A novel study on microstructure and crystallographic characteristics of Cu-Cr-Zr alloy manufactured by laser powder bed fusion
Source abstract
Abstract
This work systematically investigated and discussed the differences in microstructure and crystallographic characteristics between the horizontal and vertical directions of the Cu-Cr-Zr alloy prepared by laser powder bed fusion (LPBF) and analyzed the formation mechanism of the subgrains . A sample with a relative density close to full density (99.63 ± 0.1%) was prepared. Strong texture existed parallel to building direction of < 110 > , and large geometrically necessary dislocations (GNDs) density were distributed within the grains. The proportion of large-angle grain boundaries was about 12% higher than that in the building direction due to the larger number of fine grains in the horizontal direction, and the average grain size was reduced by twice. Further stable subgrains (∼368 ± 99 nm) were attributed to substructure induced by dislocation networks, which was mainly the combined effect of large residual stress, low stacking fault energy , and internal heat treatment effects.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. On the role of laser in situ re-melting into pore elimination of Ti-6Al-4V components fabricated by selective laser melting10.1016/j.jallcom.2020.156866 ↗
2. State-of-the-art of selective laser melting process: a comprehensive review10.1016/j.jmsy.2022.04.002 ↗
3. The simultaneous improvement of strength and ductility of the 93W-4.6Ni-2.4Fe prepared by AM via optimizing sintering post-treatment
4. Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis10.1016/j.matdes.2018.01.022 ↗
5. AM of metals10.1016/j.actamat.2016.07.019 ↗
6. Critical role of subgrain orientation on the stability of mechanical properties of selective laser melting manufactured alloys10.1016/j.msea.2021.142505 ↗
7. Selective laser melting of dispersed TiC particles strengthened 316L stainless steel10.1016/j.compositesb.2020.108291 ↗
8. Y. Wang, W. Guo, Y.K. Xie, H.X. Li, C.Y. Zeng, M. Xu, H.Q. Zhang, In-situ monitoring plume, spattering behavior and revealing their relationship with melt flow in laser powder bed fusion of nickel-based superalloy, J. Mater. Sci. Technol. 177(2024)44-58.10.1016/j.jmst.2023.07.068 ↗
9. Microstructure and mechanical properties of additive manufactured copper alloy10.1016/j.matlet.2016.05.064 ↗
10. Development of CuCrZr via electron beam powder bed fusion (EB-PBF)10.1016/j.jnucmat.2021.152841 ↗
11. Precipitation in a Cu-Cr-Zr-Mg alloy during aging10.1016/j.matchar.2013.04.008 ↗
12. Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion10.1016/j.msea.2018.12.017 ↗
13. Selective laser melting of Cu-Cr-Zr copper alloy: parameter optimization, microstructure and mechanical properties10.1016/j.jallcom.2020.154350 ↗
14. Effect of scanning strategy on the anisotropy in microstructure and properties of Cu-Cr-Zr alloy manufactured by laser powder bed fusion10.1016/j.jallcom.2022.167111 ↗
15. High-fidelity modelling of selective laser melting copper alloy: laser reflection behavior and thermal-fluid dynamics10.1016/j.matdes.2021.109857 ↗
16. Study of thermal behavior and microstructure formation mechanism of CuCrZr alloy melted by laser powder bed fusion, Mater
17. A study on the mechanical and electrical properties of high-strength CuCrZr alloy fabricated using laser powder bed fusion10.1016/j.jallcom.2022.166627 ↗
18. The enhancement of laser absorptivity and properties in laser powder bed fusion manufactured Cu-Cr-Zr alloy by employing Y2O3 coated powder as precursor10.1016/j.jallcom.2022.167111 ↗
19. A study on the mechanical and electrical properties of high-strength CuCrZr alloy fabricated using laser powder bed fusion10.1016/j.jallcom.2022.166627 ↗
20. The effect of build orientations on mechanical and thermal properties on CuCrZr alloys fabricated by laser powder bed fusion10.1016/j.jmrt.2023.01.218 ↗
21. On the role of melt flow into the surface structure and porosity development during selective laser melting10.1016/j.actamat.2015.06.004 ↗
22. Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion10.1016/j.msea.2019.138081 ↗
23. Additively manufactured CuCrZr alloy: Microstructure, mechanical properties and machinability10.1016/j.msea.2021.141528 ↗
24. Recent advances in EBSD characterization of metals10.3390/met10081097 ↗
25. Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder10.1007/s00170-018-1891-3 ↗
26. Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement10.1016/j.scriptamat.2020.09.023 ↗
27. Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment10.1016/j.scriptamat.2020.01.027 ↗
28. Effects of radiative local heating on metal solidification during selective laser melting for additive manufacturing10.1016/j.apsusc.2019.143594 ↗
29. Influence of carbon contents on the cryogenic mechanical properties of precipitation-hardened CrMnFeCoNi high-entropy alloys manufactured by laser powder bed fusion10.1016/j.msea.2023.145042 ↗
30. Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering10.1016/j.matdes.2021.110246 ↗
31. Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser melting
32. Residual stresses in selective laser sintering and selective laser melting10.1108/13552540610707013 ↗
33. Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies10.1016/j.msea.2016.03.036 ↗