The mechanism of brittle fracture in a microalloyed steel: Part I. Inclusion-induced cleavage
Source abstract
Abstract
The cleavage resistance of two microalloyed steels (steels A and B) was studied using several tests, including the instrumented precracked Charpy and Charpy V-notch (CVN) techniques. Ductile-to-brittle transition temperatures were measured for the base-metal and simulated heat-affected zone (HAZ) microstructures. Steel B showed inferior cleavage resistance to steel A, and this could not be explained by differences in gross microstructure. Scanning electron fractography revealed that TiN inclusions were responsible for cleavage initiation in steel B. These inclusions were well bonded to the ferritic matrix. It is believed that a strong inclusion-matrix bond is a key factor in why TiN inclusions are potent cleavage initiators in steel. Strong bonding allows high stresses in a crack/notch-tip plastic zone to act on the inclusions without debonding the interface. Once an inclusion cleaves, the strong bond allows for transfer of the TiN crack into the ferritic matrix. It was estimated that only 0.0016 wt pct Ti was tied up in the offending inclusions in steel B. This indicates that extended times at high temperatures during the casting of such steels could produce TiN-related toughness deterioration at even modest Ti contents.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. C. Crussard, R. Borione, J. Plateau, Y. Morillon, and F. Maratray: J. Iron Steel Inst., 1956, June, pp. 146–77.
2. W.H. Bruckner, W.P. Rees, B.E. Hopkins, and H.R. Tipler: Weld. J., 1950, Sept., pp. 467s–476s.
3. N.P. Allen, W.P. Rees, B.E. Hopkins, and H.R. Tipler: J. Iron Steel Inst., 1953, June, pp. 108–20.
4. J.C. Danko and R.D. Stout: Trans. ASM, 1957, vol. 49, pp. 189–200.
5. N.J. Petch: J. Iron Steel Inst., 1953, May, pp. 25–28.
6. A.H. Cottrell: Trans. TMS, 1958, Apr., pp. 192–03.
7. C.J. McMahon and M. Cohen: Acta. Metall., 1965, vol. 13, pp. 591–04.10.1016/0001-6160(65)90121-5 ↗
8. A.R. Rosenfield, E. Votava, and G.T. Hahn: Trans. ASM, 1968, vol. 61, pp. 807–15.
9. L.E. Miller and G.C. Smith: J. Iron Steel Inst., 1970, Nov., pp. 998–05.
10. Y.J. Park and I.M. Bernstein: Metall. Trans. A, 1979, vol. 19A, pp. 1653–64.10.1007/BF02811698 ↗
11. J.J. Lewandowski and A.W. Thompson: Metall. Trans. A, 1986, vol. 17A, pp. 1769–86.10.1007/BF02817275 ↗
12. J.J. Lewandowski and A.W. Thompson: Acta. Metall., 1987, vol. 35, pp. 1453–62.10.1016/0001-6160(87)90091-5 ↗
13. J.H. Tweed and J.F. Knott: Met. Sci., 1983, vol. 17, pp. 45–54.10.1016/0036-9748(83)90067-4 ↗
14. J.H. Tweed and J.F. Knott: Acta Metall., 1987, vol. 35, pp. 1401–14.10.1016/0001-6160(87)90087-3 ↗
15. J.H. Tweed and J.F. Knott: Met. Constr., 1987, vol. 19, pp. 153–58.
16. P. Bowen and J.F. Knott: Proc. 7th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, TX, ASME, Golden, CO, 1988, pp. 503–07.
17. D.J. Alexander and I.M. Bernstein: Metall. Trans. A, 1989, vol. 20A, pp. 2321–35.10.1007/BF02666667 ↗
18. A. Kelly, W.R. Tyson, and A.H. Cottrell: Phil. Mag., 1967, vol. 15, pp. 567–87.10.1080/14786436708220903 ↗
19. E. Smith: Conf. on Mechanics and Physics of Fracture, Metals Society and Institute of Physics, Cambridge, United Kingdom, 1975, pp. 47–56.
20. D.P. Fairchild: Exxon Production Research Co., Houston, TX, J.Y. Koo: Exxon Corporate Research Laboratories, Clinton, NJ, private communication, 1982.
21. D.P. Fairchild: Welding Metallurgy of Structural Steels, Denver, CO, J.Y. Koo, ed., TMS, Warrendale, PA, 1987, pp. 303–18.
22. C.P. Royer: Welding Metallurgy of Structural Steels, Denver, CO, J.Y. Koo, ed., TMS, Warrendale, PA, 1987, pp. 255–62.
23. C. Thaulow, A.J. Paauw, and K. Guttormsen: Welding J., 1987, vol. 66 (9), pp. 266–79.
24. P.L. Harrison and P.H.M. Hart: Proc. Int. Conf. on Weld Failures, The Welding Institute, London, 1988, pp. 185–201.
25. P.H. Bateson, S.E. Webster, and E.F. Walker: Proc. 7th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, TX, ASME, Golden, CO, 1988, pp. 257–65.
26. S.E. Webster and E.F. Walker: Proc. 7th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, TX, ASME, Golden, CO, 1988, pp. 395–03.
27. T.M. Scoonover: Proc. Int. Conf. on The Metallurgy, Welding, and Qualification of Microalloyed (HSLA) Steel Weldments, Houston, TX, Nov. 6–8, 1990, pp. 276–305.
28. P.L. Harrison, D.J. Abson, A.R. Jones, and D.J. Sparkes: in Quantitative Methods in Fractography, ASTM STP 1085, B.M. Strauss and S.K. Putatunda, eds., ASTM, Philadelphia, PA, 1990, pp. 102–22.10.1520/STP23537S ↗
29. H. Ikawa, H. Oshige, and T. Tanoue: Trans. Jpn. Welding Soc., 1980, vol. 11 (2), pp. 87–96.
30. J.H. Chen, Y. Kikuta, T. Araki, M. Yoneda, and Y. Matsuda: Acta Metall., 1984, vol. 32 (10), pp. 1779–88.10.1016/0001-6160(84)90234-7 ↗
31. J.Y. Koo and A. Ozekcin: Welding Metallurgy of Structural Steels, Denver, CO, J.Y. Koo, ed., TMS, Warrendale, PA, 1987, pp. 119–35.
32. S. Aihara and T. Haze: TMS Annual Meeting, Phoenix, AZ, Jan. 25–28, 1988, paper no. A88-14.
33. S. Aihara and K. Okamoto: Proc. Int. Conf. on The Metallurgy, Welding, and Qualification of Microalloyed (HSLA) Steel Weldments, Houston, TX, Nov. 6–8, 1990, pp. 402–26.
34. B.C. Kim, S. Lee, N.J. Kim, and D.Y. Lee: Metall. Trans. A, 1991, vol. 22A, pp. 139–49.10.1007/BF03350956 ↗
35. S. Lee, B.C. Kim, and D. Kwon: Metall. Trans. A, 1992, vol. 23A, pp. 2803–16.10.1007/BF02651759 ↗
36. S. Lee, B.C. Kim, and D. Kwon: Metall. Trans. A, 1993, vol. 24A, pp. 1133–41.10.1007/BF02657244 ↗
37. C.L. Davis and J.E. King: Metall. Mater: Trans. A, 1994, vol. 25A, pp. 563–73.
38. D.P. Fairchild: Ph.D. Thesis, The Ohio State University, Columbus, OH, 1995.
39. K. Ohya, J. Kim, K. Yokoyama, and M. Nagumo: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2574–82.10.1007/BF02652351 ↗
40. D.P. Fairchild and D.G. Howden: The Ohio State Univ. Res. Rep., Sept. 1989.
41. R.T. DeHoff and F.N. Rhines: Quantitative Microscopy, McGraw-Hill Inc., New York, NY, 1968, ch. 5.
42. W. Oldfield: ASTM Standardization News, 1975, Nov., pp. 24–29.10.1088/0031-9112/26/1/044 ↗
43. W. Oldfield, W.L. Server, R.A. Wullaert, and K.E. Stahlkopf: Int. J. Pressure Vessel Piping, 1978, vol. 6, pp. 203–22.10.1016/0308-0161(78)90017-0 ↗
44. T. Sakuma and R.W.K. Honeycombe: Mater. Sci. Technol., 1985, vol. 1, pp. 351–56.10.1179/mst.1985.1.5.351 ↗
45. H. Tada: The Stress Analysis of Cracks Handbook, 2nd ed., Paris Productions Inc., St. Louis, MO, 1985.
46. M. Suzuki, K. Tsukada, and I. Watanabe: Proc. Int. Conf. on Offshore Welded Structures, The Welding Institute, London, 1982, pp. P16 and 1–12.
47. L. Meyer, F. Heisterkamp, and D. Lauterborn: Proceeding and Properties of Low Carbon Steel, Ferrous Committee of TMS-AIME, Warrendale, PA, 1973, pp. 297–321.
48. D.C. Houghton, G.C. Weatherly, and J.D. Embury: Proc. Conf. on Thermomechanical Processing of Microalloyed Austenite, Pittsburgh, PA, Aug. 17–19, 1981, TMS-AIME, Warrendale, PA, 1981, pp. 267–92
49. W. Roberts: Proc. Conf. HSLA Steels, Technology and Applications Philadelphia, PA, Oct. 3–6, 1983, ASM, Metals Park, OH, 1983, pp. 33–65.
50. Z. Chen, M.H. Loretto, and R.C. Cochrane: Mater. Sci. Technol., 1987, vol. 3, pp. 836–44.10.1179/mst.1987.3.10.836 ↗
51. H.H. Hausner and M.G. Bowman: Fundamentals of Refractory Compounds, Plenum Press, New York, NY, 1968.
52. L.E. Toth: Transition Metal Carbides and Nitrides, Academic Press Inc., New York, NY, 1971.
53. E. Smith: Int. J. Fract. Mech., 1968, vol. 4(2), pp. 131–45.10.1007/BF00188940 ↗