Correcting the Stress-Strain Curve in Hot Compression Process to High Strain Level
Source abstract
Abstract
This article provides a model that regards the evolution behavior of the friction coefficient in the cylindrical compression test as a function of true strain on the basis of experimental results, allowing the effect of friction on the deformation curve at extremely high strain level to be evaluated and corrected for the first time. The compressive tests were carried out at a stroke rate of 1.2 mm/s on IHS38MSV hypoeutectoid steel with various lubricants at temperatures ranging from 800 °C to 1200 °C. The results showed that the friction coefficient for the compressive process was not constant and the variation could be approximated by an exponential equation along with the true strain. Microstructure observation showed that the stress increase in the later stages of process should be closely related to the large increase in the friction coefficient. The corrected curves were found to correlate well with the microstructure observation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Z. Gao and R.V. Grandhi: Int. J. Mach. Tools Manuf., 2000, vol. 40, pp. 691–710.10.1016/S0890-6955(99)00083-8 ↗
2. H. Monajati, M. Jahazi, R. Bahrami, and S. Yue: Mater. Sci. Eng., 2004, vol. A373, pp. 286–93.10.1016/j.msea.2004.01.027 ↗
3. L. Briottet, J.J. Jonas, and F. Montheillet: Acta Mater., 1996, vol. 44, pp. 1665–72.10.1016/1359-6454(95)00257-X ↗
4. N. Bay: J. Mech. Work. Technol., 1987, vol. 14, pp. 203–23.10.1016/0378-3804(87)90061-1 ↗
5. A.T. Male and V. Depierre: J. Lubr. Technol., 1970, vol. 92, pp. 389–97.10.1115/1.3451419 ↗
6. F.P. Bowden and D. Rabor: The Friction Lubrication of Solid, 1st ed., Oxford University Press, London, 1950, p. 1.
7. J.A. Schey: Tribology in Metalworking: Friction, Lubrication and Wear, ASM, Metals Park, OH, 1983, p. 1.
8. H. Monajati, M. Jahazi, S. Yue, and A.K. Taheri: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 895–905.10.1007/s11661-005-0284-z ↗
9. G.W. Pearsall and W.A. Backofen: Trans. ASME. Ser. D: J. Basic Eng., 1963, vol. 85B, pp. 68–75.
10. G.T. van Rooyen and W.A. Backofen: Int. J. Mech. Sci., 1960, vol. 1, pp. 1–27.10.1016/0020-7403(60)90027-8 ↗
11. R. Ebrahimi, A. Najafizadeh, and R. Shateri: Proc. Steel Symp. 81, Iranian Institute for Iron and Steel, Isfahan, Iran, Mar. 2–3, 2003, pp. 230–37.
12. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw Hill Book Co., New York, NY, 1986, p. 539.
13. S.I. Oh, S.L. Semiatin, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 963–75.10.1007/BF02675571 ↗
14. R. Ebrahimi and A. Najafizadeh: J. Mater. Process. Technol., 2004, vol. 52, pp. 136–43.10.1016/j.jmatprotec.2004.03.029 ↗
15. D.Y. Cai, L.Y. Xiong, W.C. Liu, G.D. Sun, and M. Yao: Mater. Charact., 2007, vol. 58, pp. 941–46.10.1016/j.matchar.2006.09.004 ↗
16. N. Frederiksen and T. Wanheim: J. Mech. Work. Technol., 1985, vol. 12, pp. 261–68.10.1016/0378-3804(85)90141-X ↗
17. N. Bay: J. Mech. Work. Technol., 1987, vol. 14, pp. 203–23.10.1016/0378-3804(87)90061-1 ↗
18. http://www.sumico.co.jp.
19. http://www.achesonindustries.com.
20. Y.P. Li: Metall. Trans. A, 2008, vol. 39A.
21. http://www.yamanaka-eng.co.jp.