Influence of tooth brushing on adhesion strength of orthodontic brackets bonded to porcelain
Source abstract
Abstract
Background: Adhesive resin composite, which is used to bond orthodontic bracket to tooth surface is exposed to the influence of wear by tooth brushing and wear may influence loosening of the bracket. Objective: The aim of this study was to evaluate in vitro the effect of tooth brushing on the adhesion strength of orthodontic brackets bonded to surface treated porcelain. Method: A total of 90 glazed porcelain fused to metal facets (PFM) were randomly assigned into 3 groups according to the surface treatment to be received. Group 1 was conditioned with hydrofluoric acid (HF), group 2 conditioned with grit-blasting (GB) and group 3 conditioned with tribochemical silica coating (RC). The groups were evaluated for surface roughness ( {R}a ) before and after surface treatment. Next, 15 samples from each group were subjected to brushing and remaining 15 samples served as the baseline ( n=15 ). Adhesion strength (shear bond strength)was recorded using a universal testing machine. Data collected were analyzed by ANOVA and Tukey’s multiple comparison post hoc analysis. Results: Tooth brushing decreased the bond strength in all groups. The highest adhesion strength (baseline and after brushing) was observed in group 3 (26.8 ± 1.77 MPa and 23.57 ± 1.02 MPa) and the lowest was found in group 1 (9.6 ± 1.5 MPa and 5.87 ± 0.77 MPa). Group 3 specimens exhibited the highest {R}a (1.24 ± 0.08). Conclusion: It was found that tooth brushing of the exposed adhesive resin composite at the bracket-bonding substrate interface lowers the bonding strength regardless of the surface treatment of the substrate.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Orthodontics and Dentofacial Orthopedics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
King Saud University
University of Turku
Al Azhar University
General Dentist, Private Dental Practice, Riyadh, Kingdom of Saudi Arabia.
References (34)
Show source-provided references
1. FaltermeierA. ReichenederC. GötzfriedP. and ProffP., Bonding orthodontic ceramic brackets to ceramic restorations: Evaluation of different surface conditioning methods, Mater. Sci. Appl. 44(7B) (2013), 10–14.
2. 10.1016/0889-5406(88)90034-010.1016/0889-5406(88)90034-0 ↗
3. 10.1093/ejo/cjr03410.1093/ejo/cjr034 ↗
4. AjlouniR. BisharaS.E. OonsombatC. SolimanM. and LaffoonJ., The effect of porcelain surface conditioning on bonding orthodontic brackets, Angle Orthod. 75(5) (2005), 858–864.
5. 10.2319/030211-151.110.2319/030211-151.1 ↗
6. 10.1067/mod.2001.11365510.1067/mod.2001.113655 ↗
7. 10.1093/ejo/cjq13210.1093/ejo/cjq132 ↗
8. 10.1007/s10103-013-1458-310.1007/s10103-013-1458-3 ↗
9. 10.1016/S0109-5641(97)80008-510.1016/S0109-5641(97)80008-5 ↗
10. 10.1093/ejo/cjm03210.1093/ejo/cjm032 ↗
11. 10.1016/j.ajodo.2004.02.02110.1016/j.ajodo.2004.02.021 ↗
12. 10.1016/j.ajodo.2006.12.00610.1016/j.ajodo.2006.12.006 ↗
13. 10.1016/0889-5406(88)90132-110.1016/0889-5406(88)90132-1 ↗
14. BessingC. and WiktorssonA., Comparison of two different methods of polishing porcelain, Scand. J. Dent. Res. 91(6) (1983), 482–487.
15. 10.1016/S0889-5406(02)56911-010.1016/S0889-5406(02)56911-0 ↗
16. 10.1067/mpr.2000.10744210.1067/mpr.2000.107442 ↗
17. HickmanJ. MillettD.T. SanderL. et al., Powered vs manual tooth brushing in fixed appliance patients: A short term randomized clinical trial, Angle Orthod. 72(2) (2002), 135–140.
18. YaacobM. WorthingtonH.V. DeaconS.A. et al. Powered versus manual toothbrushing for oral health Cochrane Database Syst. Rev. 17(6) (2014).10.1002/14651858.CD002281.pub3 ↗
19. 10.1590/S1806-8324201000030001010.1590/S1806-83242010000300010 ↗
20. 10.1016/S0889-5406(99)70316-110.1016/S0889-5406(99)70316-1 ↗
21. Garcia-GodoyF. and de JagerM., Effect of manual and powered toothbrushes on orthodontic bracket bond strength, Am. J. Dent. 20(2) (2007), 90–92.
22. 10.1067/mod.2001.11640210.1067/mod.2001.116402 ↗
23. Test methods for shear bond strength of adhesives for orthodontic attachments – Part 1: Bonding of the interfacial surfaces adhesive-attachment and adhesive-enamel. ISO standards-13990-2D:Beuth Berlin 2009.
24. 10.1016/0002-9416(84)90190-810.1016/0002-9416(84)90190-8 ↗
25. 10.1016/S0889-5406(98)70183-010.1016/S0889-5406(98)70183-0 ↗
26. 10.5005/jp-journals-10024-117410.5005/jp-journals-10024-1174 ↗
27. 10.1016/0109-5641(92)90092-Q10.1016/0109-5641(92)90092-Q ↗
28. 10.1007/s10856-005-6442-410.1007/s10856-005-6442-4 ↗
29. 10.1007/s10856-006-6324-410.1007/s10856-006-6324-4 ↗
30. 10.1080/0001635070145975310.1080/00016350701459753 ↗
31. 10.1016/j.dental.2005.11.03510.1016/j.dental.2005.11.035 ↗
32. 10.1016/j.jdent.2006.01.00810.1016/j.jdent.2006.01.008 ↗
33. ChaiY. LinH. ZhengG. et al., Evaluation of the micro-shear bond strength of four adhesive systems to dentin with and without adhesive area limitation, Biomed. Mater. Eng. 26(Suppl. 1) (2015), S63–S72.
34. 10.1016/0022-3913(94)90553-310.1016/0022-3913(94)90553-3 ↗