journal article·2007-07

Solidification in Spray Forming

P.S. GRANT

Publisher page

Abstract

Solidification in spray forming takes place in two distinct steps: typically half of the alloy latent heat is removed rapidly from the droplet spray created by gas atomization; the droplets are then constituted into a billet at deposition where the remaining liquid fraction solidifies relatively slowly. However, within the droplet spray, individual droplets have different thermal and solidification histories and depositing droplets may be solid, mushy, or liquid. Despite many studies of solidification behavior in spray forming, uncertainties and some misconceptions remain on how the solidification conditions in the spray and billet interact to give rise to the characteristic spray-formed microstructure comprising refined, polygonal/equiaxed primary grains with low levels of microsegregation. This article presents a simple numerical model for the spray-formed grain size arising from the deposition of the various droplets in the spray and combines insights provided by the model with previous investigations of the phenomena occurring during and immediately after deposition to propose a comprehensive description of the important solidification behavior during spray forming. Remelting, grain multiplication, thermal and elemental equilibration, and microstructural coarsening are proposed to play a critical role in the evolution of the spray-formed microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Materials Engineering and Processing · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Grant P.S. (1995) Progr Mater Sci 39:497–54510.1016/0079-6425(95)00004-6 ↗
2. Hummert K., Frech W., Schwagereit M. (1999) Metall 53:496–500
3. Spiegelhauer C. (2000) Steel World 5:30–32
4. Jacobson D.M. (2000) Powder Met 43:200–02
5. Yoshikawa K., Yoneda Y., Koide K. (2000) Powder Metall 43:198–99
6. Mathur P., Apelian D., Lawley A. (1989) Acta Metall 37:429–4310.1016/0001-6160(89)90227-7 ↗
7. Grant P.S., Cantor B., Katgerman L. (1993) Acta Mater 41:3097–310810.1016/0956-7151(93)90039-U ↗
8. Grant P.S., Cantor B., Katgerman L. (1993) Acta Mater 41:3109–1810.1016/0956-7151(93)90040-Y ↗
9. Grant P.S., Cantor B. (1995) Acta Mater 43:913–2110.1016/0956-7151(94)00315-9 ↗
10. Seok H.-K., Oh K., Ra H.Y., Yeo D.-H., Lee H.-I. (1998) Metall Mater Trans B 29B:699–70810.1007/s11663-998-0105-z ↗
11. Mingard K.P., Alexander P.W., Langridge S.J., Tomlinson G.A., Cantor B. (1998) Acta Mater 46:3511–2110.1016/S1359-6454(98)00034-2 ↗
12. Mingard K.P., Cantor B., Palmer I.G., Hughes I.R., Alexander P.W., Willis T.C., White J. (2000) Acta Mater 48:2435–4910.1016/S1359-6454(00)00075-6 ↗
13. Seok H.K., Lee J.-C., Lee H.-I., Lee C.H., Oh K.H., Ra Y.H. (2000) Metall Mater Trans A 31A:1479–8810.1007/s11661-000-0266-0 ↗
14. Bergmann D., Fritsching U. (2004) Int J Thermal Sci 43:403–1510.1016/j.ijthermalsci.2003.10.004 ↗
15. Hattel J.H., Pryds N.H. (2004) Acta Mater 52:5275–8810.1016/j.actamat.2004.07.016 ↗
16. Garmendia I., Landaberea A., Vicario T., Fritsching U., Belkessam O., Mi J., Grant P.S. (2005) In: Loria E.A. (ed.) 2005 Superalloys 718, 625, 706 and Derivatives. TMS, Warrendale, PA, pp. 441–51
17. S. Hogg, A. Lambourne, A. Ogilvy, and P.S. Grant: Scripta Mater., in press.
18. Lubanska H. (1970) J Met 32:45–49
19. Lin Y., Zhou Y., Lavernia E.J. (2004) In: Chu M.G., Granger D.A., Han Q. (eds) Solidification of Aluminum Alloys. TMS, Warrendale, PA, 331–40
20. Xu Q., Lavernia E.J. (2001) Acta Mater 49:3849–6110.1016/S1359-6454(01)00253-1 ↗
21. Schneider A., Uhlenwinkel V., Harig H., Bauckhage K. (2004) Mater Sci Eng A 383:114–2110.1016/j.msea.2004.02.038 ↗
22. Dai S.L., Delplanque J.-P., Lavernia E.J. (1998) Metall Mater Trans A 29A:2597–261110.1007/s11661-998-0232-9 ↗
23. Lin Y.J., Zhou Y., Lavernia E.J. (2004) Metall Mater Trans A 35A:3251–6310.1007/s11661-004-0068-x ↗
24. Grant P.S., Kim W.T., Bewlay B.P., Cantor B. (1989) Scripta Metall 23:1651–5610.1016/0036-9748(89)90337-2 ↗
25. Baik K.H., Grant P.S., Cantor B. (2003) Acta Mater 52:199–20810.1016/j.actamat.2003.09.006 ↗
26. Newbery A.P., Jordan R.M., Singer A.R.E., Cantor B. (1996) Scripta Mater 35:47–5110.1016/1359-6462(96)00086-3 ↗
27. Hoile S., Rayment T., Grant P.S. (2004) Metall Mater Trans B 35B:1113–22
28. Geibel A., Froyen L., Delaey L. (1996) J Thermal Spray Technol 5:419–3010.1007/BF02645272 ↗
29. Tillwick J., Uhlenwinkel V., Bauckhage K. (1999) Int J Heat Fluid Flow 20:530–3710.1016/S0142-727X(99)00042-9 ↗
30. Mathur P., Annavarapu S., Apelian D., Lawley A. (1991) Mater Sci Eng A 142:261–7610.1016/0921-5093(91)90665-A ↗
31. Newbery A.P., Grant P.S. (2000) J Thermal Spray Technol 9:250–5810.1361/105996300770350005 ↗
32. Rangel R.H., Delplanque J.-P. (1998) Acta Mater 46:4925–3310.1016/S1359-6454(98)00190-6 ↗
33. Liu H., Lavernia E.J., Rangel R.H. (1995) Acta Metall Mater 43:2053–7210.1016/0956-7151(94)00386-V ↗
34. Delplanque J-P., Cai W.D., Rangel R.H., Lavernia E.J. (1997) Acta Mater 45:5233–4310.1016/S1359-6454(97)00166-3 ↗
35. Armster S.Q., Delplanque J.-P., Rein M., Lavernia E.J. (2002) Int Mater Rev 47:265–30110.1179/174328013X13789822110946 ↗
36. Hunt J.D., Jackson K.A. (1967) Trans TMS-AIME 239:864–67
37. Fiedler H.C., Sawyer T.F., Kopp R.W., Leatham A.G. (1987) J Met 39:28–33
38. Kennedy R.L., Davis R.M., Vaccaro F.P. (1989) In: Loria E.A. (eds) Superalloy 718: Metallurgy and Applications. TMS, Warrendale, PA, pp. 97–10810.7449/1989/Superalloys_1989_97_108 ↗
39. Butzer G., Bowen K. (1998) Adv Mater Proc 153(3):21–23
40. Barrat M.D., Ward R.M., Peng Z., Shi Z., Jacobs M.H., Grant P.S. (2004) In: Green K.A., et al. (eds) Superalloys 2004. TMS, Warrendale, PA, pp. 563–70
41. Meyer O., Schneider A., Uhlenwinkel V., Fritsching U. (2003) Int J Thermal Sci 42:561–6910.1016/S1290-0729(03)00022-X ↗
42. Annavarapu S., Doherty R.D. (1995) Acta Metall Mater 43:3207–3010.1016/0956-7151(94)00448-Q ↗
43. Manson-Whitton E.D., Stone I.C., Jones J.R., Grant P.S., Cantor B. (2002) Acta Mater 50:2517–3510.1016/S1359-6454(02)00080-0 ↗
44. Singer A.R.E. (1972) J Inst Met 100(7):185–90
45. McHugh K.M., Delplanque J.-P., Johnson S.B., Lavernia E.J., Zhou Y., Lin Y. (2004) Mater Sci Eng A 383:96–10610.1016/j.msea.2004.02.041 ↗
46. Carter W.T. Jr., Forbes Jones R.M., Minisandram R.S. (2004) J Mater Sci 39:7253–5810.1023/B:JMSC.0000048739.50256.a9 ↗