journal article·2025-09-01Open access

Enhancement of high-performance concrete properties with crushed dune sand addition: A sustainable approach for desert regions

Fatima Zahra Rennani, Said Zaouai, Abdelkadir Makani, Mohamed Rabehi, Rachid Rabehi, Amel Ali Alhussan, El-Sayed M. El-kenawy

Materials Science-Poland· Volume 43· Issue 3

Abstract

Abstract The construction industry faces mounting pressure to develop sustainable alternatives that maintain structural performance while reducing the environmental impact. This study investigates the potential of crushed dune sand (CDS) as a partial cement replacement in high-performance concrete (HPC) formulations. Desert regions possess abundant dune sand resources that, when mechanically processed, can serve as supplementary cementitious materials with minimal environmental footprint. The research examined concrete mixtures incorporating CDS and silica fume at replacement levels of 5, 10, and 15% by weight of cement. Comprehensive testing protocols evaluated fresh concrete properties, mechanical performance, durability characteristics, and microstructural development using scanning electron microscopy and X-ray diffraction analysis. Nondestructive testing methods including sclerometer measurements and ultrasonic pulse velocity (UPV) validated the experimental findings. Results demonstrated that 10% cement replacement with CDS achieved optimal performance, yielding 58.03 MPa compressive strength at 28 days compared to 52.1 MPa for reference concrete, representing an 11.4% improvement. Water-accessible porosity decreased from 8.1 to 7.2%, indicating enhanced durability potential. UPV increased by 12%, confirming improved material density and reduced void content. Environmental analysis revealed that CDS exhibits carbon dioxide emissions of only 0.0013 kg per kilogram of material and energy consumption of 0.017 MJ/kg, substantially lower than conventional supplementary materials. Microstructural examination confirmed that CDS enhances concrete through combined physical filler effects and pozzolanic reactions, creating denser interfacial transition zones and additional calcium silicate hydrate formation. The findings establish CDS as a viable, sustainable alternative for HPC production in arid regions, offering superior mechanical properties, enhanced durability, and significant environmental benefits compared to conventional approaches.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Microbial Applications in Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Civil Engineering and Sustainable Development Laboratory, Civil Engineering Department, University of Djelfa , 17000 , Djelfa , Algeria

Department of Civil Engineering and Hydraulic, TAHRI Mohamed University, EMIA ex LFGM (Laboratory of Eco-Materials: Innovations & Applications) , P. O. Box 417 , Bechar , 08000 , Algeria

Faculty of Civil Engineering, University of Science and Technology Houari Boumediene (USTHB), BP 32 El Alia, Bab Ezzouar , 16111 , Algiers , Algeria

Department of Computer Sciences, College of Computer and Information Sciences, Princess Nourah bint Abdulrahman University , P. O. Box 84428 , Riyadh , 11671 , Saudi Arabia

School of ICT, Faculty of Engineering, Design and Information & Communications Technology (EDICT), Bahrain Polytechnic , P. O. Box 33349 , Isa Town , Bahrain

Applied Science Research Center, Applied Science Private University , Amman , Jordan

References (39)

Show source-provided references
1. Mechtcherine, V., Schröfl, C., Reichardt, M., Klemm, A.J., Khayat, K.H., Recommendations of RILEM TC 260-RSC for using superabsorbent polymers (SAP) for improving freeze–thaw resistance of cement-based materials, Mater. Struct., 2019, 52: 75. 10.1617/s11527-019-1375-410.1617/s11527-019-1375-4 ↗
2. Surendran, H., Akhas, P.K., Properties of high-performance concrete incorporating toughened glass waste coarse aggregate: An experimental study, Structures, 2024, 60: 105897. 10.1016/j.istruc.2024.10589710.1016/j.istruc.2024.105897 ↗
3. Al Saffar, D.M., Al Saad, A.J.K., Tayeh, B.A., Effect of internal curing on behavior of high performance concrete: An overview, Case Stud. Constr. Mater., 2019, 10: e00229. 10.1016/j.cscm.2019.e0022910.1016/j.cscm.2019.e00229 ↗
4. Silva, M.L., Prado, L.P., Félix, E.F., Sousa, A.M., Aquino, D.P., The influence of materials on the mechanical properties of ultra-high-performance concrete (UHPC): a literature review, Materials, 2024, 17: 1801. 10.3390/ma1708180110.3390/ma17081801 ↗
5. Wu, H., Chen, G., Liu, C., Gao, J., Understanding the micro-macro properties of sustainable ultra-high performance concrete incorporating high-volume recycled brick powder as cement and silica fume replacement, Constr. Build. Mater., 2024, 448: 138170. 10.1016/j.conbuildmat.2024.13817010.1016/j.conbuildmat.2024.138170 ↗
6. Zhang, Y., Chang, J., Zhao, Q., Lam, W.L., Shen, P., Sun, Y., et al., Effect of dosage of silica fume on the macro-performance and micro/nanostructure of seawater Portland cement pastes prepared with an ultra-low water-to-binder ratio, Cem. Concr. Compos., 2022, 133: 104700. 10.1016/j.cemconcomp.2022.10470010.1016/j.cemconcomp.2022.104700 ↗
7. Wang, T., Fan, X., Gao, C., Strength, pore characteristics, and characterization of fly ash-slag-based geopolymer mortar modified with silica fume, Structures, 2024, 69: 107525. 10.1016/j.istruc.2024.10752510.1016/j.istruc.2024.107525 ↗
8. Amin, M.N., Ahmad, A., Shahzada, K., Khan, K., Jalal, F.E., Qadir, M.G., Mechanical and microstructural performance of concrete containing high-volume of bagasse ash and silica fume, Sci. Rep., 2022, 12: 5719. 10.1038/s41598-022-08749-110.1038/s41598-022-08749-1 ↗
9. Aivazyan, A.P., Monteiro, P.J., Kirchheim, A.P., Prinz, S., Mkrtchyan, V.P., Harutyunyan, V.S., Residual stress on ettringite crystals in mature Type K shrinkage-compensating cement pastes, Constr. Build. Mater., 2023, 401: 132892. 10.1016/j.conbuildmat.2023.13289210.1016/j.conbuildmat.2023.132892 ↗
10. Zhang, M., Zhu, X., Shi, J., Liu, B., He, Z., Liang, C., Utilization of desert sand in the production of sustainable cement-based materials: A critical review, Constr. Build. Mater., 2022, 327: 127014. 10.1016/j.conbuildmat.2022.12701410.1016/j.conbuildmat.2022.127014 ↗
11. Liu, H., Li, Q., Preparation of artificial aggregates from concrete slurry waste and waste brick masonry powder: CO2 uptake and performance evaluation, Constr. Build. Mater., 2023, 382: 131356. 10.1016/j.conbuildmat.2023.13135610.1016/j.conbuildmat.2023.131356 ↗
12. Reddy, Y.R., Nassar, A.H., Kangda, M.Z., Yashwanth, H.J., Khan, M.A., Asiri, A.N.M., et al., Symbiotic impact of carbon quantum dots on microstructural development and mechanical behaviour of cement mortars, Case Stud. Constr. Mater., 2024, 20: e03042. 10.1016/j.cscm.2024.e0304210.1016/j.cscm.2024.e03042 ↗
13. Vinothkumar, S., Pannem, R.M.R., The effect of temperature and sulphate attack on ternary blended self-compacting concrete, Mater. Today: Proc., 2023, 1: S2214785323030195. 10.1016/j.matpr.2023.05.38710.1016/j.matpr.2023.05.387 ↗
14. Kazmi, S.M.S., Munir, M.J., Wu, Y.F., Development of sustainable high-performance desert sand concrete: Engineering and environmental impacts of compression casting, Resources, Conserv. Recycling, 2025, 212: 108002. 10.1016/j.resconrec.2024.10800210.1016/j.resconrec.2024.108002 ↗
15. Hosseinnezhad, H., Sürmelioğlu, S., Çakır, Ö.A., Ramyar, K., A novel method for characterization of recycled concrete aggregates: Computerized microtomography, J. Build. Eng., 2023, 76: 107321. 10.1016/j.jobe.2023.10732110.1016/j.jobe.2023.107321 ↗
16. Tayeh, B.A., Akeed, M.H., Qaidi, S., Bakar, B.H.A., Influence of sand grain size distribution and supplementary cementitious materials on the compressive strength of ultrahigh-performance concrete, Case Stud. Constr. Mater., 2022, 17: e01495. 10.1016/j.cscm.2022.e0149510.1016/j.cscm.2022.e01495 ↗
17. Yu, D., Ni, H., Wang, L., Wu, M., Yang, X., Nanoscale-confined precursor of CuFe2O4 mediated by hyperbranched polyamide as an unusual heterogeneous Fenton catalyst for efficient dye degradation, J. Clean. Prod., 2018, 186: 146–154. 10.1016/j.jclepro.2018.03.13410.1016/j.jclepro.2018.03.134 ↗
18. Ahmed, S., Abed, F., Mannan, M.A., Compressive strength development of dune sand reactive powder concrete (RPC) under different curing conditions, IOP Conf. Ser.: Earth Environ. Sci., 2022, 1026: 012017. 10.1088/1755-1315/1026/1/01201710.1088/1755-1315/1026/1/012017 ↗
19. Tiwari, Y., Nandi, S., Manivannan, R., Chatterjee, D., Mukherjee, M., Rajinikanth, V., Investigating the influence of various tool path trajectories on the anisotropic behaviour of bulk NiCrMo-3 alloy fabrication by WADED process, Mater. Charact., 2024, 209: 113742. 10.1016/j.matchar.2024.11374210.1016/j.matchar.2024.113742 ↗
20. Caselles, L.D., Coumes, C.C.D, Antonucci, P., Rousselet, A., Mesbah, A., Montouillout, V., Chemical degradation of magnesium potassium phosphate cement pastes during leaching by demineralized water: Experimental investigation and modeling, Cem. Concr. Res., 2024, 178: 107456. 10.1016/j.cemconres.2024.10745610.1016/j.cemconres.2024.107456 ↗
21. Farahzadi, L., Bozorgmehr Nia, S., Shafei, B., Kioumarsi, M., Sustainability assessment of ultra-high performance concrete made with various supplementary cementitious materials, Clean. Mater., 2025, 15: 100301. 10.1016/j.clema.2025.10030110.1016/j.clema.2025.100301 ↗
22. Zandifaez, P., Shen, Z., Sorgenfrei, R., Li, Y., Dias-da-Costa, D., Zhou, H., Pathways to formulate lightweight and ultra-lightweight 3D printable cementitious composites, Constr. Build. Mater., 2024, 424: 135874. 10.1016/j.conbuildmat.2024.13587410.1016/j.conbuildmat.2024.135874 ↗
23. Sindhurashmi, B.M., Nayak, G., Adesh, N.D., Rao, V., Dubey, S.P., Incorporating sea sand into self-compacting concrete: a systematic review, Discov. Appl. Sci., 2024, 6: 194. 10.1007/s42452-024-05826-010.1007/s42452-024-05826-0 ↗
24. Hamada, H.M., Abed, F., Al-Sadoon, Z.A., Elnassar, Z., Hassan, A., The use of treated desert sand in sustainable concrete: A mechanical and microstructure study, J. Build. Eng., 2023, 79: 107843. 10.1016/j.jobe.2023.10784310.1016/j.jobe.2023.107843 ↗
25. Alhozaimy, A., Al-Negheimish, A., Alawad, O.A., Jaafar, M.S., Noorzaei, J., Binary and ternary effects of ground dune sand and blast furnace slag on the compressive strength of mortar, Cem. Concr. Compos., 2012, 34: 734–738. 10.1016/j.cemconcomp.2012.03.00210.1016/j.cemconcomp.2012.03.002 ↗
26. Anisur Rahman, M., Use of silica fume in stabilizing cement-dune sand for highway materials, AJCE, 2017, 5: 41. 10.11648/j.ajce.20170501.1610.11648/j.ajce.20170501.16 ↗
27. Xi, W., Li, Z., Zhou, Y., Li, G., Ji, F., Experimental study on mechanical properties of desert sand concrete under freeze–thaw cycles, Materials, 2025, 18: 1546. 10.3390/ma1807154610.3390/ma18071546 ↗
28. Bawab, J., El-Hassan, H., El-Dieb, A., Khatib, J., Effect of Mix design parameters on the properties of cementitious composites incorporating volcanic ash and dune sand, Dev. Built Environ., 2023, 16: 100258. 10.1016/j.dibe.2023.10025810.1016/j.dibe.2023.100258 ↗
29. Cheng, X., Hu, H., Li, Y., Long, G., Ma, K., Preparation and composite strengthening of desert sand artificial aggregates and their influence on concrete mechanical properties, J. Railw. Sci. Technol., 2025, S3050814225000093. 10.1016/j.jrst.2025.08.00210.1016/j.jrst.2025.08.002 ↗
30. Kog, Y.C., High-performance concrete made with dune sand, Mag. Concr. Res., 2020, 72: 1036–1046. 10.1680/jmacr.18.0007310.1680/jmacr.18.00073 ↗
31. Pearlmutter, D., Freidin, C., Huberman, N., Alternative materials for desert buildings: a comparative life cycle energy analysis, Build. Res. & Inf., 2007, 35: 144–155. 10.1080/0961321060098030910.1080/09613210600980309 ↗
32. Campagiorni, L., Tonelli, M., Ridi, F., Synergistic effect of limestone and supplementary cementitious materials in ternary blended cements, Curr. Opin. Colloid Interface Sci., 2025, 75: 101885. 10.1016/j.cocis.2024.10188510.1016/j.cocis.2024.101885 ↗
33. Puhan, S.B., A review of durability qualities for silica fume use in concrete, IRJMETS, 2025, 6: 3314. 10.56726/IRJMETS65582
34. Nasr, M.S., Hasan, Z.A., Abed, M.K., Dhahir, M.K., Najim, W.N., Shubbar, A.A.F., et al., Utilization of high volume fraction of binary combinations of supplementary cementitious materials in the production of reactive powder concrete, Period. Polytech. Civ. Eng., 2020. 10.3311/PPci.1624210.3311/PPci.16242 ↗
35. Gomaa, A.M., Samy, K., Karam, M.O., Abd Elsatar, Y.A., Mohamed, M.Z., Elnemr, M.S., et al., Improving High-Performance Concrete (HPC) by integrating nano metakaolin and silica fume, Adv. Sci. Technol. J., 2025, 2: 1–3. 10.21608/astj.2025.397863.1081
36. Arroudj, K., Zenati, A., Oudjit, M.N., Bali, A., Tagnit-Hamou, A., Reactivity of fine quartz in presence of silica fume and slag, Engineering, 2011, 3: 569–576. 10.4236/eng.2011.3606710.4236/eng.2011.36067 ↗
37. Allout, N., Douara, T.H., Guettala, S., Quéneudec, M., Combined effect of powdered dune sand and steam-curing using solar energy on concrete characteristics, Constr. Build. Mater., 2022, 322: 126474. 10.1016/j.conbuildmat.2022.12647410.1016/j.conbuildmat.2022.126474 ↗
38. Rabehi, R., Rabehi, M., Omrane, M., Physical-mechanical and fresh state properties of self-compacting concrete based on different types of gravel reinforced with steel fibers: Experimental study and modeling, Constr. Build. Mater., 2023, 390: 131758. 10.1016/j.conbuildmat.2023.13175810.1016/j.conbuildmat.2023.131758 ↗
39. Guettala, S., Mezghiche, B., Compressive strength and hydration with age of cement pastes containing dune sand powder, Constr. Build. Mater., 2011, 25: 1263–1269. 10.1016/j.conbuildmat.2010.09.02610.1016/j.conbuildmat.2010.09.026 ↗