Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding
Source abstract
Abstract
The presented research focused on the metallization of polyester, cotton, and polyamide 6.6 fabrics using the silver conductive complex to allow electric conductivity through the fabric's surface and enhance the fabric's mechanical properties. The method used for the metallization of studied fabrics does not require the use of expensive toxic chemicals or electricity, making the process more economically acceptable. The signal attenuation was measured in frequency ranges of 1–4 and 5–12 GHz. After five cycles of metallization, the polyester fabric has higher EMI effectiveness, in a lower range was 45.44 and 57.25 dB. X-ray powder diffractometry (XRD) and infrared spectroscopy with Fourier transform infrared spectrophotometry (FT-IR) characterize the modified tissues. Scanning electron microscopy coupled with energy-dispersion spectroscopy (SEM-EDS) was used to determine layers' morphology and elemental composition. Also, the water and air permeability of modified textiles was determined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Sensor and Energy Harvesting Materials · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Are contemporary smartwatches and mobile phones safe for patients with cardiovascular implantable electronic devices?
2. Electromagnetic interference of using 24Vdc current control buck converter for medical light emitting diode10.1016/j.egyr.2020.11.026 ↗
3. External physical and technical influences on medical devices for diabetes therapy
4. In vivo study of electromagnetic interference with pacemakers caused by everyday electric and magnetic fields10.1161/CIRCULATIONAHA.116.024558 ↗
5. Occupational exposure to electromagnetic fields and health surveillance according to the european directive 2013/35/eu10.3390/ijerph18041730 ↗
6. Statement by the American Association of Clinical Endocrinologists consensus panel on insulin pump management10.4158/EP.16.5.746 ↗
7. Wireless corrosion monitoring sensors based on electromagnetic interference shielding of RFID transponders10.5006/3384 ↗
8. Modeling and suppression of electromagnetic interference noise on motor resolver of electric vehicle10.1109/TEMC.2020.3023088 ↗
9. The mining method of anti-electromagnetic interference for electronic equipment in coal mine by considering network communication technology10.1016/j.mejo.2020.104987 ↗
10. Physical simulation of the interference immunity of electronic equipment under the electromagnetic action of industrial macrosources10.1134/S1064226918010060 ↗
11. Fabrication and application of electrically conducting composites for electromagnetic interference shielding of remotely piloted aircraft systems10.1016/j.compstruct.2019.111498 ↗
12. A lightweight and conductive MXene/graphene hybrid foam for superior electromagnetic interference shielding10.1016/j.cej.2019.122696 ↗
13. State responsibility for exogenous interference with air navigation: some legal and regulatory issues10.54648/AILA2018005 ↗
14. Nanostructured composite materials for electromagnetic interference shielding applications10.1016/j.actaastro.2011.06.004 ↗
15. Microwave shielding behaviour of polypyrrole impregnated fabrics10.1016/j.compositesb.2019.107093 ↗
16. On diffraction and radiation of electromagnetic waves10.1103/PhysRev.56.308 ↗
17. Incapsulation of γ-Fe2O3 decorated reduced graphene oxide in polyaniline core-shell tubes as an exceptional tracker for electromagnetic environmental pollution10.1039/C3TA14212D ↗
18. Multilayer structures of a Zn0.5Ni0.5Fe2O4-Reduced graphene oxide/PVDF nanocomposite for tunable and highly efficient microwave absorbers10.1021/acsaelm.1c00940 ↗
19. Electromagnetic interference shielding of 2D transition metal carbide (Mxene)/metal ion composites10.3390/nano11112929 ↗
20. Low percolation 3D Cu and Ag shell network composites for EMI shielding and thermal conduction
21. Fe nanoparticles and CNTs co-decorated porous carbon / graphene foam composite for excellent electromagnetic interference shielding performance10.1016/j.jallcom.2019.153108 ↗
22. A novel modified expanded graphite/epoxy 3D composite with ultrahigh thermal conductivity10.1016/j.cej.2021.133519 ↗
23. Electromagnetic interference shielding behavior of hybrid carbon nanotube/exfoliated graphite nanoplatelet coated glass fiber composites10.1016/j.mseb.2019.114403 ↗
24. Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding10.1016/j.pmatsci.2019.02.003 ↗
25. The effect of filler morphology and distribution on electrical and shielding properties of graphite-epoxy composites10.1080/15421406.2011.538335 ↗
26. Ultra-light MXene/CNTs/PI aerogel with neat arrangement for electromagnetic wave absorption and photothermal conversion10.1016/j.compositesa.2022.106986 ↗
27. Electromagnetic shielding response of magnetite elastomeric composites: source and filler content dependence
28. Hybrid polymer nanocomposites as EMI shielding materials in the X-band10.1016/j.matpr.2019.12.300 ↗
29. Highly efficient low cost EMI shielding by barium ferrite encapsulated polythiophene nanocomposite10.1016/j.jallcom.2018.11.307 ↗
30. X-band shielding of electromagnetic interference (EMI) by Co2Y barium hexaferrite, bismuth copper titanate (BCTO), and polyaniline (PANI) composite
31. Antistatic and microwave shielding performance of polythiophene-graphene grafted 3-dimensional carbon fibre composite10.1016/j.diamond.2020.107871 ↗
32. Enhanced thermal conductivity of graphene nanoplatelet filled polymer composite based on thermal percolation behavior10.1016/j.coco.2022.101110 ↗
33. Development of an electromagnetic wave shielding textile by electroless Ni-Based alloy plating10.1109/TMAG.2009.2021403 ↗
34. Multifunctional MXene/natural rubber composite films with exceptional flexibility and durability10.1016/j.compositesb.2020.107875 ↗
35. A room-temperature high-conductivity metal printing paradigm with visible-light projection lithography10.1002/adfm.201807615 ↗
36. High yield production of 3D graphene powders by thermal chemical vapor deposition and application as highly efficient conductive additive of lithium ion battery electrodes10.1016/j.carbon.2021.01.128 ↗
37. Highly conductive flexible ultra thin ITO nanoclusters prepared by 3-D confined magnetron sputtering at a low temperature10.1016/j.scriptamat.2018.02.018 ↗
38. Copper electroless plating of cotton fabrics after surface activation with deposition of silver and copper nanoparticles10.1016/j.jpcs.2019.109181 ↗
39. Strategy toward stretchable fiber conductors by dry spinning10.1002/aelm.201800462 ↗
40. Flexible and conductive ITO electrode made on cellulose film by spin-coating10.1016/j.synthmet.2012.09.005 ↗
41. Printable elastic conductors with a high conductivity for electronic textile applications10.1038/ncomms8461 ↗
42. Multispectral electromagnetic shielding and mechanical properties of carbon fabrics reinforced by silver deposition10.1016/j.matchemphys.2022.126495 ↗
43. Low temperature sintering nano-silver conductive ink printed on cotton fabric as printed electronics10.1016/j.porgcoat.2016.08.019 ↗
44. Ink-jet printing of particle-free silver inks on fabrics with a superhydrophobic protection layer for fabrication of robust electrochemical sensors10.1016/j.microc.2021.106038 ↗
45. Fabrication of plasmonically active substrates using engineered silver nanostructures for SERS applications10.1021/acsami.7b12279 ↗
46. High-electromagnetic-shielding cotton fabric prepared using multiwall carbon nanotubes/nickel–phosphorus electroless plating10.1002/aoc.5434 ↗