journal article·2021-03

Thermal decomposition behavior of thin Makino bamboo (Phyllostachys makinoi) slivers under nitrogen atmosphere

Teng-Chun Yang, Yu-Hsuan Yang, Chin-Hao Yeh

Publisher page

Abstract

Abstract The present study investigated the effects of heat treatment on the thermal decomposition behavior (changes in the chemical composition and color, strain variation, and tensile properties) of a thin Makino bamboo (Phyllostachys makinoi) sliver. The performances, reactions, and formations in heat treated bamboo slivers were measured by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). The results indicated that a high thermal stability, cross-linking of lignin condensation, hemicellulose deacetylation, and an increase in cellulose crystallinity were observed. In addition, the bamboo slivers after heat treatment had a higher Poisson’s ratio due to a decrease in the ductility in the loading direction and an increase in the transverse shrinkage. Furthermore, using isothermal dynamic mechanical analysis (DMA), the normalized storage modulus of the bamboo slivers rapidly decreased when the treatment temperature exceeded 220 °C. According to first-order thermal decomposition kinetics by Arrhenius activation theory, the activation energy for thermal decomposition of the bamboo slivers was calculated to be 142.2 kJ/mol.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Effects of peeling and steam-heating treatment on basic properties of two types of bamboo culms (Phyllostachys makinoi and Phyllostachys pubescens)10.1007/s10086-017-1647-y ↗
2. Utilization of waste bamboo fibers in thermoplastic composites: influence of the chemical composition and thermal decomposition behavior10.3390/polym12030636 ↗
3. Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent10.1016/j.compositesa.2005.04.015 ↗
4. Mechanical properties and extended creep behavior of bamboo fiber reinforced recycled poly(lactic acid) composites using the time-temperature superposition principle10.1016/j.conbuildmat.2015.06.038 ↗
5. Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber10.1016/j.conbuildmat.2017.09.185 ↗
6. Engineered bamboo scrimber: influence of density on the mechanical and water absorption properties10.1016/j.conbuildmat.2016.10.069 ↗
7. Fabrication, material properties, and application of bamboo scrimber10.1007/s00226-014-0683-7 ↗
8. Effects of density and heat treatment on the physico-mechanical properties of unidirectional round bamboo stick boards (UBSBs) made of Makino bamboo (Phyllostachys makinoi)10.1016/j.conbuildmat.2018.07.182 ↗
9. Development of layered laminate bamboo composite and their mechanical properties10.1016/j.compositesb.2011.11.065 ↗
10. Effects of layered structure on the physical and mechanical properties of laminated moso bamboo (Phyllosachys edulis) flooring10.1016/j.conbuildmat.2011.08.038 ↗
11. Tensile properties of bamboo in different sizes10.1007/s10086-015-1511-x ↗
12. Nomenclature for engineered bamboo10.15376/biores.11.1.1141-1161 ↗
13. Development of bamboo winding composite pipe (BWCP) and its compression properties10.15376/biores.14.3.5875-5882 ↗
14. Fatigue and fracture properties of laminated bamboo strips from Gigantochloa scortechinii polyester composites10.15376/biores.11.4.9142-9153 ↗
15. Tensile properties and mechanism of laser-cut bamboo slivers10.15376/biores.14.2.4708-4720 ↗
16. Effect of heat treatment using palm oil on properties and durability of Semantan bamboo10.1163/156915905774310034 ↗
17. Effects of hot oil treatment on physical and mechanical properties of three species of Philippine bamboo
18. Effect of oil heat treatment on physical properties of Semantan bamboo10.5539/mas.v4n2p107 ↗
19. Effects of steam treatment on bending properties and chemical composition of Moso bamboo (Phyllostachys pubescens)
20. The effects pf thermal modification on the properties of two Vietnamese bamboo species, part I: effects on physical properties10.15376/biores.7.4.5355-5366 ↗
21. Effect of thermal treatment on the physical and mechanical properties of Phyllostachys pubescen bamboo10.1007/s00107-012-0643-6 ↗
22. Effects of different thermal modification media on physical and mechanical properties of moso bamboo10.1016/j.conbuildmat.2016.04.156 ↗
23. Effects of thermal modification on the surface and chemical properties of moso bamboo10.1016/j.conbuildmat.2018.05.099 ↗
24. Pyrolysis of wood/biomass for bio-oil: a critical review10.1021/ef0502397 ↗
25. Characterization and analysis of torrified wood10.1007/BF00355850 ↗
26. Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies10.1081/WCT-120035941 ↗
27. Investigation of wood wettability changes during heat treatment on the basis of chemical analysis10.1016/j.polymdegradstab.2004.10.017 ↗
28. Chemical analysis of heat-treated softwoods10.1007/s00107-005-0078-4 ↗
29. Effects of heat treatment on surface color of moso bamboo timber
30. Thermal degradation of wood and cellulose10.1021/ie51398a022 ↗
31. Thermal degradation of cellulose in air and nitrogen at low temperatures10.1002/app.1979.070230513 ↗
32. Thermal degradation of wood treated with flame retardants10.1007/s10973-005-7225-3 ↗
33. Color changes in wood during heating: kinetic analysis by applying a time-temperature superposition method10.1007/s00339-010-5542-2 ↗
34. Thermal degradation of bending strength of plywood and oriented strand board: a kinetics approach10.1007/s00226-010-0329-3 ↗
35. Effects of annealing time and temperature on the crystallinity and heat resistance behavior of injection-molded poly(lactic acid)10.1002/pen.23304 ↗
36. Thermal decomposition of wood: influence of wood components and cellulose crystallite size10.1016/j.biortech.2011.11.122 ↗
37. Estimation of the size and internal structure of colloidal particles by means of röntgen
38. Kinetics models for thermal degradation of strength of fire-retardant-treated wood
39. Effects of heat treatment on the chemical compositions and thermal decomposition kinetics of Japanese cedar and beech wood10.1016/j.polymdegradstab.2018.11.003 ↗
40. Characteristics of hemicellulose, cellulose and lignin pyrolysis10.1016/j.fuel.2006.12.013 ↗
41. A review of wood thermal pretreatments to improve composites properties10.1007/s00226-013-0574-3 ↗
42. Effect of heat treatment on the chemical composition and mechanical properties of birch and aspen10.15376/biores.3.2.517-537 ↗
43. The effects of heat treatment on technological properties in Red-bud maple (Acer trautvetteri Medw.) wood10.1016/j.biortech.2007.04.021 ↗
44. Pyrolysis kinetics of lignocellulosic materials–three independent reactions model10.1016/S0016-2361(98)00156-2 ↗
45. Structural analysis of photo-degraded wood by means of FTIR spectroscopy10.1016/S0141-3910(03)00051-X ↗
46. Relations between chemical changes and mechanical properties of thermally treated wood10.1515/HF.2009.084 ↗
47. A review on biomass torrefaction process and product properties for energy applications10.1089/ind.2011.7.384 ↗
48. Crystalline structure of heat-treated Scots pine [Pinus sylvestris L.] and Uludağ fir [Abies nordmanniana (Stev.) subsp. bornmuelleriana (Mattf.)] wood10.1007/s00226-006-0110-9 ↗
49. Biofibres and biocomposites10.1016/j.carbpol.2007.05.040 ↗
50. Wood modification by heat treatment: a review10.15376/biores.4.1.Esteves ↗
51. Influence of thermal modification on colour of Poplar (Populus x euramericana) rotary cut veneer
52. 2004
53. The color measurement: a fast method to study and to optimize the chemical transformations undergone in the thermally treated wood10.1515/hfsg.1991.45.5.377 ↗
54. Study on the deactylation of hemicelluloses during the hydrothermal processing of Eucalyptus wood10.1007/s001070050473 ↗
55. Effects of steaming process on some properties of eucalyptus particleboard bonded with UF and MUF adhesives10.1016/j.buildenv.2005.08.013 ↗
56. Characterisation of thermally modified wood: molecular reasons for wood performance improvement10.1007/s001070050287 ↗
57. Magnetic resonance studies of thermally modified wood10.1515/HF.2002.098 ↗
58. Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood10.1007/s00226-006-0099-0 ↗
59. Bending strength and toughness of heat-treated wood10.1007/BF00779547 ↗
60. Color changes in wood during heating: kinetic analysis by applying a time-temperature superposition method10.1007/s00339-010-5542-2 ↗
61. Thermal degradation of cellulose in air and nitrogen at low temperatures10.1002/app.1979.070230513 ↗