journal article·2003-12

Large strain mechanical behavior of 1018 cold-rolled steel over a wide range of strain rates

M. Vural, G. Ravichandran, D. Rittel

Publisher page

Abstract

The large-strain constitutive behavior of cold-rolled 1018 steel has been characterized at strain rates ranging from (dot varepsilon = 10 - 3 ) to 5 × 104 s−1 using a newly developed shear compression specimen (SCS). The SCS technique allows for a seamless characterization of the constitutive behavior of materials over a large range of strain rates. The comparison of results with those obtained by cylindrical specimens shows an excellent correlation up to strain rates of 104 s−1. The study also shows a marked strain rate sensitivity of the steel at rates exceeding 100 s−1. With increasing strain rate, the apparent average strain hardening of the material decreases and becomes negative at rates exceeding 5000 s−1. This observation corroborates recent results obtained in torsion tests, while the strain softening was not clearly observed during dynamic compression of cylindrical specimens. A possible evolution scheme for shear localization is discussed, based on the detailed characterization of deformed microstructures. The Johnson-Cook constitutive model has been modified to represent the experimental data over a wide range of strain rates as well as to include heat-transfer effects, and model parameters have been determined for 1018 cold-rolled steel.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. M.A. Meyers: Dynamic Behavior of Materials, John Wiley & Sons, New York, NY, 1994.10.1002/9780470172278 ↗
2. H. Kolsky: P. Phys. Soc. London, 1949, vol. 62-B, pp. 676–700.10.1088/0370-1301/62/11/302 ↗
3. R.J. Clifton and R.W. Klopp: Metals Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1986, vol. 8, p. 230.
4. J. Duffy, J.D. Campbell, and R.H. Hawley: J. Appl. Mech, 1971, vol. 38, pp. 83–91.10.1115/1.3408771 ↗
5. A. Marchand and J. Duffy: J. Mech. Phys. Solids, 1988, vol. 36(3), pp. 251–83.10.1016/0022-5096(88)90012-9 ↗
6. J. Duffy and Y.C. Chi: Mater. Sci. Eng. A-Struct., 1992, vol. 157(2), pp. 195–210.10.1016/0921-5093(92)90026-W ↗
7. A. Gilat and X.R. Wu: Int. J. Plasticity, 1997, vols. 6–7, pp. 611–32.10.1016/S0749-6419(97)00028-4 ↗
8. A. Gilat and C.S. Cheng: Int. J. Plasticity, 2002, vols. 5–6, pp. 787–99.10.1016/S0749-6419(01)00055-9 ↗
9. M.A. Meyers, L.W. Meyer, K.S. Vecchio, and U. Andrade: J. Phys. IV, 1991, vol. 1 (C3), pp. 11–17.
10. D. Rittel, S. Lee, and G. Ravichandran: Exp. Mech., 2002, vol. 42(1), pp. 58–64.10.1007/BF02411052 ↗
11. D. Rittel, G. Ravichandran, and S. Lee: Mech. Mater., 2002, vol. 34(10), pp. 627–42.10.1016/S0167-6636(02)00164-3 ↗
12. G.I. Taylor and H. Quinney: P. R. Soc. London, 1934, vol. A143, pp. 307–26.
13. Y. Bai and B. Dodd: Adiabatic Shear Localization: Occurrence, Theories, and Applications, Pergamon Press, Oxford, UK, 1992.
14. L.S. Costin and J. Duffy: J. Eng. Mater.-Trans. ASME, 1979, vol. 101(3), pp. 258–64.10.1115/1.3443686 ↗
15. K.A. Hartley, J. Duffy, and R.H. Hawley: J. Mech. Phys. Solids, 1987, vol. 35(3), pp. 283–301.10.1016/0022-5096(87)90009-3 ↗
16. R. Kapoor and S. Nemat-Nasser: Mech. Mater., 1998 vol. 27, pp. 1–12.10.1016/S0167-6636(97)00036-7 ↗
17. C.S. Cheng: Ph.D. Thesis, The Ohio State University, Columbus, OH, 1999.
18. G.R. Johnson and W.H. Cook: Proc. 7th Int. Symp. on Ballistics, The Hague, The Netherlands, 1983, pp. 541–47.
19. G.T. Gray III: ASM Handbook, ASM INTERNATIONAL, Metals Park, OH, 2000, vol. 8, pp. 462–76.
20. Y.B. Xu, Z.G. Wang, X.L. Huang, D. Xing, and Y.L. Bai: Mater. Sci. Eng., 1989, vol. A114, pp. 81–87.
21. J.D. Campbell and W.G. Ferguson: Phil. Mag., 1970, vol. 21, pp. 63–75.10.1080/14786437008238397 ↗
22. J.J. Mason, A.J. Rosakis, and G. Ravichandran: Mech. Mater., 1994, vol. 17, pp. 135–45.10.1016/0167-6636(94)90054-X ↗
23. D. Rittel: Mech. Mater., 1999, vol. 31(2), pp. 131–39.10.1016/S0167-6636(98)00063-5 ↗
24. P.R. Dixon and D.J. Parry: J. Phys. IV, 1991, vol. 1(C3), pp. 85–92.
25. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982, pp. 120–23.
26. W. Tong, R.J. Clifton, and S. Huang: J. Mech. Phys. Solids, 1992, vol. 40(6), pp. 1251–94.10.1016/0022-5096(92)90015-T ↗
27. Y. Estrin, A. Molinari, and S. Mercier: J. Eng. Mater. and Tech.-Trans. ASME, 1997, vol. 119(4), pp. 322–31.10.1115/1.2812265 ↗
28. P.S. Follansbee: in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, M.L. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Marcel Dekker Inc., New York, NY, 1986, pp. 451–79.