Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy
Source abstract
Abstract
Abstract The deformation microstructure of austenitic Fe-18Cr-(10-12)Ni (wt pct) alloys with low stacking fault energies, estimated by first-principles calculations, was investigated after cold rolling. The ɛ-martensite was found to play a key role in the nucleation of α′-martensite, and at low SFE, ɛ formation is frequent and facilitates nucleation of α′ at individual shear bands, whereas shear band intersections become the dominant nucleation sites for α′ when SFE increases and mechanical twinning becomes frequent.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. G.B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791–95.10.1007/BF02672301 ↗
2. D. Bhandarkar, V. Zackay, and E. Parker: Metall. Mater. Trans. B, 1972, vol. 3B, pp. 2619–31.10.1007/BF02644238 ↗
3. A. Das, S. Sivaprasad, M. Ghosh, P.C. Chakraborti, and S. Tarafder: Mater. Sci. Eng. A, 2008, vol. 486, pp. 283–86.10.1016/j.msea.2007.09.005 ↗
4. P. Hedström, L.E. Lindgren, J. Almer, U. Lienert, J. Bernier, M. Terner, and M. Odén: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1039–48.10.1007/s11661-009-9807-3 ↗
5. L. Vitos, P. Korzhavyi, and B. Johansson: Phys. Rev. Lett., 2006, vol. 96, p. 117210.10.1103/PhysRevLett.96.117210 ↗
6. P. Ferreira and P. Müllner: Acta Mater., 1998, vol. 46, pp. 4479–84.10.1016/S1359-6454(98)00155-4 ↗
7. G. Olson and M. Cohen: J. Less Common Met., 1972, vol. 28, pp. 107–18.10.1016/0022-5088(72)90173-7 ↗
8. K. Spencer, M. Véron, K. Yu-Zhang, and J.D. Embury: Mater. Sci. Technol., 2009, vol. 25, pp. 7–17.10.1179/174328408X293603 ↗
9. H. Schuman: Krist. Technol., 1975, vol. 10, pp. 401–11.10.1002/crat.19750100409 ↗
10. M. Humbert, B. Petit, B. Bolle, and N. Gey: Mater. Sci. Eng. A, 2007, vol. 454–455, pp. 508–17.10.1016/j.msea.2006.11.112 ↗
11. T.-H. Lee, H.-Y. Ha, J.-Y. Kang, J. Moon, C.-H. Lee, and S.-J. Park: Acta Mater., 2013, vol. 61, pp. 7399–410.10.1016/j.actamat.2013.08.046 ↗
12. J.F. Breedis and L. Kaufman: Metall. Trans., 1971, vol. 2, pp. 2359–71.10.1007/BF02814874 ↗
13. P. Hedström, U. Lienert, J. Almer, and M. Odén: Scr. Mater., 2007, vol. 56, pp. 213–16.10.1016/j.scriptamat.2006.10.009 ↗
14. C.X. Huang, G. Yang, Y.L. Gao, S.D. Wu, and S.X. Li: J. Mater. Res., 2007, vol. 22, pp. 724–29.10.1557/jmr.2007.0094 ↗
15. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
16. L. Murr, K. Staudhammer, and S. Hecker: Metall. Trans. A, 1982, vol. 13: 627–3510.1007/BF02644428 ↗
17. J.-Y. Choi and W. Jin: Scr. Mater., 1997, vol. 36, pp. 99–104.10.1016/S1359-6462(96)00338-7 ↗
18. F. Lecroisey and A. Pineau: Metall. Trans., 1972, vol. 3, pp. 391–400.10.1007/BF02642042 ↗
19. H. Biermann, J. Solarek, and A. Weidner: Steel Res. Int., 2012, vol. 83, pp. 512–20.10.1002/srin.201100293 ↗
20. N. Nakada, H. Ito, Y. Matsuoka, T. Tsuchiyama, and S. Takaki: Acta Mater., 2010, vol. 58, pp. 895–903.10.1016/j.actamat.2009.10.004 ↗
21. D. Borisova, V. Klemm, S. Martin, S. Wolf, and D. Rafaja: Adv. Eng. Mater., 2013, vol. 15, pp. 571–82.10.1002/adem.201200327 ↗
22. N. Gey, B. Petit, and M. Humbert: Metall. Mater. Trans. A, 2005, vol. 36, pp. 3291–99.10.1007/s11661-005-0003-9 ↗
23. R. Naraghi, P. Hedström, and A. Borgenstam: Steel Res. Int., 2011, vol. 82, pp. 337–45.10.1002/srin.201000118 ↗
24. M. Chen, S. Gao, D. Terada, A. Shibata, and N. Tsuji: 2013, pp. 563–69.10.1002/9781118792148.ch68 ↗
25. E.S.S. Perdahcıoğlu, H.J.M.J.M. Geijselaers, and M. Groen: Scr. Mater., 2008, vol. 58, pp. 947–50.10.1016/j.scriptamat.2008.01.023 ↗
26. E.S. Perdahcioglu and H.J.M. Geijselaers: Acta Mater., 2012, vol. 60, pp. 4409–19.10.1016/j.actamat.2012.04.042 ↗
27. A. Das, P.C. Chakraborti, S. Tarafder, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2011, vol. 27, pp. 366–70.10.1179/026708310X12668415534008 ↗
28. A. Weidner, S. Martin, V. Klemm, U. Martin, and H. Biermann: Scr. Mater., 2011, vol. 64, pp. 513–16.10.1016/j.scriptamat.2010.11.028 ↗
29. S. Martin, S. Wolf, U. Martin, L. Krüger, and D. Rafaja: Metall. Mater. Trans. A, 2014, vol. 47A, pp. 49–58.
30. S. Zaefferer and N.-N. Elhami: Acta Mater., 2014, vol. 75, pp. 20–50.10.1016/j.actamat.2014.04.018 ↗
31. I. Gutierrez-Urrutia, S. Zaefferer, and D. Raabe: Scr. Mater., 2009, vol. 61, pp. 737–40.10.1016/j.scriptamat.2009.06.018 ↗
32. Y. Tian, A. Borgenstam, and P. Hedström: Mater. Today Proc., 2015, vol. 2, pp. 687–90.10.1016/j.matpr.2015.07.376 ↗
33. P.J.H. Denteneer and W. van Haeringen: J. Phys. C Solid State Phys., 1987, vol. 20, p. L883.10.1088/0022-3719/20/32/001 ↗
34. L. Vitos: Phys. Rev. B, 2001, vol. 64, p. 14107.10.1103/PhysRevB.64.014107 ↗
35. L. Vitos, I.A. Abrikosov, and B. Johansson: Phys. Rev. Lett., 2001, vol. 87, p. 156401.10.1103/PhysRevLett.87.156401 ↗
36. A. V. Ruban, A.B. Belonoshko, and N. V. Skorodumova: Phys. Rev. B, 2013, vol. 87, pp. 1–6.10.1103/PhysRevB.87.014405 ↗
37. A. Reyes-Huamantinco, P. Puschnig, C. Ambrosch-Draxl, O.E. Peil, and A. V. Ruban: Phys. Rev. B, 2012, vol. 86: 1–5.10.1103/PhysRevB.86.060201 ↗
38. J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, pp. 3865–68.10.1103/PhysRevLett.77.3865 ↗
39. H.J. Monkhorst and J.D. Pack: Phys. Rev. B, 1976, vol. 13, pp. 5188–92.10.1103/PhysRevB.13.5188 ↗
40. I.A. Abrikosov, S.I. Simak, B. Johansson, A. V. Ruban, and H.L. Skriver: Phys. Rev. B, 1997, vol. 56, p. 9319.10.1103/PhysRevB.56.9319 ↗
41. O.E. Peil, A. V. Ruban, and B. Johansson: Phys. Rev. B, 2012, vol. 85, p. 165140.10.1103/PhysRevB.85.165140 ↗
42. A. V. Ruban and H.L. Skriver: Phys. Rev. B, 2002, vol. 66, p. 24201.10.1103/PhysRevB.66.024201 ↗
43. A. V. Ruban, S.I. Simak, P.A. Korzhavyi, and H.L. Skriver: Phys. Rev. B, 2002, vol. 66, p. 24202.10.1103/PhysRevB.66.024202 ↗
44. W. Li, S. Lu, D. Kim, K. Kokko, S. Hertzman, S.K. Kwon, and L. Vitos: Appl. Phys. Lett., 2016, vol. 108: 08190310.1063/1.4942809 ↗
45. A. Das: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 748–68.10.1007/s11661-015-3266-9 ↗
46. I.A. Abrikosov, A. V. Ponomareva, P. Steneteg, S.A. Barannikova, and B. Alling: Curr. Opin. Solid State Mater. Sci., 2016, vol. 20, pp. 85–106.10.1016/j.cossms.2015.07.003 ↗
47. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, and T. Antretter: Int. J. Plast., 2000, vol. 16, pp. 723–48.10.1016/S0749-6419(99)00078-9 ↗
48. K. Sato, M. Ichinose, Y. Hirotsu, and Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868–77.10.2355/isijinternational.29.868 ↗
49. L. Remy and A. Pineau: Mater. Sci. Eng., 1976, vol. 26, pp. 123–32.10.1016/0025-5416(76)90234-2 ↗
50. S. Matsumoto, A. Sato, and T. Mori: Acta Metall. Mater., 1994, vol. 42, pp. 1207–13.10.1016/0956-7151(94)90137-6 ↗
51. T. Masumura, N. Nakada, T. Tsuchiyama, S. Takaki, T. Koyano, and K. Adachi: Acta Mater., 2015, vol. 84, pp. 330–38.10.1016/j.actamat.2014.10.041 ↗
52. A. Weidner, C. Segel, and H. Biermann: Mater. Lett., 2015, vol. 143, pp. 155–58.10.1016/j.matlet.2014.12.098 ↗