journal article·2001-12

Experimental evaluation of stress field around crack tip by caustic method

Yuichi Kawagishi, Masayuki Shozu, Yukio Hirose

Mechanics of Materials· Volume 33· Issue 12
Publisher page

Abstract

Abstract The caustic method is an optical technique which is useful to determine stress intensity factor values. In this paper, the caustics method was applied to specimens which have an oblique crack, various thicknesses and an open notch to investigate the stress field around the crack tip. The results are summarized as follows: 1. The caustic method is a useful technique to determine the stress intensity factor values of the specimens which have an oblique crack or various thickness and an open notch. 2. The conventional theory of measurement concerning this method is effective when the initial curve r0 is larger than the minimum initial curve r0min which was obtained in this study. It is observed that the values of r0min decrease as the ratio of KII to KI increases under mixed-mode loading, the one increases with an increase of thickness and notch opening angle. 3. The 3D stress field exists in the vicinity of crack tip; however, the stress state is nearly plane strain deformation in the case of mode I loading. In the case of mixed-mode loading, the stress state approximates to plane stress deformation as the ratio of KII to KI increases. 4. A method based on the distribution of the three-dimensional (3D) stress field is proposed to expediently yield the values of KI using the caustic method in the case of r0
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Determination of stress intensity factor by the method of caustics in anisotropic materials10.1007/BF02326471 ↗
2. Born · 1970 · 110
3. A note on stress intensity factors for single edge V-notched plates in tension10.1016/0013-7944(78)90073-5 ↗
4. Shadow Optical Method of Caustics
5. Precautions in determining mixed-mode stress intensity factor by caustics10.1007/BF00035031 ↗
6. Investigation of the rupture of plexiglass plate by means of an optical method involving high-speed filming of the shadows originating around holes drilled in the plate10.1007/BF00184557 ↗
7. Nishitani · 1987 · 167
8. Papadopoulos · 1993 · 30
9. Stress intensity factors at V-notched elastic, symmetrically loaded, plates by the method of caustics10.1088/0022-3727/13/6/014 ↗
10. On crack-tip stress state: an experimental evaluation of three-dimensional effects10.1016/0020-7683(86)90002-8 ↗
11. Crack-tip caustics in mechanically anisotropic materials10.1007/BF02325831 ↗
12. A technique for measuring optical constant10.1299/kikaia.55.2342 ↗
13. Effect of stress singularity by open notch on caustic method
14. Analysis of singular stress for regular polygonal cavity or rigid inclusion under in-plane and out-of-plane loading10.1299/kikaia.61.326 ↗
15. A determination of the dynamic stress intensity factor of zirconium ceramic plates by direct surface reflection caustics10.1299/kikaia.58.775 ↗
16. Local yielding around a crack tip in plexiglass10.1115/1.3408521 ↗