journal article·2021-12

Electrical and hysteric properties of organic compound-based humidity sensor and its dualistic interactive approach to H2O molecules

Muneeb ur Rahman, Hina Gul, Zia ur Rahman, Syed Zulfiqar, Rajwali Khan, Burhan Ullah, Iftikhar Ahmad, Aamer Saeed, Khalid Alamgir, Mateen Ullah, Jiandong Fan

Publisher page

Abstract

Abstract The compound lophine, 2, 4, 5-triphenyl-1 H-imidazole, has been used to fabricate humidity sensors. The sensors were tested in different humidity environments, and at various applied frequencies. The SEM images showed inter-woven spiky needles, pores, pore-channels of diverse shapes and sizes. The H2O molecules interacted with N and NH sites in the aromatic ring of the compound and thus altered the electrical properties due to the imidazole scaffold’s electron acceptor and trifling donating nature. The conduction mechanism is based on Grotthuss hydroxide transfer and prototropic mobility. The calculated dielectric constant of the material was 1.69. In 45–95%RH limit, the device's capacitance was increased from 11 pF to 460 pF and 7.29 pF to 18.9 pF at applied frequencies 1 kHz and 10 kHz, respectively. The response/recovery time was 39/20 s, respectively. The maximum hysteresis was 0.44% (at 1 kHz) and 1.09% (at 10 kHz). The R2 values (goodness of fit) 0.98 and 0.99 for chemisorbed and multi-layered physisorbed layers are close to unity and thus considered the best linear-fit. The sensors showed a strong affinity to moisture at ambient conditions with low hysteresis. Fabulous improvement in the device’s sensitivity has been noted over the reported sensitivity of devices based on ceramic materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Spinel ferrrite oxide semiconductor gas sensors10.1016/j.snb.2015.08.027 ↗
2. Layered SAW gas sensor based on CSA synthesized polyaniline nanofiber on AlN on 64° YX LiNbO3 for H2 sensing10.1016/j.snb.2009.01.072 ↗
3. Synthesis and evaluation of a new polysiloxane as SAW sensor coatings for DMMP detection10.1016/j.snb.2008.05.016 ↗
4. Cross linked and quaternized poly(4vinylpyridine)/polypyrrole composite as a potential candidate for the detection of low humidity10.1016/j.talanta.2007.11.032 ↗
5. Polypyrrole nanofiber surface acoustic wave gas sensors10.1016/j.snb.2008.06.030 ↗
6. Poly(4vinylpyridine)/carbon black composite as a humidity sensor10.1016/j.snb.2006.09.057 ↗
7. Gas-detecting properties of surface acoustic wave ammonia sensors10.1016/j.snb.2003.07.016 ↗
8. Sensitivity of a platinum–polyyne-based sensor to low relative humidity and chemical vapors10.1063/1.1489095 ↗
9. Surface acoustic wave probe for chemical analysis. I. Introduction and instrument description10.1021/ac50045a024 ↗
10. SAW sensors for the room temperature measurement of CO2 and relative humidity10.1021/ac971095z ↗
11. Improved acetone sensing properties of flat sensors based on Co-SnO2 composite nanofibers10.1007/s11434-011-4558-0 ↗
12. Humidity sensor based on multi-walled carbon nanotubes thin films
13. Impedimetric humidity sensor based on α-Fe2O3 nanoparticles10.1080/20550308.2015.1133101 ↗
14. Preparation of Zn-doped TiO2 nantotubes electrode and its application in pentachlorophenol photoelectrocatalytic degradation10.1007/s11434-007-0170-8 ↗
15. Synthesis and humidity sensing properties of conducting polymer (N-methyl aniline) doped with different acids10.1016/j.snb.2005.08.031 ↗
16. A new 3D cupric coordination polymer as chemiresistor humidity sensor: narrow hysteresis, high sensitivity, fast response and recovery10.1007/s11426-017-9079-5 ↗
17. Highly sensitive humidity sensor based on amorphous A l2O3 nanotubes10.1039/C0JM02753G ↗
18. Humidity sensing properties of (Ba, Sr) TiO3 thin films grown by hydrothermal–electrochemical method
19. Resistive‑ and capacitive‑type humidity and temperature sensors based on a novel caged nickel sulfide for environmental monitoring10.1007/s10854-020-02904-y ↗
20. Comparison of porous silicon, porous polysilicon and porous silicon carbide as materials for humidity sensing applications10.1016/S0924-4247(01)00885-8 ↗
21. Impedimetric humidity sensor based on the use of SnO2–Co3O4 spheres10.1007/s10854-016-6049-1 ↗
22. Colorimetric humidity sensors based on electrospun polyamide/CoCl2 nanofibrous membranes10.1186/s11671-017-2139-0 ↗
23. A humidity sensor based on KCl-doped SnO2 nanofibers10.1016/j.snb.2009.02.027 ↗
24. Synthesis and pharmacological evaluation of 2-(4-Halosubstituted phenyl)-4,5-diphenyl-1H-imidazoles
25. Vibrational spectroscopic study of brazilin and brazilein, the main constituents of brazilwood from Brazil10.1016/S0924-2031(01)00138-2 ↗
26. Highly sensitive BEHP-co-MEH:PPV + poly(acrylic acid)partial sodium salt based relative humidity sensor10.1016/j.snb.2017.02.162 ↗
27. High dielectric constant conjugated materials for organic photovoltaics10.1039/C7TA06808E ↗
28. Vibrational mode contribution to the dielectric permittivity of disordered small-molecule organic semiconductors
29. Hydrophilic and hydrophobic interactions in concentrated aqueous imidazole solutions: a neutron diffraction and total X-ray scattering study10.1039/C9CP05993H ↗
30. Communication: where does the first water molecule go in imidazole?10.1063/1.3624841 ↗
31. Ultrahigh humidity sensitivity of graphene oxide10.1038/srep02714 ↗
32. Proton conductance and the existence of the H3O ion10.1063/1.1742619 ↗
33. High-sensitivity humidity sensor based on a single SnO2 nanowire10.1021/ja070788m ↗
34. Capacitive humidity-sensing properties of Zn2SiO4 film grown on silicon nanoporous pillar array10.1016/j.apsusc.2013.02.045 ↗
35. Humidity sensitive properties of electronically conductive poly(diphenylamine sulfonic acid) and its block copolymer and blends10.1016/S1452-3981(23)14388-4 ↗
36. Polyaniline-titanium dioxide composite as humidity sensor at room temperature
37. Bio-compatible organic humidity sensor based on natural inner egg shell membrane with multilayer crosslinked fiber structure10.1038/s41598-019-42337-0 ↗
38. High performance humidity sensors based on CeO2 nanoparticles10.1016/j.snb.2015.03.051 ↗
39. Development of high-performance bismuth sulfide nanobelts humidity sensor and effect of humid environment on its transport properties10.1021/acsomega.8b01854 ↗
40. Stable and fast-response capacitive humidity sensors based on a ZnO nanopowder/PVP-RGO multilayer10.3390/s17102415 ↗
41. Capacitive humidity sensors based on zinc oxide nanorods grown on silicon nanowires array at room temperature10.1016/j.sna.2015.10.020 ↗
42. Humidity sensing properties of transparent sputter-coated ITO and printed polymer structure10.1109/JSEN.2018.2858021 ↗
43. Compositional engineering of the pi-conjugated small molecular VOPcPhO: Alq3 complex to boost humidity sensing10.1039/C7RA02525D ↗
44. Design and development for capacitive humidity sensor applications of lead-free Ca, Mg, Fe, Ti-oxides based electro-ceramics with improved sensing properties via physisorption10.3390/s16071135 ↗
45. Capacitive humidity sensing properties of sic nanowires grown on silicon nanoporous pillar array10.1016/j.snb.2012.02.087 ↗
46. A novel humidity sensor based on alumina nanowire films10.1088/0022-3727/45/22/225305 ↗
47. Porous ZnAl2O4 spinel nanorods: high sensitivity humidity sensors10.1016/j.ceramint.2013.02.077 ↗