballero, C. García-Mateo, and C. García de Andrés: Mater. Trans., 2005, vol. 46, pp. 581–86.10.2320/matertrans.46.581 ↗
21. Y. Wang, S. Denis, B. Appolaire, and P. Archambault: J. Phys. VI Fr., 2004, vol. 120, pp. 103–10.
22. E.J. Mittemeijer, L. Cheng, P.J. van der Schaaf, C.M. Brakman, and B.M. Korevaar: Metall. Trans. A, 1988, vol. 19A, pp. 925–32.10.1007/BF02628377 ↗
23. M. Mångård and S. Larsson: M.Sc. Thesis, LiTH-IKP-Ex 1234, Linkoping University, 1995.
24. S.J. Lee, M.T. Lusk, and Y.K. Lee: Acta Mater., 2007, vol. 55, pp. 875–82.10.1016/j.actamat.2006.09.008 ↗
25. M. Jung, S.J. Lee, and Y.K. Lee: Solid State Phenom., 2006, vol. 118, pp. 375–80.10.4028/3-908451-25-6.375 ↗
26. C. Zener: Trans. AIME, 1946, vol. 167, pp. 550–95.
27. M. Hillert: Jernkont. Ann., 1957, vol. 141, pp. 757–89.
28. M. van Rooyen and E.J. Mittemeijer: Scripta Metall., 1982, vol. 16, pp. 1255–60.10.1016/0036-9748(82)90478-1 ↗
29. L.J.E. Hofer, E.M. Cohen, and W.C. Peebles: J. Am. Chem. Soc., 1949, vol. 71, pp. 189–95.10.1021/ja01169a048 ↗
30. Yu. A. Bagaryatskii: Dokl. Akad. Nauk SSSR, 1950, vol. 73, pp. 1161–64.
31. B.G. Lifshitz: Physical Properties of Metals and Alloys, Mashgiz, Moscow, 1956, p. 257.
32. H. Lipson and N.J. Petch: JISI, 1940, vol. 142, pp. 95–103.
33. W.C. Leslie, R.M. Fisher, and N. Sen: Acta Metall., 1959, vol. 7, pp. 632–44.10.1016/0001-6160(59)90133-6 ↗
34. K.H. Jack: JISI, 1951, vol. 69, pp. 26–36.
35. S. Nagakura: J. Phys. Soc. Jpn., 1959, vol. 14, pp. 186–95.10.1143/JPSJ.14.186 ↗
36. P.G. Winchell and M. Cohen: Trans. ASM, 1962, vol. 55, pp. 347–61.
37. R.C. Ruhl and M. Cohen: Trans. AIME, 1969, vol. 245, pp. 241–51.
38. Powder Diffraction File, ASTM card 6-0688, ASTM, Philadelphia, PA.
39. K.W. Andrews: JISI, 1965, vol. 203, pp. 721–27.
40. F.G. Caballero, M.K. Miller, S.S. Babu, and C. García-Mateo: Acta Mater., 2007, vol. 55, pp. 381–90.10.1016/j.actamat.2006.08.033 ↗
41. M. Cohen: Trans. JIM, 1970, vol. 11, pp. 145–51.10.2320/matertrans1960.11.145 ↗
42. F. S. Buffington, K. Hirano, and M. Cohen: Acta Metall., 1961, vol. 9, pp. 434–39.10.1016/0001-6160(61)90137-7 ↗