Microstructural Inclusion Influence on Fatigue of a Cast A356 Aluminum Alloy
Source abstract
Abstract
We examine the dependence of fatigue properties on the different size scale microstructural inclusions of a cast A356 aluminum alloy in order to quantify the structure-property relations. Scanning electron microscopy (SEM) analysis was performed on fatigue specimens that included three different dendrite cell sizes (DCSs). Where past studies have focused upon DCSs or pore size effects on fatigue life, this study includes other metrics such as nearest neighbor distance (NND) of inclusions, inclusion distance to the free surface, and inclusion type (porosity or oxides). The present study is necessary to separate the effects of numerous microstructural inclusions that have a confounding effect on the fatigue life. The results clearly showed that the maximum pore size (MPS), NND of gas pores, and DCS all can influence the fatigue life. These conclusions are presumed to be typical of other cast alloys with similar second-phase constituents and inclusions. As such, the inclusion-property relations of this work were employed in a microstructure-based fatigue model operating on the crack incubation and MSC with good results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. R.I. Stephens, H.D. Berns, R.A. Chernenkoff, R.L. Indig, S.K. Koh, D.J. Lingenfelser, M.R. Mitchell, R.A. Testin, and C.C. Wigant: Low Cycle Fatigue of A356-T6 Cast Aluminum Alloy—A Round-Robin Test Program, SAE Technical Publication SP760, SAE, 1988a, vol. 881701, pp. 1–28, www.sae.org.10.4271/881701 ↗
2. R.I. Stephens, B.J. Mahoney, and R.G. Fossman: Low Cycle Fatigue of A356-T6 Cast Aluminum Alloy Wheels, SAE Technical Publication SP760, SAE, 1988b, vol. 881707, pp. 93–102, www.sae.org.10.4271/881707 ↗
3. J. Fan, D.L. McDowell, M.F. Horstemeyer, and K.A. Gall: Eng. Fract. Mech., 2001, vol. 68 (15), pp. 1687–1706.10.1016/S0013-7944(01)00064-9 ↗
4. K. Gall, N. Yang, M.F. Horstemeyer, D.L. McDowell, and J. Fan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3079–88.10.1007/s11661-999-0218-2 ↗
5. K. Gall, N. Yang, M.F. Horstemeyer, D.L. McDowell, and J. Fan: Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 159–72.10.1046/j.1460-2695.2000.00239.x ↗
6. K. Gall, M.F. Horstemeyer, B.W. Degner, D.L. McDowell, and J. Fan: Int. J. Fract., 2001, vol. 198 (3), pp. 207–33.10.1023/A:1011033304600 ↗
7. M.F. Horstemeyer: Scripta Mater., 1998, vol. 39 (11), pp. 1491–95.10.1016/S1359-6462(98)00343-1 ↗
8. M.F. Horstemeyer and A.M. Gokhale: Int. J. Solids Struct., 1999, vol. 36, pp. 5029–55.10.1016/S0020-7683(98)00239-X ↗
9. B. Zhang, D.R. Poirier, and W. Chen: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2659–66.10.1007/s11661-999-0306-3 ↗
10. D.A. Lados and D. Apelian: Mater. Sci. Eng. A, 2001, vol. 385, pp. 200–11.
11. D.A. Lados, D. Apelian, and J.F. Major: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2405–18.10.1007/BF02586215 ↗
12. J.F. Major: AFS Trans., 1997, vol. 102, pp. 901–06.
13. S. Kumai, J. Hu, Y. Higo, and S. Nunomura: Acta Mater., 1996, vol. 44 (6), pp. 2249–25.10.1016/1359-6454(95)00357-6 ↗
14. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 85–97.10.1016/S1471-5317(00)00009-2 ↗
15. J. Fan and S. Hao: J. Comput. Aided Mater. Des., 2004, vol. 11, pp. 139–61.10.1007/s10820-005-3172-3 ↗
16. J.Z. Yi, Y.X. Gao, P.D. Lee, and T.C. Lindley: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 301–11.10.1007/BF02693159 ↗
17. X. Zhu, J.Z. Yi, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1111–22.10.1007/s11661-006-9070-9 ↗
18. J.-Y. Buffière, S. Savelli, P.H. Jouneau, E. Maire, and R. Fougères: Mater. Sci. Eng. A, 2001, vol. 316, pp. 115–26.10.1016/S0921-5093(01)01225-4 ↗
19. J.Z. Yi, Y.X. Gao, P.D. Lee, H.M. Flower, and T.C. Lindley: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1879–90.10.1007/s11661-003-0153-6 ↗
20. J.Z. Yi, P.D. Lee, T.C. Lindley, and T. Fukui: Mater. Sci. Eng. A, 2006, vol. 432, pp. 59–68.10.1016/j.msea.2006.07.003 ↗
21. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 73–84.10.1016/S1471-5317(00)00008-0 ↗
22. D.L. McDowell, K. Gall, M.F. Horstemeyer, and J. Fan: Eng. Fract. Mech., 2003, vol. 70, pp. 49–80.10.1016/S0013-7944(02)00021-8 ↗
23. J. Fan, D.L McDowell, M.F. Horstemeyer, and K.A. Gall: Eng. Fract. Mech., 2003, vol. 70 (10), pp. 1281, 1302.10.1016/S0013-7944(02)00097-8 ↗
24. Y. Xue, D.L. McDowell, M.F. Horstemeyer, M. Dale, and J.B. Jordon: Eng. Fract. Mech., 2007, vol. 74, pp. 2810–23.10.1016/j.engfracmech.2006.12.031 ↗