Analytical and finite element analysis of stress concentration factors for polyvinylchloride reinforced with different types of short fibers
Source abstract
Abstract
Abstract The objective of the current research is to study the effect of a central circular hole as a stress raiser and to obtain the corresponding stress concentration factors for polyvinyl chloride (PVC) reinforced with different types of short fibers. Five different types of fibers were used: glass wool (GW), rock wool (RW), cotton wool (CW), and glass fiber with two types (YGT101 and E6-CR). The fibers of 5, 10, 15, 20, 30, 40, and 50% were used for sample preparation. On the other hand, two different types of samples were used: unnotched samples and notched samples with central holes of 1, 3, and 5 mm in diameter. Tensile tests were carried out on dog bone samples according to ASTM D638 using a universal tensile testing machine. The experimental results showed that the tensile strength of the PVC/fiber composites decreases with the increase of wt% of the fibers, whereas the PVC/E6-CR fiber composites displayed different behaviors. On the other hand, the results obtained for stress concentration factors from finite element analysis models and analytical methods showed that there is no effect for the types of fibers, and additionally, the stress concentration factors obtained from the different models were approximately the same, with differences not more than 10% for the same hole diameter.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Faculty of Engineering, Alexandria University , Alexandria , Egypt
References (28)
Show source-provided references
1. Ngo, T.-D., Introduction to composite materials, In Ngo, T.-D. ed. Composite and nanocomposite materials - From knowledge to industrial applications, Intechopen, Canada; 2020. pp. 1–2710.5772/intechopen.91285 ↗
2. Cyriac, A.J., Metal matrix composites: history, status, factors and future. Faculty of the Graduate College of the Oklahoma State University, USA; 2011
3. Mahdi, E., Dean, A., The effect of filler content on the tensile behavior of polypropylene/Cotton Fiber and poly (vinyl chloride)/cotton fiber composites, Materials, 2020, 13: 753. 10.3390/ma1303075310.3390/ma13030753 ↗
4. Kim, S.J., Moon, J.B., Kim, G.H., Ha, C.S., Mechanical properties of polypropylene/natural fiber composites: Comparison of wood fiber and cotton fiber, Polym. Test., 2008, 27: 801–806. 10.1016/j.polymertesting.2008.06.00210.1016/j.polymertesting.2008.06.002 ↗
5. Zhang, X., Li, K.Z., Li, H.J., Fu, Y.W., Fei, J., Tribological and mechanical properties of glass fiber reinforced paper-based composite friction material, Tribol. Int., 2014, 69: 156–167. 10.1016/j.triboint.2013.08.00310.1016/j.triboint.2013.08.003 ↗
6. Detomi, A.C., dos Santos, R.M., Ribeiro Filho, S.L., Martuscelli, C.C., Panzera, T.H., Scarpa, F., Statistical effects of using ceramic particles in glass fibre reinforced composites, Mater. Des., 2014, 55: 463–470. 10.1016/j.matdes.2013.09.02610.1016/j.matdes.2013.09.026 ↗
7. Park, S.B., Lee, J.S., Kim, J.W., Effects of short glass fibers on the mechanical properties of glass fiber fabric/PVC composites, Mater. Res. Express, 2017, 4: 035301. 10.1088/2053-1591/aa614210.1088/2053-1591/aa6142 ↗
8. Peterson, R.E., Pilkey, W.D., Peterson’s stress concentration factors. 2nd edn. John Wiley & Sons, INC. A Wiley-lnterscience Publication, New York, USA; 1997
9. Tan, S.C., Finite-width correction factors for anisotropic plate containing a central opening, J. Compos. Mater., 1988, 22: 1080–109710.1177/002199838802201105 ↗
10. Jones, R.M., Mechanics of composite materials. 2nd edn. Taylor & Francis, Inc., USA; 1999
11. Wu, H.C., Mu, B., On stress concentrations for isotropic/orthotropic plates and cylinders with a circular hole, Compos., Part B, 2003, 34(2): 127–13410.1016/S1359-8368(02)00097-5 ↗
12. Jain, N.K., Mittal, N.D., Finite element analysis for stress concentration and deflection in isotropic, orthotropic and laminated composite plates with central circular hole under transverse static loading, Mater. Sci. Eng., 2008, 498: 115–124. 10.1016/j.msea.2008.04.07810.1016/j.msea.2008.04.078 ↗
13. Darwish, F., Tashtoush, G., Gharaibeh, M., Stress concentration analysis for countersunk rivet holes in orthotropic plates. Eur. J. Mech., 2013, 37: 69–78. 10.1016/j.euromechsol.2012.04.00610.1016/j.euromechsol.2012.04.006 ↗
14. Pavan Kishore, M.L., Chandrashekhar, A., Avinash, M., Das, R., Stress analysis of rectangular and square plates with various cutout, Vibroeng Proc., 2019 March, 22: 165–169. 10.21595/vp.2018.2031110.21595/vp.2018.20311 ↗
15. Ankur, J., Stress concentration factor converts into stress intensity factor using ANSYS, IJSER, 2016, 7: 1662–1667
16. Pawar, P., Ballav, R.A., Kumar, A., Finite element method analysis of rectangular Plate with circular hole using ansys, Int. J. Chem. Sci., 2016, 14; 2787–2798. ISSN 0972-768X
17. Kadam, M., Kulkarni, V., Effect of Geometry of Opening on the Stress Concentration Factor for a Plate, Design, Manufacturing and Mechatronics, January 2014, ICDMM2014
18. Toubal, L., Karama, M., Lorrain, B., Stress concentration in a circular hole in composite plate, Compos. Struct. 2004, 68: 31–36. 10.1016/j.compstruct.2004.02.0110.1016/j.compstruct.2004.02.016 ↗
19. Shaik, A.S., Mirzana, I.M., Stress concentration of rectangular plate with a hole made with composite material using finite element analysis, IOSR-JMCE, 2016, 13(4): 1–5. 10.9790/1684-1304074010510.9790/1684-13040740105 ↗
20. Mohamed Makki, M., Chokri, B., Experimental, analytical, and finite element study of stress concentration factors for composite materials, J. Compos. Mater., 2016, 13: 1–12. 10.1177/0021998316659915
21. Zitoune, R., Crouzeix, L., Collombet, F., Tamine, T., Grunevald, Y.H., Behaviour of composite plates with drilled and moulded hole under tensile load, Compos. Struct., 2011, 93: 2384–2391. 10.1016/j.compstruct.2011.03.02710.1016/j.compstruct.2011.03.027 ↗
22. Mekalke, G.C., Kavade, M.V., Deshpande, S.S., Analysis of a plate with a circular hole by FEM, IOSR-JMCE, 2013 Jan: 25–30
23. Parle, D., Patil, A., Ambulgekar, A., Evaluation of stress concentration factor using ANSYS. Infosys Technologies Ltd., Pune, India; 2011 Oct
24. Suppliers data sheet websites (https://www.izocam.com.tr/en/products)
25. ASTM D 638, Standard test method for “Tensile properties of polymer matrix composite materials”, American society for Testing and Materials (ASTM) International, West Conshohocken, PA; 2000, www.astm.org
26. Mohamed, Y.S., Wan, B., Chang, L., Abdelbary, A., Experimental and numerical study of the effects of fiber orientation on stress concentration of CFRE, J. Reinf. Plast. Compos., 2024, 44: 1205–1215. 10.1177/0731684424123883410.1177/07316844241238834 ↗
27. Kumar, S.A., Rajesh, R., Pugazhendhi, S., A review of stress concentration studies on fibre composite panels with holes/cutouts, IJMSA, 2020, 234(11): 1461–1472. 10.1177/146442072094457110.1177/1464420720944571 ↗
28. Misbah, M.N., Ariesta, R.C., Yulianto, T., Setyawan, D., Putra, W.H.A., Study numerical and experimental of stress concentration factor on isotropic plate with hole, Mater. Phys. Mech., 2022, 48: 397–406. 10.18149/MPM.4832022_10